Mazdaspeed RX-8 at the 2006 Tokyo Auto Salon
#76
Because I can't read japanese can anyone tell me what they are saying about the new wheels??? Those center caps will look damn nice and factory rx8 wheels..
Also... they are available in 17x7 for the wifes car...
Also... they are available in 17x7 for the wifes car...
#77
Administrator
The aluminum wheel (Matsuda speed) it sells
With the cooperation development with "the エンケイ" corporation, high intensity, high rigidity, achieving light weight conversion in the higher-order origin
Matsuda speed sells RX-8 and the new model roadster, the aluminum wheel for アテンザ (Matsuda speed), マツダグル of entire country - via the プ dealership and the Matsuda speed commodity dealer.
The aluminum wheel which this each time is sold (Matsuda speed), with the Matsuda speed original design which the Matsuda car designer supervised, スポーティ which extends the spoke to the rim it has become design. In addition, the particular wheel is the wheel supplier of F1, although being casting with the joint development commodity "of the エンケイ" corporation, MAT process (* 1) with adoption, the forging common strength which is superior it achieves high rigidity in the higher-order origin.
MAZDASPEED logograph, the Matsuda symbol mark enters into the center cap in the spoke part, the color is setting only of the dark sill bar.
The product of Matsuda speed is the guarantee attachment 1 years.(However, you exclude one for competition)
* 1: MAT (Most Advanced Technology) process
Being something which applies the rim formation methodological 「 spinning manufacturing method 」 of the forging wheel and 2 piece /3 piece wheels to the manufacturing method of the casting 1 piece wheel, modelling characteristic height low only of the casting in cost characteristic, the forging common strength which is superior it unites high rigidity, "エンケイ" corporation individual new technology
With the cooperation development with "the エンケイ" corporation, high intensity, high rigidity, achieving light weight conversion in the higher-order origin
Matsuda speed sells RX-8 and the new model roadster, the aluminum wheel for アテンザ (Matsuda speed), マツダグル of entire country - via the プ dealership and the Matsuda speed commodity dealer.
The aluminum wheel which this each time is sold (Matsuda speed), with the Matsuda speed original design which the Matsuda car designer supervised, スポーティ which extends the spoke to the rim it has become design. In addition, the particular wheel is the wheel supplier of F1, although being casting with the joint development commodity "of the エンケイ" corporation, MAT process (* 1) with adoption, the forging common strength which is superior it achieves high rigidity in the higher-order origin.
MAZDASPEED logograph, the Matsuda symbol mark enters into the center cap in the spoke part, the color is setting only of the dark sill bar.
The product of Matsuda speed is the guarantee attachment 1 years.(However, you exclude one for competition)
* 1: MAT (Most Advanced Technology) process
Being something which applies the rim formation methodological 「 spinning manufacturing method 」 of the forging wheel and 2 piece /3 piece wheels to the manufacturing method of the casting 1 piece wheel, modelling characteristic height low only of the casting in cost characteristic, the forging common strength which is superior it unites high rigidity, "エンケイ" corporation individual new technology
#78
Rotary eXperimental-8
Join Date: Nov 2003
Location: Gander, Newfoundland, Canada
Posts: 1,830
Likes: 0
Received 0 Likes
on
0 Posts
We are all well aware that RE Amemiya is looked up as a God in the rotary tuning world, but why do I get the feeling that their exhaust looks heavy as well as the extra piping seem counterproductive for adding horsepower? Surely, that funky man knows a thing or two about what he is doing. Could this exhaust yield that much power that it would justify for it's design?
#79
The 8th Deadly Sin
Join Date: Jan 2005
Location: Root Creek
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by moRotorMotor
We are all well aware that RE Amemiya is looked up as a God in the rotary tuning world, but why do I get the feeling that their exhaust looks heavy as well as the extra piping seem counterproductive for adding horsepower? Surely, that funky man knows a thing or two about what he is doing. Could this exhaust yield that much power that it would justify for it's design?
#82
Int'l Man of Mystery
Join Date: Jan 2004
Location: Central Florida
Posts: 3,651
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zoom44
The aluminum wheel (Matsuda speed) it sells
With the cooperation development with "the エンケイ" corporation, high intensity, high rigidity, achieving light weight conversion in the higher-order origin
Matsuda speed sells RX-8 and the new model roadster, the aluminum wheel for アテンザ (Matsuda speed), マツダグル of entire country - via the プ dealership and the Matsuda speed commodity dealer.
The aluminum wheel which this each time is sold (Matsuda speed), with the Matsuda speed original design which the Matsuda car designer supervised, スポーティ which extends the spoke to the rim it has become design. In addition, the particular wheel is the wheel supplier of F1, although being casting with the joint development commodity "of the エンケイ" corporation, MAT process (* 1) with adoption, the forging common strength which is superior it achieves high rigidity in the higher-order origin.
MAZDASPEED logograph, the Matsuda symbol mark enters into the center cap in the spoke part, the color is setting only of the dark sill bar.
The product of Matsuda speed is the guarantee attachment 1 years.(However, you exclude one for competition)
* 1: MAT (Most Advanced Technology) process
Being something which applies the rim formation methodological 「 spinning manufacturing method 」 of the forging wheel and 2 piece /3 piece wheels to the manufacturing method of the casting 1 piece wheel, modelling characteristic height low only of the casting in cost characteristic, the forging common strength which is superior it unites high rigidity, "エンケイ" corporation individual new technology
With the cooperation development with "the エンケイ" corporation, high intensity, high rigidity, achieving light weight conversion in the higher-order origin
Matsuda speed sells RX-8 and the new model roadster, the aluminum wheel for アテンザ (Matsuda speed), マツダグル of entire country - via the プ dealership and the Matsuda speed commodity dealer.
The aluminum wheel which this each time is sold (Matsuda speed), with the Matsuda speed original design which the Matsuda car designer supervised, スポーティ which extends the spoke to the rim it has become design. In addition, the particular wheel is the wheel supplier of F1, although being casting with the joint development commodity "of the エンケイ" corporation, MAT process (* 1) with adoption, the forging common strength which is superior it achieves high rigidity in the higher-order origin.
MAZDASPEED logograph, the Matsuda symbol mark enters into the center cap in the spoke part, the color is setting only of the dark sill bar.
The product of Matsuda speed is the guarantee attachment 1 years.(However, you exclude one for competition)
* 1: MAT (Most Advanced Technology) process
Being something which applies the rim formation methodological 「 spinning manufacturing method 」 of the forging wheel and 2 piece /3 piece wheels to the manufacturing method of the casting 1 piece wheel, modelling characteristic height low only of the casting in cost characteristic, the forging common strength which is superior it unites high rigidity, "エンケイ" corporation individual new technology
#83
Int'l Man of Mystery
Join Date: Jan 2004
Location: Central Florida
Posts: 3,651
Likes: 0
Received 0 Likes
on
0 Posts
Aluminum Wheels On Sale
Developed in partnership with "Enkei", achievement of higher dimension through high strength, high ridigity, light weight
Mazdaspeed will sell the aluminum wheel for RX-8, new Roadster [MX-5], and Atenza, through nationwide Mazda Group Sales Co. and Mazdaspeed Parts Sales Outlets.
Mazdaspeed products come with a 1 year warranty.
18" 18 x 8 +50 47,250 Yen w/ tax (45,000 Yen)
-RX-8
17" 17 x 7 +55 42,000 Yen w/tax (40,000 Yen)
-New Roadster [MX-5]
-Atenza Sports (23Z excluded)
-Atenza Wagon (23Z exlcuded)
-Atenza Sedan (not included the Mazdaspeed Atenza)
Developed in partnership with "Enkei", achievement of higher dimension through high strength, high ridigity, light weight
Mazdaspeed will sell the aluminum wheel for RX-8, new Roadster [MX-5], and Atenza, through nationwide Mazda Group Sales Co. and Mazdaspeed Parts Sales Outlets.
Mazdaspeed products come with a 1 year warranty.
18" 18 x 8 +50 47,250 Yen w/ tax (45,000 Yen)
-RX-8
17" 17 x 7 +55 42,000 Yen w/tax (40,000 Yen)
-New Roadster [MX-5]
-Atenza Sports (23Z excluded)
-Atenza Wagon (23Z exlcuded)
-Atenza Sedan (not included the Mazdaspeed Atenza)
Last edited by Japan8; 01-28-2006 at 07:43 AM.
#84
Int'l Man of Mystery
Join Date: Jan 2004
Location: Central Florida
Posts: 3,651
Likes: 0
Received 0 Likes
on
0 Posts
This is an intersting development. One mag I read said that Mazda is considering releasing a fully setup car of these 3 MS concepts. Another mag mentioned a larger intercooler and turbo on the MS Concept...
#86
The 8th Deadly Sin
Join Date: Jan 2005
Location: Root Creek
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Japan8
Aluminum Wheels On Sale
Developed in partnership with "Enkei", achievement of higher dimension through high strength, high ridigity, light weight
Mazdaspeed will sell the aluminum wheel for RX-8, new Roadster [MX-5], and Atenza, through nationwide Mazda Group Sales Co. and Mazdaspeed Parts Sales Outlets.
Mazdaspeed products come with a 1 year warranty.
18" 18 x 8 +50 47,250 Yen w/ tax (45,000 Yen?
-RX-8
17" 17 x 7 +55 42,000 Yen w/tax ?40,000 Yen?
-New Roadster [MX-5]
-Atenza Sports (23Z excluded)
-Atenza Wagon (23Z exlcuded)
-Atenza Sedan (not included the Mazdaspeed Atenza)
Developed in partnership with "Enkei", achievement of higher dimension through high strength, high ridigity, light weight
Mazdaspeed will sell the aluminum wheel for RX-8, new Roadster [MX-5], and Atenza, through nationwide Mazda Group Sales Co. and Mazdaspeed Parts Sales Outlets.
Mazdaspeed products come with a 1 year warranty.
18" 18 x 8 +50 47,250 Yen w/ tax (45,000 Yen?
-RX-8
17" 17 x 7 +55 42,000 Yen w/tax ?40,000 Yen?
-New Roadster [MX-5]
-Atenza Sports (23Z excluded)
-Atenza Wagon (23Z exlcuded)
-Atenza Sedan (not included the Mazdaspeed Atenza)
#92
Originally Posted by Japan8
Aluminum Wheels On Sale
Developed in partnership with "Enkei", achievement of higher dimension through high strength, high ridigity, light weight
Mazdaspeed will sell the aluminum wheel for RX-8, new Roadster [MX-5], and Atenza, through nationwide Mazda Group Sales Co. and Mazdaspeed Parts Sales Outlets.
Mazdaspeed products come with a 1 year warranty.
18" 18 x 8 +50 47,250 Yen w/ tax (45,000 Yen)
-RX-8
17" 17 x 7 +55 42,000 Yen w/tax (40,000 Yen)
-New Roadster [MX-5]
-Atenza Sports (23Z excluded)
-Atenza Wagon (23Z exlcuded)
-Atenza Sedan (not included the Mazdaspeed Atenza)
Developed in partnership with "Enkei", achievement of higher dimension through high strength, high ridigity, light weight
Mazdaspeed will sell the aluminum wheel for RX-8, new Roadster [MX-5], and Atenza, through nationwide Mazda Group Sales Co. and Mazdaspeed Parts Sales Outlets.
Mazdaspeed products come with a 1 year warranty.
18" 18 x 8 +50 47,250 Yen w/ tax (45,000 Yen)
-RX-8
17" 17 x 7 +55 42,000 Yen w/tax (40,000 Yen)
-New Roadster [MX-5]
-Atenza Sports (23Z excluded)
-Atenza Wagon (23Z exlcuded)
-Atenza Sedan (not included the Mazdaspeed Atenza)
Any other company making the same style as the new Mazdaspeed rim? Does the split 5 spoke Mazdaspeed rim work with TPMS?
I know ADR Kasai and Flik Lex has same style, don't know about their quality, but another companies that make the same style?
Thanks.
#93
I AM SUPER MAN
Join Date: Jul 2003
Location: FAIR LAWN, NJ
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
for some reason knowing the auto industry i think that the US version of the mazda speed 2 rx-8 is going to be super charge. when ever if ever comes to the us, and i think they going to wait till the new 2008 nissan gtr super car comes out. other wise they will loose lots of rotary fans including ME.
Evil
Evil
Thread
Thread Starter
Forum
Replies
Last Post
vetteor8
New Member Forum
3
08-09-2015 05:56 PM