For Sale 20B 3 Rotor
#1
Guest
Posts: n/a
For Sale 20B 3 Rotor
I have a stalled 20B conversion project with my 1993 RX7. I will sell the early spec JDM Cosmo engine for $3500. I also have all the other major components available to make a 550+ WHP RX Dream. All top quality race proven manufacturers and no Chinese junk. I will sell the entire project including the clean 1993 RX7 if interested. It needs very little to complete besides having the drive shaft shortened. $17,500. If you are serious PM me because I check my email often. Please only serious buyers!
#9
Rotor nut
iTrader: (2)
If you expect to sell this you need to give alittle more info for the serious buyers. These are just a few questions that I am interested in knowing:
1. Why does the drive shaft need to be shortened?
2. What kinda of subframe are you using?
3. How far back was the engine pushed from stock location?
4. Was it converted to NA?
5. Stock turbos?
6. What exhaust mani is being used?
7. Pre A series engine?
8. Fuel system used?
9. And finally, willing to part?
1. Why does the drive shaft need to be shortened?
2. What kinda of subframe are you using?
3. How far back was the engine pushed from stock location?
4. Was it converted to NA?
5. Stock turbos?
6. What exhaust mani is being used?
7. Pre A series engine?
8. Fuel system used?
9. And finally, willing to part?
#10
If you expect to sell this you need to give alittle more info for the serious buyers. These are just a few questions that I am interested in knowing:
1. Why does the drive shaft need to be shortened?
2. What kinda of subframe are you using?
3. How far back was the engine pushed from stock location?
4. Was it converted to NA?
5. Stock turbos?
6. What exhaust mani is being used?
7. Pre A series engine?
8. Fuel system used?
9. And finally, willing to part?
1. Why does the drive shaft need to be shortened?
2. What kinda of subframe are you using?
3. How far back was the engine pushed from stock location?
4. Was it converted to NA?
5. Stock turbos?
6. What exhaust mani is being used?
7. Pre A series engine?
8. Fuel system used?
9. And finally, willing to part?
#11
Senior Member
iTrader: (1)
http://www.rx7club.com/showthread.php?t=871594
This might help a little. PM might work better through 7 club.
This might help a little. PM might work better through 7 club.
#12
Guest
Posts: n/a
The drive shaft will not be the same length as stock because the engine was moved back about 1 1/2 inches. The engine cradle and oil pan are made with proprietary information that the new owner will get but it allows for hood clearance. I have coils, ACT 6 puk sprung clutch and I believe a 13lbs. flywheel ( I can't recall and have not found the receipt) New and modified RX7 engine mounts, Wolf 30 4.0 plus, Aeromotive pump 11101, filter 12304,element 12604, modified fuel pick up system, regulator 13109, hoses, fittings, lines etc... Marren injectors 3each 0585PI, 3each 0585, Mazda trix downpipe modified, JGS 60mm billet wastegate TK289, JGS 340 billet BOV TK195, Koyo 3 row radiator, battery relocated, Garrett blowzilla turbo, not certain if the intercooler plumbing will have to be changed. Tien coil overs, Kaaz LSD, ASA 18" rims. I'm sure I have over looked some stuff. My fabricator used to build my race cars in IMSA and developed GTP cars. He is a master and has over 2 decades of fabricating experience. I will not part out the car except to sell the 20B in "as purchased" from the importers condition.
Sorry guys but I'm old school. I have not had much luck with the treads so I put less information hoping interested parties will PM for specifics on a follow up phone call . I appreciate your post 8 Maniac. I have been inundated with PM's from kids, dreamers, time wasters and yoyos. The most recent PM I received asked if the $3500 motor was new? In my response to him I suggested he do some homework. My intent was to be constructive and efficient, sorry if I offended you. I get email notifications when I have a PM so please contact me that way to start a dialog. The last 3 rotor FD that sold at Barrett Jackson brought over $50000. There is plenty of time to finish this car and have fun with it before making a few bucks.
Thank you.
Sorry guys but I'm old school. I have not had much luck with the treads so I put less information hoping interested parties will PM for specifics on a follow up phone call . I appreciate your post 8 Maniac. I have been inundated with PM's from kids, dreamers, time wasters and yoyos. The most recent PM I received asked if the $3500 motor was new? In my response to him I suggested he do some homework. My intent was to be constructive and efficient, sorry if I offended you. I get email notifications when I have a PM so please contact me that way to start a dialog. The last 3 rotor FD that sold at Barrett Jackson brought over $50000. There is plenty of time to finish this car and have fun with it before making a few bucks.
Thank you.
Last edited by bpmfla; 11-10-2009 at 10:38 AM.
#13
Guest
Posts: n/a
I forgot to mention this. If you have a RX8 and want to do a 20b swap I would be willing to sell all the parts I have collectively for your conversion, minus the RX7 specific stuff. I am not interested in doing a you pick and choose garage sale kinda deal.
#16
Guest
Posts: n/a
Hey thanks for the confirmation! I have comfortably over 20k hard cash with numerous parts bought at wholesale direct from suppliers. That number does not reflect one penny for the fabrication. Somebody can save a honest 5 to 10 grand at my expense. If I get ann offer on one of my kids first I'm keeping the car.
#20
Registered User
Join Date: Nov 2012
Location: Johannesburg
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Did you sell it?
I have a stalled 20B conversion project with my 1993 RX7. I will sell the early spec JDM Cosmo engine for $3500. I also have all the other major components available to make a 550+ WHP RX Dream. All top quality race proven manufacturers and no Chinese junk. I will sell the entire project including the clean 1993 RX7 if interested. It needs very little to complete besides having the drive shaft shortened. $17,500. If you are serious PM me because I check my email often. Please only serious buyers!
Regards
Nick
#21
Ok? So I'm not sure how to PM any body or anything but I'm interest in the motor but I have no idea on how to contact u or even get wor out to u about the motor thi I my first asking and doing this thing on rx8 website so please message me at luv_saints@yahoo.com
And if u dont get a reply right away tex me at 334-413-3623
I'm interested in the 20b motor
And if u dont get a reply right away tex me at 334-413-3623
I'm interested in the 20b motor
Thread
Thread Starter
Forum
Replies
Last Post
SBGarage
Vendor Classifieds
0
09-06-2015 03:30 PM
SBGarage
Sakebomb Garage
0
09-06-2015 03:29 PM