RX-8 Carbon-Fiber Charger air intake
i noticed you are selling this Simota air intake. is there anyone on the forum that has bought this that can give an opinion on it? Or maybe my search did not pull up a thread right.
Looks interesting and easier to change/clean the filter than a CAI. |
Also search Mishimoto Intake.
I have one and it sounds awesome. Might be too loud for some. Check this vid... http://www.youtube.com/watch?v=YxOHy_Pth3A |
When they first introduced the intake it had many problems.
|
the intake i am referring to is not the mishimoto one that is wide and open at the input at the front.
I found it on ebay for sale by RX8strakes. here is the Item number: 290296886164 New Simota® Racing Sports carbon-fiber charger air intake system. Includes hardware and instructions. |
I read alot of the searche ones about the Mishimoto CF intake. not a good start
|
Hello,
We have purchased and sold a limited number of the Simota Charger Intakes so far. We have had positive feedback, including a few people who've mentioned seeing an increase in horse power. Pictures of the Carbon-Fiber Charger Air Intake System http://www.rx8strakes.com/ebay_produ...n_charger1.jpg http://www.rx8strakes.com/ebay_produ...n_charger2.jpg Hope that helps! |
COPY OF POST REPLY UNDER THE INTAKES, INTAKES, INTAKES:
2 years ago,I had the K & N short ram intake (1st gen) on my car, took it off after 6 months because of heat in the engine bay, imo makes it lose performance, esp in the summer, went back to the stock intake with drop in K&N intake. Until today! This thing is awesome, great sound, great throttle response, does remind me of the short ram intake, however, not as loud. it has a small horn on the front of the intake, of which i am going to duct throuh my front with a flex duct kit. But for now will run it as is. it was an easy install. all the parts necessary in the box. CF matched my hood and other CF parts. no complaints as of yet, no CEL. Drove around for an hour or so, playing dropping it from 3rd to 2nd at around 4500 rpm, the jump to 8k gives a growl and a throaty roar from under the hood as well as through my RB exhaust. Thank you Dave, Heather from RX8strakes, I appreciate the quick shipment. will post pics as soon as i convert to smaller images and upload. the next thing i am definitely interested in are the CF side vents you have. the new style ones. hope to be able to order some of those soon. btw, you are correct, all the parts are included in the kit. I was also very impressed with the quality of the product and how it was built. the aluminum welds looked nice, and all the parts fit perfectly, especially the MAFS mount, it was machined to an exact fit as the oem mount. one thing I did change was the rubber liner for the bracket. it was blue and did not match my color scheme under the hood. I changed it to black. |
power gain
did u ever find out how many hp ur rx8 gained after instaling this intake? do u still have it? i'm thinking of gettinng intake to my rx8 but i don't know which one would be the best buy
|
im sorry but djcharlee, what is the flying monkey mod??? lol
|
ive been looking into getting an intake, but rx8strakes.com only has 1 intake listed. Do yall have others unlisted? or just stock the REVi intake because its the best lol
|
Originally Posted by jeffRX
(Post 3139744)
im sorry but djcharlee, what is the flying monkey mod??? lol
Charlee |
All of the Simota intakes I have seen have the big carbon fiber box. Anyone scene one of these?
http://cgi.ebay.com/ebaymotors/ws/eB...category=38634 |
The Round Simota is pretty hot.
|
Normally the factory RX8 engine cover latches on to the stock intake box. I take it the engine cover cannot be used with the Simota CF intake? Or can it still be used?
|
Originally Posted by sandnsun7
(Post 2902053)
i noticed you are selling this Simota air intake. is there anyone on the forum that has bought this that can give an opinion on it? Or maybe my search did not pull up a thread right.
Looks interesting and easier to change/clean the filter than a CAI. |
Originally Posted by djcharlee
(Post 2902667)
Also search Mishimoto Intake.
I have one and it sounds awesome. Might be too loud for some. Check this vid... http://www.youtube.com/watch?v=YxOHy_Pth3A can it go on to an AT? |
I have the round short ram intake version of this. its loud but it's a good sound. It did free up my engine bay and improve breathing(airflow) of the car and have notice better acceleration and low rpm's where it was really needed. so yeah, it does its job as and intake and looks great too.
|
Are these available for 2009 model?
|
Originally Posted by RandallzRx8
(Post 3656348)
Are these available for 2009 model?
|
available for A/T?
|
Originally Posted by S.Man.Rx8
(Post 3676677)
available for A/T?
|
and they are $183.99 shipped from RotaryFX on their Ebay
|
I have 2006 mazda rx8, i also want to put an air intake
but i dont know all the differences like short ram, and cold air all that??? i drive like 30 miles a day so i dont want my car to brake so what do you guys recommend |
What's the difference between: a) Carbon-Fiber Charger Air Intake System - $159 and b) Carbon-Fiber Aero Form Air Intake System - $269?
thanks |
Just ordered my Carbon intake and it should be here by friday!!I'll try to put up a post, possibly with a b4 and after video, but my luck with posting pics on here hasnt been good, so we'll see about the video. O ordered the intake with the carbon funnel, just for reference.
|
Found it on the manufacturers web site purchased and will let you guys know how it goes. Gotta say that the 300 price range is kinda crazy but love the sound.
Originally Posted by djcharlee
(Post 2902667)
Also search Mishimoto Intake.
