Notices
RX-8 Discussion General discussion about the RX-8 that doesn't fit in one of the specialty forums.
Sponsored by:
Sponsored by: CARiD

Sound of tearing plastic @ high revs

Old Dec 21, 2008 | 03:53 PM
  #1  
families81's Avatar
Thread Starter
Mars
 
Joined: Jan 2008
Posts: 49
Likes: 0
From: CA
Sound of tearing plastic @ high revs

HI guys

I noticed when I hit above 6000rpm and only above 6000rpm there is this weird sound coming from the front of passenger side, it seems like its comming from behind the glove box.
It sounds like some plastic pieces are being tear apart. The harder I get on the gas the louder it gets. However, the car still drives very well without any problem, at least there isnt any now.
It happens on both cold and warm weather no matter raining or not.
5000miles on it, last oil change was around 2000mile

Does anyone here had experianced the same?
Could it be the sound of burning left over carbon inside the engine?
Any input are appreciate. Thanks
Reply
Old Dec 21, 2008 | 04:03 PM
  #2  
kersh4w's Avatar
Hit & Run Magnet
iTrader: (3)
 
Joined: May 2007
Posts: 6,690
Likes: 3
From: DC Area
does it sound like marbles in a can? or marbles in a blender?

if it does, thats pre-detonation. you need to be using better gas. 91+. if you do, and it still happens.. uh.. dealership time.

but dont worry yet. im pretty sure there is one other thing that causes a sound behind the glove box and its not terrible. i just forgot what it was.
Reply
Old Dec 21, 2008 | 04:25 PM
  #3  
05rex8's Avatar
sold the 8... :(
iTrader: (7)
 
Joined: Feb 2008
Posts: 4,917
Likes: 0
it also could be cavitation coming from the water pump hitting the heater core, the sound comes from the glove box

check out the mazmart upgraded water pump
Reply
Old Dec 21, 2008 | 04:44 PM
  #4  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
Originally Posted by kersh4w
does it sound like marbles in a can? or marbles in a blender?

no silly

Originally Posted by families81
It sounds like some plastic pieces are being tear apart.
Reply
Old Dec 21, 2008 | 07:37 PM
  #5  
AAChaoshand's Avatar
Rotary Powered
 
Joined: Jun 2008
Posts: 279
Likes: 0
From: Harker Heights, TX
doesn't this thread belong in the tech garage? This is general discussion is it not?
Reply
Old Dec 21, 2008 | 07:46 PM
  #6  
Quinchu's Avatar
Switcher
 
Joined: Nov 2008
Posts: 141
Likes: 0
From: Lafayette, LA
Throwing out ideas here, but have you checked the wheel-wells to see if the tire is rubbing on the plastic under there? The same thing happened in my old car, went too fast, the wind would push the plastic and it would come in contact with the tire..

Just my 2 cents! Hope thats what it is!
Reply
Old Dec 21, 2008 | 08:56 PM
  #7  
kersh4w's Avatar
Hit & Run Magnet
iTrader: (3)
 
Joined: May 2007
Posts: 6,690
Likes: 3
From: DC Area
Originally Posted by zoom44
no silly
relativity/perspective is a funny thing.

plastic tearing could sound crinkly. crinkly could sound like MIAC.
Reply
Old Dec 21, 2008 | 09:30 PM
  #8  
families81's Avatar
Thread Starter
Mars
 
Joined: Jan 2008
Posts: 49
Likes: 0
From: CA
Yes, it sounded exactly like marbles in a can/blender, and yes...im useing 91..

I doubt that it will be the wheel-wall cause there isnt any sound when im cruising on HW @80mph.

As for water pump, does 08 have that problem too?
I am planning to visit my dealer sometime next week, hopefully its not something major.
Reply
Old Dec 21, 2008 | 09:46 PM
  #9  
05rex8's Avatar
sold the 8... :(
iTrader: (7)
 
Joined: Feb 2008
Posts: 4,917
Likes: 0
Originally Posted by families81
Yes, it sounded exactly like marbles in a can/blender, and yes...im useing 91..

I doubt that it will be the wheel-wall cause there isnt any sound when im cruising on HW @80mph.

As for water pump, does 08 have that problem too?
I am planning to visit my dealer sometime next week, hopefully its not something major.
yes, the rx8 water pump is a known weak link at high RPMS

it's nothing to worry about unless you track the car and keep it in that RPM range frequently
Reply
Old Dec 21, 2008 | 09:50 PM
  #10  
chancejat's Avatar
Drive it like u stole it!
iTrader: (2)
 
Joined: Nov 2007
Posts: 1,050
Likes: 0
From: mobile, al
seems like the ol' sand in a blender/ leaf in the wind sound.....most believe it to be water cavitation....
Reply
Old Dec 22, 2008 | 01:44 AM
  #11  
Fullthrottle's Avatar
Registered User
 
Joined: Apr 2008
Posts: 40
Likes: 0
From: pittsburgh
is your windshield defrosters on when you hear the sound because ive noticed the same sound with my car but its only when the defrosters are on and the a/c compressor is engaged
Reply
Old Dec 22, 2008 | 01:58 AM
  #12  
kersh4w's Avatar
Hit & Run Magnet
iTrader: (3)
 
Joined: May 2007
Posts: 6,690
Likes: 3
From: DC Area
ahh... the marbles in a can sound is predetonation and thats not good for the engine. you need to have that checked out at the dealership. keeps going long enough you'll lose an apex seal and the engine.
Reply
Old Dec 22, 2008 | 03:04 AM
  #13  
families81's Avatar
Thread Starter
Mars
 
Joined: Jan 2008
Posts: 49
Likes: 0
From: CA
Is it because of rotary? it sounded a lot louder and more violently than predetonation I have heard on a piston engine....makes me wonder that cant be predetonation.
I already made an appointment with my dealer on Tu. hopefully I can tell you guys the problem after that.

p.s. I'll try it next time to see if there is any difference with a/c on and off
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mattymack
New Member Forum
2
Sep 6, 2015 10:33 PM
rxwilly8
New Member Forum
1
Sep 2, 2015 02:42 PM
nivong
Europe For Sale/Wanted
0
Sep 2, 2015 07:54 AM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 04:12 PM.