wow nice work there!

cant wait to see the finished product...looks great

I should have more pictures Friday working on large exhaust tip looks sick. Thanks for all the support.

Here are some pictures of rear not complete yet , total width 75" rear. Rear tires are 12" wide 275 30 19".

sorry had to resize pictures

It's gonna look sick! RX8 already has a sorta sidebody look with those bulging fenders but this takes it to another level.

LOoks great, how did you do the led in the head light

I made to led head lights

This does look quite good!

Alot better then other wide bodys for the 8

I have an idea of the time, effort and talent it takes to do this... hat's off to you in that regard, but this is simply not my style. would have to pass.

Also, you lost your suicide doors! say it isn't so !!!

Could you tell me how you made them

You will have to cut your headlights apart. Then drill in leds and run wires to your parking lights. I will be offering this option in the future. I hope to be at some east coast car shows starting Feb.

Still a lot of work to complete.

Will be at Daytona 24 hour This weekend with car.

Nice project but I don't like it. Sorry.
Rear huge openings in a car that has the engine placed in the front is pure fail. Running with a parachute would be the same thing.

Most front engine race cars with rear intakes us air to cool rear brakes. Also with the front side fender being out that far it will not allow a lot of air into the rear.

But thank

here are a few examples

I see one race car with little vanes, a failside rx7 (definitely not a race car and slower than the stock rx7 too...) and another show car.
You should take this kind of car into consideration instead:
http://www.apartment107.com/assets/a...1568/pic03.jpg

The rear reminds me of a Lotus

you do know that is a rear engine prototype. A few of my friends have some like that similar to a shelby can am

I race with that exact car in gt5 LOL

I like the Lambo kit car. Did you put that together?

Uhm... i do notice a fuel tank in the back...
http://image28.webshots.com/28/6/7/8...8BMKkvN_fs.jpg

:scratchhe

The RE amemiya GT300 is definately not rear engine :uhh: 2:45 mark

http://www.youtube.com/watch?v=qwzRu...eature=related

This is the only Mid engine Rear orientation rotary I know of(other than the classic 787s), it participates in the Belgian Touring Car Series.

http://i56.tinypic.com/ayvl7c.jpg

http://i55.tinypic.com/2j67a76.jpg

http://i52.tinypic.com/2e69feh.jpg

http://www.youtube.com/watch?v=1zl7G...eature=related

http://www.youtube.com/watch?v=odAt_...eature=related

http://www.youtube.com/watch?v=sFA-G...eature=related

20B go Boom

http://www.youtube.com/watch?v=5qDrLFbewa4

dyno

http://www.dailymotion.com/video/x4z...-20b-tber_auto

:lol: could that eyebrow be any lower, how do you see to drive out of that thing?!? :D:

Its like any race car, the seat is much lower than an actual 8 to lower the center of gravity

wheels
 

i have rx8 2005. and i want to work on ti, the color is gray. first thing i wanna do is to get me some nice wheels and lower it . any ideas?

I dunno dude, take a look at this pic again, even with a lowered seat it looks like you'd need a periscope to drive it, then if you're wearing a fullface? yikes. :lol: (I'm about 5'6-7", it'd be a struggle even for me)

http://i55.tinypic.com/2j67a76.jpg

edit: nevermind, I think I figured it out, you just have to roll straight gangsta' style :D:

http://safety-road-safety.com/images/FIGUK/i11.jpg

Megan racing makes some lowering springs that can be add very easy. Or you can get full adjustable.

Maybe he is a midget. Or sitting on the floor pan

Interior shot

http://i52.tinypic.com/2gy92fd.jpg

that paint drawing is hilarious lol

dang, that is really pushing it, would totally love to do mine that low though as I can see where it would be really helpful for glare. Thanks for the pic, I was too lazy to look for one :lol:

Like most race cars the entire dash is also pushed lower to accommodate such a low driving position. You can see how much lower when you look at the role cage position on the far door where our tweeters usually are. Lois like the dash has been lowered about 3-4 inches.

dude---dont know about the rear end-----the exhaust is not my cup of tea. Maybe one like the LFA would be cool?
I have oftern wondered about where the license plate goes--what do you think about a smaller custom place on the trunk and then that big area on the bumper could be filled in and smoothed all the way across. That would allow more balance with the diffuser and single site exhaust?
Just throwing stuff out there.
Very low profile roof vent?
Really like the front--you know what would be really cool?
Center steering wheel position!!
you got the touch bro--congrats.
OD

^^^ Like so, I agree

http://i52.tinypic.com/2a8n42a.jpg

or the Ferrari 458 Italia

http://www.carztune.com/wp-content/u...8-Italia_6.jpg

I have ordered my 3 rotor engine and hope to start install June this year. I plan on doing some car shows prier to removing exsting engine. Looking to do a 400hp to 500hp set up.[/QUOTE]

put the 20b in the atom:ylsuper:

^ Where did you order from and how much did you pay? Just curious!

^^^ Im curious about the post and why its here??? :Wconfused

omg this is fantastic

he ordered from extreme dimensions, fit perfect right out of the box, and only about 200 dollars, it was amazing

:lol: yeah, they make AWESOME stuff!!111 :lol::banghead:

You guys are so funny (no i got it for free as a b-day gift jk.) All you have to do is go on ebay Japanese Performance Engines it was 4000.00 with shipping from Canada, and yes they have more about 10.

Also roto what do you mean why is this posted here?

Any updates? pics? :)

I would love to see how the car is coming along!!!

I will be posting updated pictures Thru, or Friday next week.

^^ cool

the front is kool

the back is horrendous

Good job.... Nice sides like the Venom Hennessey... The rears looks corvette... Good job on the work...

The exhaust part is admirable... Just get the inner depths painted black and u should be fine...


PS: u want those thin fins on?