Friends Rx8 Mazda Reman over rev damage
#1
Registered
Thread Starter
Friends Rx8 Mazda Reman over rev damage
He Push new Lap record by near 2 sec with help of 5.1 and ATS LSD and fresh set of 275 Re71RS
Last a perfect lap , sec lap engine just give up atv1/3
I suspect with stock S1 oil psi , and factory flywheel
Just simply too much for rotor to Handel
Last a perfect lap , sec lap engine just give up atv1/3
I suspect with stock S1 oil psi , and factory flywheel
Just simply too much for rotor to Handel
Last edited by Diyman25; 04-27-2022 at 11:25 PM.
#2
No respecter of malarkey
iTrader: (25)
I get that English isn’t your first language and no criticism for that is intended, but whatever you’re trying to convey here is not coming through. Obviously the engine is damaged and the title states overrev, but no real explanation relating the two or much else either. In general the oil pressure needs to be raised for an S1 track engine, but it looks like there is more than that going on given the damage. Given that it is a reman there could be any number of possibilities on what the causes are.
The following users liked this post:
Snox801 (05-03-2022)
#3
77 cylinders, 4 rotors...
My question also. Looks like some other things were going on. Was the peak rev logged?
Thread
Thread Starter
Forum
Replies
Last Post