|
CO: parting out 4port renesis and accessories
2 Attachment(s)
Hi all, I'm parting out a 4port renesis due to getting carbon locked and breaking some apex seals. There are still lots of items that are in good shape, so let me know what you need.
Buyer pays shipping. PayPal only. Attachment 228555 Attachment 228556 |
dibs on blue injectors please will you take $60 shipped to 19801
are any of the housings in usable condition? How's the center iron? Eshaft? Bigger pics of everything? Is one of the rotors usable? |
The center iron looks good on one side so far, I will have it apart this week.
The housings are ok so far, and the one rotor I have out at this time has a small gouge on one of the flank cuts but other than that one it is ok. The eshaft is immaculate Blue injectors: sale pending to you! P.S., more pics on the way! |
Ill take the rotor shipped to 33436
|
6 Attachment(s)
More pics!!!
Attachment 228544 Pulleys, flywheel, etc Attachment 228545 Intake group Attachment 228546 OMP and fuel group Attachment 228547 Tension bolts, dowels, oil injector nozzles Attachment 228548 All pulled apart going to the solvent tank Attachment 228549 E-shaft all cleaned up and PERFECT! I had guy look at all of this when I was taking it apart, he's been rebuilding rotaries for about 30 years now, and they're all he drives.... He said the intermediate and front complete assemblies were perfect! |
can any of you guys post a pic of the plug on the ither end of the orange plug so i can see where the wires go mine does not have the plug and im just looking to harwire it
|
paid for blue injectors.
|
so wat happened here?
|
I got a pm from prl 84u before you posted, I'm really sorry, but everything else is still up for grabs!
|
Originally Posted by alan49121
(Post 4400799)
can any of you guys post a pic of the plug on the ither end of the orange plug so i can see where the wires go mine does not have the plug and im just looking to harwire it
I don't quite understand what you're looking for here |
What do you need to hardwire? I may have the harness!
|
E shaft, $80 shipped
Front rotor, $80 shipped Front housing, $80 shipped Flywheel, $25 shipped Lower intake, $50 shipped Upper intake, $40 shipped Oil filler assy, $20 shipped Secondary fuel rail, $15 shipped Counterweight, $15 shipped Plenty more stuff here, PM me! |
Are you selling your oil lines maybe?
|
Sure am! Shoot me an offer through PM!
|
I also forgot, all the irons are good!
Other items available: Front cover: $30 shipped Oil pump: $40 shipped Oil pump drive gears with chain: $30 shipped Oil pickup: $5 shipped Oil pressure sensor: $10 shipped Water temp sensor: $10 shipped |
Originally Posted by Fr430n
(Post 4401237)
E shaft, $80 shipped
Front rotor, $80 shipped Front housing, $80 shipped Flywheel, $25 shipped Lower intake, $50 shipped Upper intake, $40 shipped Oil filler assy, $20 shipped Secondary fuel rail, $15 shipped Counterweight, $15 shipped Plenty more stuff here, PM me! IF there is another rotor and/or rotor housing available I'd also buy those. |
Yes, they are avavailable. I will work on getting more pics up here and a better description within 2-3 hours!
|
9 Attachment(s)
Attachment 228494
E shaft Attachment 228495 Rear iron Attachment 228496 Intermiediate iron Attachment 228497 Intermediate iron (other side) Attachment 228498 Front iron Attachment 228499 Front housing (very good condition) Attachment 228500 Counterweights, flywheel, front stationary gear (all good shape, rear still attached to iron) Attachment 228501 Front rotor, very good shape, lots of carbon but I cleaned a lot from it Attachment 228502 Rear housing, found to be "jacked" upon inspection P.S. I will trade the rear housing and rotor as decoration for a BB OEM front lip |
3 Attachment(s)
|
^^^^^
All 3 corners of that front rotor |
Okay, PM me with payment info for the good rotor housing, rotor, eshaft, rear counterweight. I'd also like to offer some suggestions on how to package this stuff so that it survives shipment (and can be shipped all in one package most likely).
I take it that the rotor that went to that gouged rotor housing is "jacked" also since I don't see it in the pics or description? |
Yeah... I had a pic of it, it had a really big gouge in one of the flank cuts, if you can fix that, then I suppose the 2nd rotor could be used, I'm just afraid to sell something that could cause build issues.
|
paypal sent for rotor, rotor housing, eshaft and counterweight.
|
Rotor, rotor housing, eshaft and counterweight sold!
Still got plenty more stuff!!!! |
Rotor, rotor housing, eshaft and counterweight sold!
Still got plenty more stuff!!!! |
| All times are GMT -5. The time now is 11:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands