{ FS } Renesis Race Engine Package in Virginia
08-06-2017, 07:13 AM
#1
Registered
Thread Starter
Join Date: Jun 2017
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Renesis Race Engine Package in Virginia
Category: Engine - Complete Motors
Price: $4900
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Others, Series I, Series II
Location (US State/Canada/Int): VA
Item Condition: Used
6 port motor freshly rebuilt by RP performance (0 hours) with all new Mazda OEM seals and gaskets. No engine oil or oil injection pump on this motor. It is set up as a dry sump motor with pre-mix fuel. I’ve swapped to a Peripheral Port motor on my Diasio 962R!
Moroso Dry sump 3 stage oil pump – 10 hours since rebuild – Stock filter pedestal & filter housing included if you prefer. Comes with 2 cog belts. Flat plate oil pan currently installed. High pressure oil bypass included depending on your use. Good for 10 GPM and 120 psi.
MicroTech ECU – includes ignition module and performance LS style coils, already tuned with a map to get about 260 HP at the flywheel. Complete wire harness included with relays and sensors. Programming Dongle and cable included.
AEM Wideband O2 – includes 3 - O2 sensors
Racing Beat Race Header – Coated with the White Lightning Swaintech exhaust Coating, Aluminum heat shield included. 3” V-clamp outlet
Intake – 2 with large throttle body, tuned injectors, custom airbox and air filter
Lots of extras with this package. All the hardware is there and it’s labeled. All the wires are labeled. There are lots of new extra gaskets, seals, injectors, water pump, stock coils, pick-ups, alternator with belts etc. You aren’t gonna find more Renesis engine stuff in one place. This would be great for a kit car or aircraft project
Pictures below
https://drive.google.com/open?id=0B4...y1rdnlTMFNIOTA
Contact Justin Willess at jwilless@itd-nc.com 540-230-9047 Located in Aldie, VA
Last edited by jwilless; 06-02-2018 at 01:09 PM. Reason: Price Drop
09-04-2017, 06:17 AM
#2
Registered
Thread Starter
Join Date: Jun 2017
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Price drop to $6k
$7k including shipping to Continental US– Almost everything you could want or need in a Renesis Race Package! Will not separate.
6 port motor freshly rebuilt by RP performance (0 hours) with all new Steel seals and gaskets. No engine oil or oil injection pump on this motor. It is set up as a dry sump motor with pre-mix fuel. I’ve swapped to a Peripheral Port motor on my Diasio 962R!
Moroso Dry sump 3 stage oil pump – 10 hours since rebuild – Stock filter pedestal & filter housing included if you prefer. Comes with 2 cog belts. Flat plate oil pan currently installed. High pressure oil bypass included depending on your use. Good for 10 GPM and 120 psi.
MicroTech ECU – includes ignition module and performance LS style coils, already tuned with a map to get about 260 HP at the flywheel. Complete wire harness included with relays and sensors. Programming Dongle and cable included.
AEM Wideband O2 – includes 3 - O2 sensors
Racing Beat Race Header – Coated with the White Lightning Swaintech exhaust Coating, Aluminum heat shield included. 3” V-clamp outlet
Intake – 2 with large throttle body, tuned injectors, custom airbox and air filter
Lots of extras with this package. All the hardware is there and it’s labeled. All the wires are labeled. There are lots of new extra gaskets, seals, injectors, water pump, stock coils, pick-ups, alternator with belts etc. You aren’t gonna find more Renesis engine stuff in one place. This would be great for a kit car or aircraft project
Pictures below
https://drive.google.com/open?id=0B4...y1rdnlTMFNIOTA
Contact Justin Willess at jwilless@itd-nc.com 540-230-9047 Located in Aldie, VA
6 port motor freshly rebuilt by RP performance (0 hours) with all new Steel seals and gaskets. No engine oil or oil injection pump on this motor. It is set up as a dry sump motor with pre-mix fuel. I’ve swapped to a Peripheral Port motor on my Diasio 962R!
Moroso Dry sump 3 stage oil pump – 10 hours since rebuild – Stock filter pedestal & filter housing included if you prefer. Comes with 2 cog belts. Flat plate oil pan currently installed. High pressure oil bypass included depending on your use. Good for 10 GPM and 120 psi.
MicroTech ECU – includes ignition module and performance LS style coils, already tuned with a map to get about 260 HP at the flywheel. Complete wire harness included with relays and sensors. Programming Dongle and cable included.
AEM Wideband O2 – includes 3 - O2 sensors
Racing Beat Race Header – Coated with the White Lightning Swaintech exhaust Coating, Aluminum heat shield included. 3” V-clamp outlet
Intake – 2 with large throttle body, tuned injectors, custom airbox and air filter
Lots of extras with this package. All the hardware is there and it’s labeled. All the wires are labeled. There are lots of new extra gaskets, seals, injectors, water pump, stock coils, pick-ups, alternator with belts etc. You aren’t gonna find more Renesis engine stuff in one place. This would be great for a kit car or aircraft project
Pictures below
https://drive.google.com/open?id=0B4...y1rdnlTMFNIOTA
Contact Justin Willess at jwilless@itd-nc.com 540-230-9047 Located in Aldie, VA
Thread
Thread Starter
Forum
Replies
Last Post
20b-3rotor
RX-8 Parts For Sale/Wanted
0
03-17-2015 08:22 AM