Rx-8 Puddle lights
#1
04 Grey
Thread Starter
Join Date: Nov 2008
Location: La Habra, Ca.
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Rx-8 Puddle lights
so do any peoples cars on here have puddle lights...was lookin up images of rx8's with puddle lights...mine dont...which do? can i put them on if i dont have em?
and anybody hook up leds to sub wen pulse?
and anybody hook up leds to sub wen pulse?
#3
04 Grey
Thread Starter
Join Date: Nov 2008
Location: La Habra, Ca.
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
than whats the deal with this page...
http://www.rx8strakes.com/index.asp?...ROD&ProdID=414
i dont understand...
http://www.rx8strakes.com/index.asp?...ROD&ProdID=414
i dont understand...
#6
ಠ_ಠ
Join Date: Aug 2007
Location: Under the Dumbarton Bridge
Posts: 2,228
Likes: 0
Received 6 Likes
on
5 Posts
Shazbot is making puddle lights out of his basement/garage. Or, he was. I got mine a while ago, but I haven't looked at the thread since. They aren't that hard to install, but you have to take the door panel and mirror off. Puddle lights are not standard equipment anywhere. Our mirrors just have the holes for them.
Last edited by Socket7; 02-10-2009 at 11:42 PM.
#7
X e p i A
iTrader: (1)
I know they are standard in Europe. There's a guy from Sweden on the forum that keeps PMing me asking how to swap out the stock bulbs with LEDs. I couldn't get it through to him for the longest time that I didn't know because we don't have them here. Anyway, I'm sure they are standard in Europe and I think they may also be standard in Australia but not positive on that.
#11
ಠ_ಠ
Join Date: Aug 2007
Location: Under the Dumbarton Bridge
Posts: 2,228
Likes: 0
Received 6 Likes
on
5 Posts
Shazbot's puddle lights thread.
https://www.rx8club.com/showthread.p...=puddle+lights
A close up of my puddle lights before installation.
I really don't think they're option equipment anywhere in the world. If they were, we could order them OEM, instead of needing shazbot to make them for us. I'm always down for someone to prove me wrong though. Derwankel also used to make a puddle light kit, but they went away before I came here. As for changing the bulbs, you have to pull the mirror out of its housing to expose the puddle light housing, and then the bulb comes out of the housing with a quarter turn of the socket, just like the bulbs in the clear corners do.
The tool is not a 7mm socket. It's standard, not metric. I didn't have a 7mm socket on me that night so I went with a 5/16ths? I forget exactly but it was close enough to get the bolt out. The socket worked much better then the screwdriver I had on me. If you look REALLY close, you can see the screw that holds the corner in place on the ground to the right of the socket wrench.
https://www.rx8club.com/showthread.p...=puddle+lights
A close up of my puddle lights before installation.
I really don't think they're option equipment anywhere in the world. If they were, we could order them OEM, instead of needing shazbot to make them for us. I'm always down for someone to prove me wrong though. Derwankel also used to make a puddle light kit, but they went away before I came here. As for changing the bulbs, you have to pull the mirror out of its housing to expose the puddle light housing, and then the bulb comes out of the housing with a quarter turn of the socket, just like the bulbs in the clear corners do.
The tool is not a 7mm socket. It's standard, not metric. I didn't have a 7mm socket on me that night so I went with a 5/16ths? I forget exactly but it was close enough to get the bolt out. The socket worked much better then the screwdriver I had on me. If you look REALLY close, you can see the screw that holds the corner in place on the ground to the right of the socket wrench.
Last edited by Socket7; 02-11-2009 at 10:33 AM.
#12
3.2 Liter Inline Sex
Dagnabbit! I thought I have solved the "Socket7" riddle...that you had cleverly placed a 7mm socket into the pic sort of like a sneaky "signature". Teehee
#14
3.2 Liter Inline Sex
#15
Administrator
iTrader: (7)
The Aussies get them standard.
I have puddle lights from Derwankle but after he got rid of his 8, Shazbot took up the cause.
I have puddle lights from Derwankle but after he got rid of his 8, Shazbot took up the cause.
#18
I zoom therefore I am.
people notice the socket on the ground but not the red dyed side marker... tsk tsk. Of course that red dye soon turned to brown, but that's another story.
#19
Registered
#20
quick question im ordering Side-Mirror Puddle Light LED Bulb Set does that come with wires and everything? do i need a switch to turn them on or do they come on automatically when i hit the unlock button my my keyless remote?
#21
My JDM 2009 RX8 Type RS has puddle lights, but I'm looking to replace them with leds. These lights actually flash downward and gives lots of visibility in dark areas. I don't know why the US models don't have them.
#22
Registered
The puddle lights were an addon I believe. There is a DIY on here on how to install your own for like $10. It is a pretty simple mod, just you have to know how to do wiring along with taking off your door panels.
All OEM side mirrors have the slot for the puddle light, you just have to put it in.
All OEM side mirrors have the slot for the puddle light, you just have to put it in.
#23
Shazbot's puddle lights thread.
https://www.rx8club.com/showthread.p...=puddle+lights
A close up of my puddle lights before installation.
I really don't think they're option equipment anywhere in the world. If they were, we could order them OEM, instead of needing shazbot to make them for us. I'm always down for someone to prove me wrong though. Derwankel also used to make a puddle light kit, but they went away before I came here. As for changing the bulbs, you have to pull the mirror out of its housing to expose the puddle light housing, and then the bulb comes out of the housing with a quarter turn of the socket, just like the bulbs in the clear corners do.
The tool is not a 7mm socket. It's standard, not metric. I didn't have a 7mm socket on me that night so I went with a 5/16ths? I forget exactly but it was close enough to get the bolt out. The socket worked much better then the screwdriver I had on me. If you look REALLY close, you can see the screw that holds the corner in place on the ground to the right of the socket wrench.
https://www.rx8club.com/showthread.p...=puddle+lights
A close up of my puddle lights before installation.
I really don't think they're option equipment anywhere in the world. If they were, we could order them OEM, instead of needing shazbot to make them for us. I'm always down for someone to prove me wrong though. Derwankel also used to make a puddle light kit, but they went away before I came here. As for changing the bulbs, you have to pull the mirror out of its housing to expose the puddle light housing, and then the bulb comes out of the housing with a quarter turn of the socket, just like the bulbs in the clear corners do.
The tool is not a 7mm socket. It's standard, not metric. I didn't have a 7mm socket on me that night so I went with a 5/16ths? I forget exactly but it was close enough to get the bolt out. The socket worked much better then the screwdriver I had on me. If you look REALLY close, you can see the screw that holds the corner in place on the ground to the right of the socket wrench.
Thread
Thread Starter
Forum
Replies
Last Post
HomicidalApple
Series I Exterior Appearance and Body Kits
16
03-09-2010 02:47 AM
wonderful-life
Series I Exterior Appearance and Body Kits
19
02-18-2009 10:17 PM
bch3779
Series I Interior, Audio, and Electronics
18
01-20-2009 01:27 PM
Rotary Rasp
Series I Exterior Appearance and Body Kits
20
03-30-2005 04:37 PM