RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   RX-8 Discussion (https://www.rx8club.com/rx-8-discussion-3/)
-   -   Any have a nice License plate frame? (https://www.rx8club.com/rx-8-discussion-3/any-have-nice-license-plate-frame-127613/)

416to212 09-26-2007 03:03 PM

Any have a nice License plate frame?
 
So I'm getting a bit sick of advertising for my dealership with the license plate frames they graciously stuck on my plates.

Does anyone have any nice license plate frames on their rides? How much do you guys shell out for plate frames?

BTW I had lightly smoked black plate covers but I was hassled by NYC cops too often (midtown tunnel and Norther Blvd). I need to go with a frame....

Jax_RX8 09-26-2007 03:21 PM

Try here - they have several very good frames and clear covers.

http://www.weathertech.com/

c0ldf1ame 09-26-2007 04:51 PM

i roll with no frames, cleanest way IMO, unless maybe just a black frame

champi0n 09-26-2007 05:49 PM

frames on licenceplates are like frames for internet... DONT DO IT

people that get licence plate frames are the same that get Taz floor mats and winnie the poo seat covers :(

reaper1 09-26-2007 05:55 PM

I take the frame off and use the smoked covers. I have no idea why cops hassel you about that , thats BS. Things must be slow around there. I've never had a problem in that regard. I can't stand when they put there frames on ,we should get pay for it.

Thats called advertising......

Jethro Tull 09-26-2007 05:58 PM

I went with the Mazda chrome plate frame, that has "RX-8" etched into it. It looks very good on the rear of my silver 8. Matches the rear rotary accent and chrome exhaust tips. I don't have a front plate.

BTW, I just ordered the Mazda "all weather" floor mats, and my Pooh bear seat covers are at the dry cleaners right now, so there!

SoundDsnr23 09-27-2007 09:31 AM

Take a look on Ebay. I found a few different stores on there that sell various frames with RX-8 and Mazda etched into them. There was a black metal frame that I thought might look good on my copper red. I'll put it on my Christmas list this year ;)

coastie08 09-27-2007 09:37 AM

I have a plain gloss black plastic frame (thin style).

jskup1 09-27-2007 10:42 AM

Authentic mazdaspeed. $38http://www.trademotion.com/partlocat...subcat2=121702

Huey52 09-28-2007 03:02 PM

This is the one I have ;)

http://www.marineheritage.org/Store_...=9&SortOrder=1

http://www.marineheritage.org/Store_...=9&SortOrder=1

Decat 09-28-2007 03:08 PM

While on the subject how many people have gotten tickets for not having a plate on the front? Here in TX it is a $90 fine. I got hit with it a few years back. Anyone else have any experiences?

champi0n 09-28-2007 03:15 PM

only need a back plate here, front plates are stoopid.. we had front/back plates at one point but it was put down to 1 only.

Smoke Honda 09-28-2007 03:24 PM


Originally Posted by Decat (Post 2074842)
While on the subject how many people have gotten tickets for not having a plate on the front? Here in TX it is a $90 fine. I got hit with it a few years back. Anyone else have any experiences?

75 bucks, tiwce. Once for not having one. Once for not having it properly displayed, it was on the dash.

AJ's Shinka 09-28-2007 07:26 PM

+1 no frames. Keep it clean.

perks11 09-28-2007 07:41 PM

i just have your typical chrome frame, not to much money, i actually got mine for free. as for the ticket for not having a front plate...i haven't gotten a ticket but have gotten two warnings. i think the ticket in MO is like $60

RWagz 09-28-2007 07:56 PM

I ditched both the dealer transfer sticker and plate holder about 100m from the dealership on my ~1k mile trip home after buying my 8.

3 months later, after finally getting my plates, I am pretty sure I'm going to leave them naked with no frames, looks pretty good on the 8. Definitely wish I didn't have to display a front plate. At some point I'm pretty sure I'll relocate the front plate (per a DIY here, lower and to one side).

BigRed 09-28-2007 10:13 PM

My personal plate is a small scion/toyota gloss black thin frame. I then took blue krylon and painted it. Then gave it a clear of krylon clear. Looks very clean and similar to the wb.

ken-x8 09-28-2007 10:14 PM

I bought some black door edge guard and wrapped it around the edge of the plate. Needed to use both pieces on each plate. Cut the length to cover half the circumference, with the breaks at the top center and bottom center.

Ken

ac3mastuh 09-29-2007 01:15 AM

i simply use a smoked cover with a gloss black frame, simple and looks great

ScottyStyles 09-29-2007 01:18 AM

http://www.cafepress.com/rotaryshop.44400156

RX8Maine 09-29-2007 07:17 AM


Originally Posted by champi0n (Post 2074856)
...front plates are stoopid...

I agree. I took mine off this summer, and got 1 warning. I have no idea what the ticket would cost.

Spinning Sushi 09-29-2007 07:40 AM

1 Attachment(s)
My frame says RX-8 on it.

https://www.rx8club.com/attachment.p...1&d=1191069597

ac3mastuh 09-29-2007 09:43 AM

front plates FTL!

jeffe19007 09-29-2007 10:43 AM

I have a cheap black thin black frame with a smoked cover. The dealership frame lasted until I got home and was gone. I used adhesive loop (of velcro fame) on the back of the plate to stop any rattling or scratching of the bumper.

I checked into the Arizona laws after some fellow 8 owners hassled me, and all it says is it must be clearly legible. So the smoked cover stays. Lord knows I have been closely followed by the police a few times.

Arizona was going to pursue a front plate policy, until someone figured out they would need to issue front plates to all vehicles in Az! Spending that much money (to basically allow red light and speed enforcement automation an easier job) is a no no is a tight wad state like Az.

anet1737 09-29-2007 10:49 AM

the clear covers from target work good enough for me. you just have to make sure you take it off n clean it once in a while. i had the smoked one and a motorcycle cop came up next to me and told me i needed to change it cuz his blind ass couldn't read my plate....=P damn pig! oh well.


All times are GMT -5. The time now is 11:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands