Engine Block Partout! - Rear Rotor, Iron, & Housing; OMP; Oil Pan + More
I'm updating this thread with new parts for sale.
Prices and Pictures for New Parts are listed immediate below: These parts are from a 2006 MT with 70k. The engine lost an apex seal on the front rotor, damaging that rotor, housing, and both intermediates. These are the parts I have left over. Items are located in Meriden, CT All Prices are OBO and buyer pays shipping. Because of my low post count, please feel free to check the links in my signature to my other accounts as a vote of confidence. For quickest feedback, comment in this thread or email me at adshain@gmail.com Thanks, Alex -------------------------------------------------------------------------------------------------------- SOLD - Rear Rotor Housing – Great shape, no chrome flake or gouging $200 Pic1 Pic2 Pic3 Rear Rotor – Good bearing, side seal slots are fine, apex seals look a bit worn but not damaged. $150 Apex1 Apex2 Apex3 Stamp Face Bearing Rear Iron – Good shape, minimal step wear, No grooves , All ports are good. $100 Pic1 Oil Metering Pump– Passes factory service manual resistance test, no damage to housing or plastic $200 Pic1 Oil Metering Pices - No cracks or leaks $25 Pic1 Coils – Supposedly replaced a few months before the front rotor died, includes 4 coils, no bracket. Sorry, no pic. $50 Upper Intake, Solenoids, and Oil Filler - No cracks or damage, Includes knockoff mazdaspeed filler cap $70 Pic1 Pic2 Oil Pan - No major dents or damage $40 -------------------------------------------------------------------------------------------------------- COLOR="blue"] Rotor #1[/COLOR] $225 PIC: Face 1 PIC: Face 2 PIC: Apex Groove 1 PIC: Apex Groove 2 PIC: Apex Groove 3 Rotor #2 $225 PIC: Face 1 PIC: Face 2 PIC: Apex Groove 1 PIC: Apex Groove 2 PIC: Apex Groove 3 -------------------------- Rotor Housings: Average chrome flaking for mileage. Could work for a budget rebuild or for display purposes. Housing #1 $60 $45 PIC: Bottom face PIC: Top Face Housing #2 $60 $45 PIC: Bottom face PIC: Top Face -------------------------- Side Housings / Irons: In great shape with average wear for mileage. Front Iron $150 $100 PIC: Front Iron Center Iron $150 $100 PIC: Center Iron Front Side PIC: Center Iron Rear Side Rear Iron* $70 $50 *In great shape, but has a tension bolt stuck in a lower stud hole. Would be completely usable with a little work. -------------------------- Misc.: Front Cover w/IGN pickup and tensioner $60 $45 PIC: Front Cover |
Bump. Make me some offers!
Posted from Rx8club.com App for Android |
make me some offers!
Posted from Rx8club.com App for Android |
To the top
Posted from Rx8club.com App for Android |
How much for the set of rotors together
|
Bump! Make some offers, guys!
|
really? no offense here but ..
I got a brand new rotor for a bit more than your "offer" and those housing ... I wouldn't even use it for a "budget rebuild", they are junk. and the iron ... u can even tell the rotors "kissed" the iron quite often ... |
Originally Posted by nycgps
(Post 4418060)
really? no offense here but ..
I got a brand new rotor for a bit more than your "offer" and those housing ... I wouldn't even use it for a "budget rebuild", they are junk. and the iron ... u can even tell the rotors "kissed" the iron quite often ... |
Both rotors are sold!
Posted from Rx8club.com App for Android |
Rotors shipped. Everything else is still available
|
Ttt
|
Bump!
|
Send me some offers, guys!
|
Prices have all been reduced.
|
Bump!
|
SOLD - Rear Rotor Housing – Great shape, no chrome flake or gouging
$200 Pic1 Pic2 Pic3 Rear Rotor – Good bearing, side seal slots are fine, apex seals look a bit worn but not damaged. $150 Apex1 Apex2 Apex3 Stamp Face Bearing Rear Iron – Good shape, minimal step wear, No grooves , All ports are good. $100 Pic1 Oil Metering Pump– Passes factory service manual resistance test, no damage to housing or plastic $200 Pic1 Oil Metering Pices - No cracks or leaks $25 Pic1 Coils – Supposedly replaced a few months before the front rotor died, includes 4 coils, no bracket. Sorry, no pic. $50 Upper Intake, Solenoids, and Oil Filler - No cracks or damage, Includes knockoff mazdaspeed filler cap $70 Pic1 Pic2 Oil Pan - No major dents or damage $40 |
I will take the rotor housing.
|
Rotor housing pending to RotaryResurrection
|
Housing sold, rotor pending
|
Rotor and housing sold and shipped! Everything else is available.
|
Everything but rotor and housing are available. Feel free to make offers on everything else.
|
All parts but the rotor and housing are still available. All prices are OBO!
|
Make me some offers. I'm tired of looking at this stuff
|
I'm in need of the housings please let me know what you would take the mechanic tore apart my motor and my oil injectors were melted and and burnt slot up so please let me know
|
Housings are long sold. This thread is from 2015.
|
All times are GMT -5. The time now is 06:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands