Performance Parts...
Im looking to do something to the 8 performance wise... and im looking on doing either Exhaust or intake. i did some "research" but idk which is good and i want some advice. what should i do first, exhaust or intake? and which brand do you recommend. So please help me. :Peace:
|
|
And which to get is subjective to you. I would suggest reading some old threads in the performance section to get opionions and then hit up youtube for sound clips because that would be the most prominant feature of buying an exhaust/intake for this car. |
The exhaust will give you minimal hp increase, think about adding a midpipe and you will get some more.:) The intake will do pretty much nothing for you other than look pretty and make it sound a little better. So I guess my answer is to go w/ the exhaust first if your choice is between these two mods.
|
It's just a large air pump. Whichever end is most restrictive, do that end first. Generally speaking, you won't get more out the back if you don't put more in the front.
|
both are mostly for sound. check youtube for which one you like.
Go to the aftermarket section of this forum and search! There are tons of threads about every single type of intake and exhaust for the rx8. The data/ info is out there, find it young padawan! :lol2: |
Originally Posted by TZ250
(Post 3209276)
It's just a large air pump. Whichever end is most restrictive, do that end first. Generally speaking, you won't get more out the back if you don't put more in the front.
|
Hello BHR? I need performance mods.
|
yes the volumetric efficiency is 100% on a rotary(or very very close to 100) so generally speaking you would need to do intake and exhuast both at the same time to see any gain but the factory intake and factory exhaust are very very good so it only comes down to sound/looks mostly...personallly I'd do exhaust first...and like someone said earlier getting a midpipe will bring out a few more horses
|
simply check youtube for sound/look preference. thats the only thing a catback/intake will do. make your car sound better.
my personal favorite is the hks hi power. |
Originally Posted by 04RX8man
(Post 3209666)
yes the volumetric efficiency is 100% on a rotary(or very very close to 100) so generally speaking you would need to do intake and exhuast both at the same time to see any gain but the factory intake and factory exhaust are very very good ...
Ken |
well i was looking at an intake because thats in my price range right now. im 17 by the way.. so ill keeping looking into the exhaust and see where the wind will blow. lol
|
All times are GMT -5. The time now is 11:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands