{ FS } A pile of OEM parts after the rebuild, Headers
#1
Registered
Thread Starter
iTrader: (8)
Join Date: Sep 2011
Location: Seattle, WA
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
A pile of OEM parts after the rebuild, Headers
Category: Exterior - Body Parts
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): WA
Item Condition: Used
I'm located in Edmonds, WA, 98026, local pickup is preferred, but shipping is available at your cost. SO, the prices are OBO, shipping not included.
OEM lower control arm set, both left and right, ball joints in good shape, one has some scuffing on the bottom, but in great structural shape. Mileage around 65k. $180 for both, $100 each.
Hood prop stick. All parts included, even have the bottom plastic holder if needed. $20
AEM cold air intake pipe fragment, 3.5in, the sticker is still in great shape $30
OEM 6speed shifter, pretty badly worn, will need to be repainted, missing the black lock ring on the bottom - $25
OEM foglights, both working, come with bulbs, although one bulb connector is chipped, connects securely. $30 for the bare one (driver side i think), $40 for the full one with the plastic mounting bezel (passenger side). $60 for both
Rubber side underbody runners, with most clips, one cut up exactly where the front mudflap is mounted. $20 for both
Under the hood heat shield. Not sure how I would ship this... unless i'd fold it. $30
Front bumper support bottom plastic tray -$10
Driver side, left, front wheel well liner, $30 (WILL TRADE FOR A LOWER DRIVER SIDE SPLASH GUARD)
Headers of unknown brand, the plaque was on one of the pipes but is now missing. Very little mileage before the donor car was upgraded to turbo. - $200
And a lot of miscellaneous parts
$20 for a battery holder/riser
$5 for air duct
$10 for front fender protectors (in place of mudflaps)
$10 for pre-rear wheel mini flaps
$25 for stock amber corners, one has a chipped tab, still very secure. Bulbs/wiring included
$20 for emblems
$30 for aluminum front bumper accent
$10 for front crash sensor (i think it is)
Feel free to ask any questions, thanks for looking.
Last edited by Dima_MX6; 08-07-2012 at 11:04 PM. Reason: Update
#8
Registered
Thread Starter
iTrader: (8)
Join Date: Sep 2011
Location: Seattle, WA
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
11Lepichichi - let's make it 33 shipped. Will ship out tomorrow if you paypal before noon - dmitriygjr@hotmail.com
Fostaface, I do have the lower left ball joint, but I would have to break the control arm to take it out... and you'd have to break yours to put it in. I dealt with the same problem a month or so ago. Anywho, you can buy a whole control arm, A LOT easier to replace that way. 110 shipped and its yours
Fostaface, I do have the lower left ball joint, but I would have to break the control arm to take it out... and you'd have to break yours to put it in. I dealt with the same problem a month or so ago. Anywho, you can buy a whole control arm, A LOT easier to replace that way. 110 shipped and its yours
Thread
Thread Starter
Forum
Replies
Last Post
ASH8
Series II Technical and Trouble shooting
7
10-30-2021 12:50 PM
AllSeeingChris
RX-8 Parts For Sale/Wanted
6
08-16-2015 12:35 PM