{WTB} Mazdaspeed Rear View Mirror Cover
#3
Registered
iTrader: (7)
Yes real MS part. I imported one for my FD in the early 2000's. Plastic cover made to appear faux carbon. I tried sourcing the part#, they do pop up every so often on the 7club.
This is a good start.
JP3 has been scanning everything he can find or buy into his 'media' but the links are down right now for some reason. Not sure why or for how long.
https://jp3motorsports.com/
In English
http://www.protegefaq.net/accessories/99mazdaspeed.pdf
This is a good start.
JP3 has been scanning everything he can find or buy into his 'media' but the links are down right now for some reason. Not sure why or for how long.
https://jp3motorsports.com/
In English
http://www.protegefaq.net/accessories/99mazdaspeed.pdf
#7
Registered
no kidding.. I’m talking about the muffler portion.. we all know S1 exhausts fit different on S2’s. But when you look at that picture of the single muffler design.. it’s the same as a stock S2. But I guess that is the same design as a S1 as I look at eBay junk... the S2’s do sound different too.. that’s what also made me believe Mazda was using old stock for S2 cars. You can still buy the MS strut braces for both front and rear from Mazda.. makes you wonder how much they made of certain parts that never sold.
#8
No respecter of malarkey
iTrader: (25)
Honestly, it really makes no sense why would you think/say/bring it up in this guys FS thread. Which I probably should have just ignored your previous response first, rather than this one.
you want to post it elsewhere, I’ll be glad to respond to your comment there instead
.
you want to post it elsewhere, I’ll be glad to respond to your comment there instead
.
#9
Registered
Is this the same thing you’re looking for?https://page.auctions.yahoo.co.jp/jp/auction/j680029971
maybe this one too:
https://page.auctions.yahoo.co.jp/jp/auction/t780457296
maybe this one too:
https://page.auctions.yahoo.co.jp/jp/auction/t780457296
#10
Registered
#12
No respecter of malarkey
iTrader: (25)
that’s also not officially a USA Mazdaspeed part
it may be from MS JP, but more often than not most of those MS parts offered on Feebay are non-Mazda aftermarket products
the full USA Mazdaspeed pdf catalog is attached for reference; NC MX5, RX8, M6, M3, & MS Turbo MX5 models
it may be from MS JP, but more often than not most of those MS parts offered on Feebay are non-Mazda aftermarket products
the full USA Mazdaspeed pdf catalog is attached for reference; NC MX5, RX8, M6, M3, & MS Turbo MX5 models
The following users liked this post:
SPYROS901 (03-20-2021)
#13
I am The One!
Umm, I think someone is missing the obvious point.. correct me if I'm wrong, but didn't the majority of RX8's come with autodimming mirror? In which case, even if you did get the OEM Mazdaspeed cover, you'll probably have to drill a small square hole into it to clear the sensor. Which is why I think they never bothered offering it for the 8.
Food for thought..
Food for thought..
#14
FULLY SEMI AUTOMATIC
iTrader: (9)
Umm, I think someone is missing the obvious point.. correct me if I'm wrong, but didn't the majority of RX8's come with autodimming mirror? In which case, even if you did get the OEM Mazdaspeed cover, you'll probably have to drill a small square hole into it to clear the sensor. Which is why I think they never bothered offering it for the 8.
Food for thought..
Food for thought..
#15
I am The One!
Well, if you go by the part # located in that brochure, you won't get any hits. Not exactly sure why that part number doesn't show up, but for whatever reason, it doesn't.
However, if you go by the FD part # (which I'm sure is the same for all these bolt on covers for these stock mirrors), you get a few hits online where you can pick them up.
Part # is: QYY1-v1-450-20 (taken from my RX7 catalogue for all Mazdaspeed parts)
Good luck!
However, if you go by the FD part # (which I'm sure is the same for all these bolt on covers for these stock mirrors), you get a few hits online where you can pick them up.
Part # is: QYY1-v1-450-20 (taken from my RX7 catalogue for all Mazdaspeed parts)
Good luck!
The following users liked this post:
Federighi (03-11-2021)
The following users liked this post:
Neo (03-11-2021)
#17
No respecter of malarkey
iTrader: (25)
that helped, it was a MS JP part for the RX8:
QYY1 V1 450 20
Discontinued
ABS resin cover that covers the rearview mirror body.
The "MAZDASPEED" logo is placed on the carbon pattern print and enhances the sporty look of the front view.
It cannot be installed on the following body numbers
Body No.DY3W 400001 ~
DY5W 400001 ~
DY3R 200001 ~
DY5R 200001 ~
.
QYY1 V1 450 20
Discontinued
ABS resin cover that covers the rearview mirror body.
The "MAZDASPEED" logo is placed on the carbon pattern print and enhances the sporty look of the front view.
It cannot be installed on the following body numbers
Body No.DY3W 400001 ~
DY5W 400001 ~
DY3R 200001 ~
DY5R 200001 ~
.
#18
Glad I brought back from the dead a part lol. Back in 07-08' i always laughed about it being ''fake'' carbon but i am trying to source all the stock mazdaspeed parts with the faux carbon hense the reason I am looking for it now.
Please guys keep in mind I am located in Europe and all the existing buy it now ads are x4 the price for me plus import taxes.
That's why I am looking from private sellers if by any chance someone wants to part ways with it.
Thanks Spyros.
Please guys keep in mind I am located in Europe and all the existing buy it now ads are x4 the price for me plus import taxes.
That's why I am looking from private sellers if by any chance someone wants to part ways with it.
Thanks Spyros.
Thread
Thread Starter
Forum
Replies
Last Post
dezau
Series I Exterior Appearance and Body Kits
1
02-27-2015 12:09 PM
RL8
Series I Interior, Audio, and Electronics
4
06-24-2011 04:42 PM