Greddy Turbo Kit + Other Aftermarket Items
 

Selling my Greddy Turbo Kit that [was incomplete] that I purchased here from another member. After much thought and countless headaches, I have decided not to follow through with keeping the kit. I have been sitting on this kit for many months, finding missing parts to complete the kit hoping the installation would go smoothly. I have spoken with other turbo’d members on this forum but I figure it won’t be as practical for me, so I am done modding this car, so I'm selling the turbo along with some of the aftermarket parts i feel i no longer need.

Towards the end of the install I started getting second thoughts because of aspects such as a high mileage engine [76k], and I have no reliable daily driver other than my 8. So now I have decided to part ways with this complete kit and just get a Miata as a DD, and redo this whole turbo build later on when i get a hold of a fresh or low mileage engine and have finances/priorities cleaned up.

Parts list
• T618Z Turbo charger [I bought it with one of the studs sheared off. I had the stud replaced by Tri-Point Engineering]
• Exhaust Manifold - Had a hairline crack that was re-welded as a precaution.
• Downpipe w/ Bracket - Heat wrapped/ extra Bung welded for A/F sensor
• Narrowband BOSH O2 sensor for AFR Gauge
• Intercooler - One side was painted black with high Temp Paint
• Custom Brackets for intercooler [if your using MS Cai/AEM Cai]
• All Suction/Compression IC pipes
• MM Greddy fix #2
• E-Manage w/ Harness (Blue)
• Greddy BOV Flange welded w/ nipple on TB pipe
• NGR BOV w/Gasket[Similar to Greddy Type S, but with stronger Diaphragm]
• Air Pump pressure hose
• Vacuum hose
• All necessary gaskets
• Oil feed/return lines
• All Hose Clamps
• Male to Male fitting for oil feed line
• APT oil restrictor
• APT Nuts
• APT Studs [already affixed to turbo and exhaust manifold]
• APT Bolts
• TreadStone Performance Couplers
• All Hose Clamps
• Prosport Boost gauge w/ hose and T
• Prosport AFR Gauge
• Prosport Oil Filter Sandwich plate [instead of T-ing off one of the lines for oil feed]
• Recirculation Bung welded on Post MAF piping for BOV [done at Turbo Performance]
• Flexible Radiator Hose for recirculation
• Heat-Shield w/adhesive backing

The only thing I know is missing is the intake manifold block off plate, which is not necessary if you plan on using the MM Greddy fix #3 [Cobb AP] and the airnex filter, which can be purchased elsewhere, but it is not recommended to use that intake because of the diameter of the greddy pipe and location of the filter. Either make a custom CAI or get a hold of the MS/AEM intake.

$2,250
$1,750 SHIPPED! OBO Paypal Only unless Local pickup. [Good iTrader score]
SOLD!

Willing to let the Lotek Gauge Pod/prosport water temp gauge with racing beat sensor go as well with the turbo kit if it is still available by the time of purchase.

Also Selling
MazdaSpeed CAI w/Jacket or sleeve $190 Shipped PENDING MinHoSII SOLD
JIC 4 Point Strut bar $170 PENDING comebackqid
Lotek Gauge Pod glued to OEM Dash $30 Shipped + YOUR Stock dash piece SOLD
Prosport Water temp Gauge with Racing Beat Sender $60 Shipped SOLD
Carbon Fiber Trunk [fitment 6/10] $120 LOCALS ONLY SOLD
EVO-R Carbon fiber lip spoiler $160 LOCALS ONLY
RaceRoots replica INGS spoiler. fits like crap, but if you want to work with it, you can take it for FREE. LOCALS ONLY
OEM Spare tire kit with cover and mounting hardware $250 LOCALS ONLY.
For the Shipped items it will take me a couple days to get packaging materials.

Please no "thread-crapping" and it is best to PM me as instead of just posting in this thread to ensure i get a message.

Some Photos [To Be Updated..]
Attachment 238110
Attachment 238111
Attachment 238112
Attachment 238113
Attachment 238114
Attachment 238115

yo I'm in lancaster, CA (30-45 min away.)
you got pics of the CF trunk?

pm'd for gauge pod

subbing for interest.

Christmas day bump!

Price lowered. need money for a DD!

$1,750 SHIPPED! OBO Paypal Only unless Local pickup. [Good iTrader score]

Willing to let the Lotek Gauge Pod/prosport water temp gauge with racing beat sensor go as well with the turbo kit if it is still available by the time of purchase.

+1 for CF Trunk. need pics

Pm'd about the cai

Bump for a good deal and a good guy.

Sorry to see you gave up but forced induction is a big step, glad to see you are being responsible.

Likewise...

yea, i started to realize that, did not seem like the right time to follow through with it.

oh and we found the problem besides the missing "mesh" or "fins" that i forgot to put post MAF on the CAI [that Gregs pointed out]. one of the hose clamps was loose causing a leak near the right engine mount. the clamp was at an awkward angle so when i tried to tighten it it seemed pretty firm. but when we were taking apart the turbo kit, with the car jacked up it wasn't tight at all, and the coupler could slide right off.

this is one of the kits bought from nj right? what else do you need to complete the install?

just made an account on this website and i have NO idea how to "post" my own things cuz i have questions and im sorry for asking you but ... i looked everywhere... damn :p thanks

Yup.
Basically the only thing I can remember would be a Cobb ap with mm tune

still waiting on pics of the trunk....

@ work post pics in a bit

best i could do at this time.
fitment is off, had to remove weather striping, chip down the fiberglass around the trunk latch so the latch would sit lower and precise amount of washers per bolt to align somewhat decent.
Attachment 238090
Attachment 238091

this is with the EVO-R CF lip spoiler which i am also selling separately for 160. has a mild thumb sized blemish.

willing to ship cf lip?

maybe but prefer not to.

more pics of CF trunk, EVO-R lip spoiler and INGS Spoiler

Attachment 238075
Attachment 238076
Attachment 238077
Attachment 238078
Attachment 238079

Man I would like that lip spoiler. Damn you Christmas.

PM'd you about the CF trunk.

Local, cash in hand.

Thanks!

:]

PM'ing you, i want that CF lip spoiler. I'm Local!

whats up man im the guy that sold you the air box today. Ah man the that spoiler lip looks nice.

I'm interested in the MS CAI if your current buyer falls through. Let me know!

lol.... finally:evil_laug