I have one and it sounds awesome. Might be too loud for some. Check this vid... http://www.youtube.com/watch?v=YxOHy_Pth3A |
Its pretty easy to find on rotaryfx's web site, but looks like ya paid around the same. mine was 285 shipped from them. installing tomorrow if the weather cooperates. super stoked bout the sound of it too, cant wait to get it on.
|
Yea but I was trying to find the one thats in the video that was posted....my bad guys.
Originally Posted by DBSHINKA8
(Post 3904611)
Its pretty easy to find on rotaryfx's web site, but looks like ya paid around the same. mine was 285 shipped from them. installing tomorrow if the weather cooperates. super stoked bout the sound of it too, cant wait to get it on.
|
Originally Posted by RxCarter
(Post 3904960)
Yea mine was 327 shipped heres the one i got ...
How does it sound/perform? |
Originally Posted by larkin
(Post 3904978)
Probably best to keep links to other vendors off of this vendor's own forum.
How does it sound/perform? |
wasn't this the one in the vid?
http://www.rotaryfx.com/product_p/per1047.htm |
No its not the one in the vid is bigger and the air filter is also much bigger as well. The one in the vid is a umnitza. Thats why it says umnitza simota cf intake.
|
Originally Posted by RxCarter
(Post 3905091)
No its not the one in the vid is bigger and the air filter is also much bigger as well. The one in the vid is a umnitza. Thats why it says umnitza simota cf intake.
|
I know of several people that own this intake for the Mazda 3. Most of them end up ripping it out within a few months and putting back their AEM. Other than the noise and the CF look, it's really not good for much.
|
^^ what about the funnel version; any reason to think that might be better?
Also, not really fair to compare a regular intake with a CAI. |
Originally Posted by larkin
(Post 3905427)
^^ what about the funnel version; any reason to think that might be better?
Also, not really fair to compare a regular intake with a CAI. |
Originally Posted by DBSHINKA8
(Post 3905222)
yes the one that rotaryfx sells is the same as the video. their picture on the website does not do it justice, the thing is huge!! anywho, enjoy!
|
^^^ OK ^^^ YOU WIN!! I bowdown to your infinite wisdom of cold air induction :bowdown: When you posted the other day the pics of the UMNITZA wouldnt even load on their site, but anywho, i dont give a shyt if the one i got isnt the UMNITZA it still sounds wicked.
|
HAHA yeah as long as I see a little power gain im fine because the sound i amazing:yumyum:.
Originally Posted by DBSHINKA8
(Post 3906681)
^^^ OK ^^^ YOU WIN!! I bowdown to your infinite wisdom of cold air induction :bowdown: When you posted the other day the pics of the UMNITZA wouldnt even load on their site, but anywho, i dont give a shyt if the one i got isnt the UMNITZA it still sounds wicked.
|
Originally Posted by RxCarter
(Post 3906809)
HAHA yeah as long as I see a little power gain im fine because the sound i amazing:yumyum:.
|
Originally Posted by DBSHINKA8
(Post 3907142)
You should feel a power gain. I had mine out today after i put it in and noticed a substantial difference at lower rpm's and man does this thing growl as you hit 4500 and continues till redline!!!
OOOOOH I cant wait :bluesuit: |
The one I have is the Mishimoto, but it sounds exactly the same. You will love it. Some motorcycles do a double take, they think its a bike when it gets up and past 7500 Rpm
|
Originally Posted by djcharlee
(Post 3907673)
The one I have is the Mishimoto, but it sounds exactly the same. You will love it. Some motorcycles do a double take, they think its a bike when it gets up and past 7500 Rpm
|
^^ link not working. maybe privacy settings
|
Heres a quick vid of my Simota intake. I am going to try to get a better vid once the weather is nicer, but this will give ya an idea of what it sounds like just tapping the throttle a bit.
http://www.youtube.com/watch?v=0FVovRJDH5o |
Sounds like a beast. How does it sound inside the car while driving?
|
Originally Posted by larkin
(Post 3910286)
Sounds like a beast. How does it sound inside the car while driving?
|
Originally Posted by DBSHINKA8
(Post 3910750)
Sounds mean! Especially up around 6-8K. I am totally pleased with the performance and the sound. Ive had short rams and cold airs on other cars ive owned but none even come close to the aggressiveness of this one. Definitely recommend this if you are considering an aftermarket intake system.
|
Originally Posted by RxCarter
(Post 3915757)
Ok so I got mine in and my car is a 2004. Where you have that one long bracket that you can see in your video I can not find a single place in my engine bay around the intake to even mount that bracket to it. On top of that the paper work that came with mine says 08+ So does that mean the one I got is not for my 04 and if so whats the dang difference lol?
That bracket goes underneath the clamp that secures your stainless intake tube to the factory flex tube. I havent gotten mine adjusted just right yet. As you prob know it is just a mount for the engine cover, but if you're like me you want your engine cover back on. If not just disregard that bracket, that's all it's for. im no expert but i dont believe anything was changed in the rx8 yet since coming into production besides asthetics. Even so, mine is an 05, n i know they didnt change anything from 04 to 05. Hope this helps. |
^^^Oh, btw!! You may want to add some kind of rubber bushing to the mounting clamps to absorb some of the vibration. I toojk mine off to have some service work done and noticed some "spiderwebbing" in the gel coat over the carbon on the bottom side of the funnel housing. "BUMMER" So when i remounted it yesterday i added a bushing to each side and bought longer bolts to reach the factory mounts. I am going to buy a sheet of "Di-Noc" to cover the bottom to prevent it from spreading around the sides or to the top.
|
All times are GMT -5. The time now is 05:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands