RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   RX-8 Discussion (https://www.rx8club.com/rx-8-discussion-3/)
-   -   Need help reading dip stick for oil lol please (https://www.rx8club.com/rx-8-discussion-3/need-help-reading-dip-stick-oil-lol-please-210756/)

Lights Out 01-22-2011 11:54 AM

Need help reading dip stick for oil lol please
 
I know I know....... I have had this car for about 3 months and ever 3 fillups i check oil did not need any started riding the car harder since I put exhaust in lol now the oil is low I think I'm just having hard time reading this stupid thing. It has a line then 3 dots then another line then small flat before hitting the round part of dip stick. My question is its below the top line its between the top dot and top line. Can anyone help me on this dont want to over fill my oil

tza0001 01-22-2011 12:03 PM

Have you read your manual?

superhypered 01-22-2011 12:05 PM

i believe the dots are so you can see about where your oil is easily, my 04's dipstick has only a bottom line and a top line, and its extremely difficult to see without a flashlight to see the reflectiveness.. so the top line is the top line, you should be fine bro

Lights Out 01-22-2011 12:13 PM


Originally Posted by superhypered (Post 3856824)
i believe the dots are so you can see about where your oil is easily, my 04's dipstick has only a bottom line and a top line, and its extremely difficult to see without a flashlight to see the reflectiveness.. so the top line is the top line, you should be fine bro


Cool thanks....... So dont go above the line even though there is still little room until it hits the round part of the dip stick

Lights Out 01-22-2011 12:15 PM


Originally Posted by tza0001 (Post 3856823)
Have you read your manual?


yes I looked through it when i thought it looked low could not find shit on a pic or anything that describe it.

Mazurfer 01-22-2011 12:15 PM

1 Attachment(s)
Yeah, your reading skills are lacking..............try page 8-13.


Anyway, here's a better picture than the manual!


https://www.rx8club.com/attachment.p...9&d=1295721820

superhypered 01-22-2011 12:26 PM


Originally Posted by Lights Out (Post 3856833)
Cool thanks....... So dont go above the line even though there is still little room until it hits the round part of the dip stick

well, my car was recently by the low mark, just a lil above the low mark.. put a whole quart in and it brought it above the top line, about the same distance up from when it was low, so if you overfill a little bit, its ok, it will burn off, your engine wont explode. i think :lol2:

just DONT overfill it wayyyy too much. what happens when you do that is it gets whipped around and gets marshmellowy, and, yeah, go figure

Lights Out 01-22-2011 12:52 PM


Originally Posted by Mazurfer (Post 3856836)
Yeah, your reading skills are lacking..............try page 8-13.


Anyway, here's a better picture than the manual!


https://www.rx8club.com/attachment.p...9&d=1295721820


Damn ok thanks would you believe I did not have my reading glasses on lol

Mazurfer 01-22-2011 03:00 PM

^..................that pic is NOT in the manual but is sort of discussed on the page I referenced.

superhypered 01-22-2011 03:41 PM

out of curiousity, how come mazda put in a dipstick with only 2 marks on it like the one in my 8 in the first place? Seems pointless, but still works

ken-x8 01-22-2011 04:16 PM


Originally Posted by superhypered (Post 3856992)
out of curiousity, how come mazda put in a dipstick with only 2 marks on it like the one in my 8 in the first place? Seems pointless, but still works

Mazda, like all socially responsible organizations, constantly seeks ways to improve their products. The additional marks on the dipstick are an example of that upward striving.

Ken

superhypered 01-22-2011 05:01 PM

I see.. thanks!

REDRX3RX8 01-22-2011 05:23 PM


Originally Posted by superhypered (Post 3856992)
out of curiousity, how come mazda put in a dipstick with only 2 marks on it like the one in my 8 in the first place? Seems pointless, but still works

Two Marks! Really? I count 5 marks, and anymore might confuse you.:Eyecrazy:

Hell, I never could read it with 5w20, but I can with a normal weight of 0w40.

superhypered 01-22-2011 05:28 PM


Originally Posted by REDRX3RX8 (Post 3857058)
Two Marks! Really? I count 5 marks, and anymore might confuse you.:Eyecrazy:

Hell, I never could read it with 5w20, but I can with a normal weight of 0w40.

if you're flaming, i'll take a pic for you shortly, just for you :)

REDRX3RX8 01-22-2011 05:38 PM

Oh excuse me, mea culpa, I know about running changes in Japanese cars, but I didn't know that some cars didn't have those three titty marks!:bowdown:

Mazurfer 01-22-2011 06:10 PM

^......think early models might only have two?
Not sure though!
Anybody with an early 04 confirm?

superhypered 01-22-2011 06:20 PM

i can............. pics coming up after this.......

tza0001 01-22-2011 06:25 PM


Originally Posted by Mazurfer (Post 3857087)
^......think early models might only have two?
Not sure though!
Anybody with an early 04 confirm?

You are correct (as usual:)) I have an 04 model and the dipstick has only two marks (one for low one for full).

Mazurfer 01-22-2011 06:25 PM

This is actually getting funny and interesting...............I'll tell you why.

Early on(in early 06), I was poking around on the Finishline site and saw this dipstick(see link below).
Thinking it was "new" and I was ordering other stuff, I threw it in with my order.
Well, as it turns out, it's not like the pic at all and is exactly like ours is now, but maybe the difference was that it had the tits where my old one didn't?
I can't verify my old one as someone needed it and I sent it to them for free. Think it's in Arizona somewhere. :)

Note the part number has a "D' revision...............this doesn't mean it started at "A", but maybe there was an older version?

http://www.finishlineperformance.com...2&cat=0&page=1

superhypered 01-22-2011 06:27 PM

Step 1: Admire the view

http://sphotos.ak.fbcdn.net/hphotos-..._4429011_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-...64_61271_n.jpg

Step 2: Show it off

http://sphotos.ak.fbcdn.net/hphotos-..._3225370_n.jpg

Step 3: Locate your dipstick

http://sphotos.ak.fbcdn.net/hphotos-..._5691343_n.jpg

Step 4: Prove you mofo wrong :lol2:

http://sphotos.ak.fbcdn.net/hphotos-..._7144410_n.jpg

you're welcome

p.s. i didnt do the dent..

Mazurfer 01-22-2011 06:28 PM

Nice ride, ugly dent! :Freak_ani

Get that fixed! :Peace:

superhypered 01-22-2011 06:31 PM


Originally Posted by Mazurfer (Post 3857106)
Nice ride, ugly dent! :Freak_ani

Get that fixed! :Peace:

dent too expensive

fender too expensive

$400 = not even matching shade wtf (paint only)

its a beauty mark :)

and i poor :tear:

jasonrxeight 01-22-2011 06:33 PM

whoever designed that oil filter and dipstick location is an idiot.

superhypered 01-22-2011 06:34 PM

its in your car too?... or is that different for the R3s? nice R3 btw

Mazurfer 01-22-2011 06:42 PM


Originally Posted by jasonrxeight (Post 3857110)
whoever designed that oil filter and dipstick location is an idiot.

Buy the relocation kit then...............but...uh....yeah........I agree! :wallbash:


All times are GMT -5. The time now is 11:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands