04 engine part out
5 Attachment(s)
I have a ton of engine parts available after a swap. Here are a few others parts I have but I am still doing inventory. All parts are obo so just make me an offer.
$20 - upper intake (just the filler neck and secondary intake for a 6 port) $50 - lower intake $40 - air pump $20 - water pump w/pulley omp w/lines - sold $20 - oil filter mount w/oil cooler line $75 - e-shaft $50 - front cover engine wiring harness - sold $50 - exhaust mani $20 - air control valve oil pan - sold $20 - counter balance (MT) $40 - set of used stock coils(unsure of miles but they do work) $60 - Alternator and bracket $30 - ESS position sensor Tensioner - sold $75 - Pass side headlight w/ HID ballast(lens cracked but still works, will need new lens) Still missing a few pics, but if you are interested in something that is not on here, let me know and I will get a pic for you. |
Do you basically have the whole engine?
|
Originally Posted by logalinipoo
(Post 4593445)
Do you basically have the whole engine?
|
more pics
4 Attachment(s)
:ylsuper:
|
and more
4 Attachment(s)
:rock:
|
last one
3 Attachment(s)
:mchase:
|
Real talk man, those irons are JUNK. Please scrap them and do not sell them to anyone. That is major heat damage from the rotor physically rubbing the iron walls due to insufficient lubrication (and usually a badly damaged or spun bearing). That kind of damage cannot be doctored up, repaired, or resurfaced in any way. It's likely that the e-shaft is not great either, but I can't tell based on your pic.
How much for the OMP? |
Agreed that the irons are not usable. I was not looking for a payday on them at all. I am a big DIY guy and I know there are others out there like me that want to "test there skills". I was just putting them out there in case someone want one to practice on before trying to lap a good one. If some one wants them both for like $20-$30 bucks and they want to either come get them or are willing to pay for shipping, I am more than willing to do that. This is also the reason I have not set any prices. I have tested the omp, and I know it works great. Ill take 40 + shipping.
|
sold on the omp, I am in 37814 for shipping purposes, what is your paypal?
got a stock flywheel? how much shipped? how much for the oil pan and pickup? and that little a/c tensioner too, how much for that? |
Originally Posted by RotaryResurrection
(Post 4593908)
sold on the omp, I am in 37814 for shipping purposes, what is your paypal?
got a stock flywheel? how much shipped? how much for the oil pan and pickup? and that little a/c tensioner too, how much for that? don't have an extra flywheel, sorry. ill do 40 on the oil pan w/pickup, and 20 for the tensioner. I'm sure we can get it all in one box and save on shipping. I'll have to get it weighed to figure out shipping and what priority you want. |
Originally Posted by surfnlow
(Post 4593912)
paypal is surfnlow@gmail.com
don't have an extra flywheel, sorry. ill do 40 on the oil pan w/pickup, and 20 for the tensioner. I'm sure we can get it all in one box and save on shipping. I'll have to get it weighed to figure out shipping and what priority you want. I'll take just the OMP then. CHeck for a USPS priority regional rate box A. That thing can ship for like 6 bucks flat rate and the OMP should fit inside it easily. You can gently bend the lines in the center, just not at the ends. Otherwise, a USPS Medium flat rate box will work too. Let me know when you have it figured out and I'll send you the total. |
If you really want them, I'll throw the tensioner in. $80 + shipping for all 3. I am just trying to get some cash together for some apex seals. If you have some seals, we can make a deal.
|
I do have a spare set of mazda OEM rx8 apex seals hanging on the gasket wall. :naughty:
|
Originally Posted by RotaryResurrection
(Post 4594020)
I do have a spare set of mazda OEM rx8 apex seals hanging on the gasket wall. :naughty:
|
brand new in the wrappers, no need for pics lol.
Mazdatrix sells them for $333.72/set plus shipping. Cart Price Check Part:11-C00J-N3H1 Atkins sells them for $330/set plus shipping. 04-11 Rx8 Mazda OEM Apex Seal Set (N3H1-11-C00) I'd want $330 shipped for mine, and I'd give you $100 (shipped) credit toward your stuff. |
I think I would rather the cash. I got a discount from rotaryaviation for their super seals that I don't want to waste.
|
Rotary aviation seals :uhh:
That's cool though, I wasn't really looking to sell mine, just thinking of helping you out. So back to the parts themselves, $100 shipped for the oil pan, a/c tensioner and OMP? |
Sounds good as long as shipping isn't crazy. I am going to see if I can get it in a flat rate box. Ill let you know tomorrow.
|
So, should I go on and paypal you the 100, or...?
|
Originally Posted by RotaryResurrection
(Post 4594399)
So, should I go on and paypal you the 100, or...?
|
OMP, oil pan and tensioner sold. Still got a lot of good parts left. Let me know what you need!
|
bump
|
bump to the top
|
Still got a lot of parts up for grabs. Let me know what you need.
|
Added a cracked Pass side headlight. I was going to keep it and just swap out the lens but I am needing the money more to get my 8 back on the road.
|
Bumpity bump bump bump
|
do you have the purge valve and air solenoid valve
|
Originally Posted by Clsmooth954
(Post 4598782)
do you have the purge valve and air solenoid valve
|
its behind the intake manifold. but i just need the purge
|
Originally Posted by Clsmooth954
(Post 4598978)
its behind the intake manifold. but i just need the purge
|
bump time. Still got a lot of parts. I do have 3 unusable housings that might be good for a trophy or paper weight. I will be scrapping them soon if I don't get any takers. $20 a piece +shipping or $50 for all 3 + shipping.
|
bump
|
bump to the top
|
Would you happen to have a stock cat laying around that you would like to get rid of?
|
Just have the one I am using....sorry. :(
|
bump
Prices not set in stone guys. Make me some offers. I am going to take the irons and housing to the scrapyard next week if nobody wants them, but everything else is still available. |
bump
|
Still have that headlight.
|
Sure do!
|
Do you have any of the three control solenoids from the upper intake manifold - one is for the secondary air intake. I'd like to pick up a spare.
|
Originally Posted by fixitall
(Post 4609947)
Do you have any of the three control solenoids from the upper intake manifold - one is for the secondary air intake. I'd like to pick up a spare.
|
Sent you a PM about some of your parts.
PS and you can ignore the request for your Paypal. i read through the thread again and see that you posted it. :) |
Originally Posted by diabolical1
(Post 4610392)
Sent you a PM about some of your parts.
PS and you can ignore the request for your Paypal. i read through the thread again and see that you posted it. :) |
Just bought a donor motor core so I will have some more parts to post soon. Once it gets here and I get it inventoried, I will post the parts that are usable. I should have an extra housing and some irons hopefully Thanks for looking!
|
Do you have the clutch line that comes from the slave all the way to transmission? If so are you willing to sell it shipped to 60448?
|
Originally Posted by jtizzle88
(Post 4612547)
Do you have the clutch line that comes from the slave all the way to transmission? If so are you willing to sell it shipped to 60448?
|
Hey I was woundering if you had a left hid headlight assembly
|
Originally Posted by sunday620
(Post 4612606)
Hey I was woundering if you had a left hid headlight assembly
|
you have interior parts?
|
Originally Posted by l3eltinck
(Post 4613472)
you have interior parts?
|
All times are GMT -5. The time now is 12:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands