those evo tt looks bad ass than others :rock:
|
are those tips riveted on?
|
Originally Posted by nuke0907
(Post 3101043)
are those tips riveted on?
|
Originally Posted by Bryan@BNR
(Post 3091829)
Just zip tie the 2 water lines together where they come off the fittings. That should keep the lower rubber line from resting on the actuator arm. Looks like a good fit to me! Also looks pretty easy to get to on the car as well.
I may put a 45 degree barb fitting there just to make it easily bolt up. Bryan@BNR |
today finally had some free time to finish my car! took it for a short drive not going into boost, car drives very smooth, no idle issues and my greddy evo exhaust is soo quiet! night and day difference between my hks hi-power (ill post some videos hopefully next weekend of the nice exhaust tone)
|
now get Kane or someone experienced to tune that puppy and make some power!
|
Let me know when you get her tuned! As we talked about earlier, I am almost inspired to go FI. and....er....um.....just need some inspiration
|
^^im sure once you go for a ride you will be convinced my friend!...lol
|
I was having the same problem with ideal. After boosting a few times won't stay running at the dam lights. What flash or ecu r u using. I'm running an anchent michrotec an a shitty esmirl turbo or should I say was.
|
lookin good love the exhaust sooo sexy
|
gregs, grats on finishing up the install. I wanna go for a ride when it's tuned. :)
|
Have you managed to up the boost yet greg ?
|
Originally Posted by rodjonathan
(Post 3301705)
lookin good love the exhaust sooo sexy
|
Originally Posted by Jedi54
(Post 3301738)
gregs, grats on finishing up the install. I wanna go for a ride when it's tuned. :)
|
Originally Posted by Brettus
(Post 3301789)
Have you managed to up the boost yet greg ?
|
Originally Posted by gregs
(Post 3302003)
not yet, but i havent put much time into it, car is currently in the body shop getting a light makeover. i should have my car back hopefully at the end of next week..then im going to do some datalogs and find out what my afr's and g/sec im pushing with the boost controller turned off...then depending on what i see im going to start tinkering with the boost controller..also noticed my greddy profec b spec II boost controller reading is about 2 psi higher than my prosport boost gauge. im planning on entering high boost levels with caution this time..haha
sounds like a good plan :) My profec was 1 psi higher than my boost guage as well - on the dyno the profec was the same as the dyno reading so thats what I go with now .... |
Originally Posted by Brettus
(Post 3302004)
sounds like a good plan :)
My profec was 1 psi higher than my boost guage as well - on the dyno the profec was the same as the dyno reading so thats what I go with now .... |
happy troubleshooting, looking forward to a ride when she's ready:naughty:
|
gregs where did you ever find gaskets to rebolt your turbo kit on?
|
Originally Posted by legendkurado
(Post 3302113)
gregs where did you ever find gaskets to rebolt your turbo kit on?
im glad theres other options for sourcing gaskets other than greddy mainly because it takes too darn long |
very nice!
|
thanks for the info greg and great pics and install btw
|
made a couple of "wot" runs tonight big thanks to ngo for plotting my runs! let me know what you guys think..btw: jeff (MM) & bryan (BNR) the turbo upgrade and tune kick ass... these runs are done without the boost controller turned on so it hits 5 psi and holds to redline
on my prosport electronic boost gauge http://farm3.static.flickr.com/2601/...1f39c799_o.jpg http://farm3.static.flickr.com/2629/...bf66bcbe_o.jpg I think its time to start messing with the boost controller |
just wanted to post some pics of a few new additions i hope to install real soon
http://farm3.static.flickr.com/2694/...1aec969e79.jpg http://farm3.static.flickr.com/2768/...46541fe493.jpg My Favorate part of the package:lol2: http://farm3.static.flickr.com/2708/...1795733d4a.jpg Big thanks to Ray @BHR got my package way faster than i expected, some of the best customer service and help you could ask for :icon_tup: |
Originally Posted by gregs
(Post 3316320)
I think its time to start messing with the boost controller 340g/s is optimistic for 5 psi .... |
All times are GMT -5. The time now is 08:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands