Product Development Ideas for RX8strakes.com
#51
Registered
Join Date: Jan 2005
Location: San Diego, CA
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Those have already been produced. You can buy them here:
http://evo-r.net/product/RX-8/index.htm
http://evo-r.net/product/RX-8/index.htm
Ah ok, but only CF, they dont have the piano black, one in piano black would be sweet, they have one at japanparts but only for japanese cars (left hand). thanks for the link.
i agree with the other guys, piano black ashtray would be really nice too.
#52
Registered
Join Date: Jan 2005
Location: San Diego, CA
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
i looked at the link a little closer and the shift gate panel on that site is just a stick on over the existing one, it would be a whole lot better if it was a complete replacement instead of paying 89 bucks for a stick on.
#57
SR Dubbed Rx8
Join Date: Aug 2007
Location: Jacksonville FL.
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
#58
2004 Silver RX-8 Sport MT
Join Date: Dec 2007
Location: Seattle
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Bring back the rear rotary light, but make it LED
Bring back the fuel cap holder
Change the Speed Racer vinyl so that the "M" on his helmet is the Mazda logo (then it's "M" Speed! for Mazdaspeed)
Make the Decepticon vinyl available in purple
Under-hood flashlight and mounted holder, nicely designed with useless wankels (for roadside repairs)
Change misleading description of your "Interior LED light set" because it doesn't have front dome lights
Front LED Headlight set with load resistors (no need to replace the high and low beams, just signals/running lights)
Nicer and cheaper oil caps
Bigger selection of sizes for rotary-style vinyls
More rotary vinyl designs and rotary-related designs
Aluminum Footrests
Knee & Arm Pads
Blank stereo deadbuttons to replace buttons I have that do nothing (minidisc, hello?)
Mazdaspeed Wheel Center Caps
Wheel Center Caps that match some more of your cool rotary vinyls
Bring back the fuel cap holder
Change the Speed Racer vinyl so that the "M" on his helmet is the Mazda logo (then it's "M" Speed! for Mazdaspeed)
Make the Decepticon vinyl available in purple
Under-hood flashlight and mounted holder, nicely designed with useless wankels (for roadside repairs)
Change misleading description of your "Interior LED light set" because it doesn't have front dome lights
Front LED Headlight set with load resistors (no need to replace the high and low beams, just signals/running lights)
Nicer and cheaper oil caps
Bigger selection of sizes for rotary-style vinyls
More rotary vinyl designs and rotary-related designs
Aluminum Footrests
Knee & Arm Pads
Blank stereo deadbuttons to replace buttons I have that do nothing (minidisc, hello?)
Mazdaspeed Wheel Center Caps
Wheel Center Caps that match some more of your cool rotary vinyls
#61
Fog light strakes
Fog light strakes, fog light strakes! So many people want these so why not make them? I think they would look great, we should push for this item. Can't be any harder to make then the one's on the side for the fenders.
#62
Former Sponsor
Thread Starter
Join Date: Mar 2008
Location: Rancho Cordova, CA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Design
Rapid prototypes
Right now, the mold is in development...
#64
#67
I zoom therefore I am.
a mount for radar detectors that mounts next to the rear view mirror but the bracket runs up into the headliner and doesnt just get stuck on the glass.
#69
Former Sponsor
Thread Starter
Join Date: Mar 2008
Location: Rancho Cordova, CA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
We expect samples of the foglight strakes at the end of this month and production should take another few months. We'll definitely let you know when they're available.
#70
I have a suggestion for improving one of your products. For the cooler screens, you should include a piece of weatherstripping for the jagged cut edges for those with foglights. Looks a ton better and will also hide any cutting mistakes. See pic:
Last edited by 05rex8; 07-01-2008 at 09:28 PM.
#71
Hi, here's a couple from me -
1) yes please bring back the rear rotary stealth light. will it be possible for it to have a dual white/red light feature for reversing/braking. also, it would be great if it could be fit with the rotary crest i got from rx8strakes.
2) door sill plate kit with led illuminated 'rx-8' text or rotary motif.
3) dunno if this is illegal anywhere but i thought it's worth a try - front rotary fog light?!
4)+ 1 for the rotary exhaust tips.
5)+ 1 for twin fog light strakes (paint matched too)
1) yes please bring back the rear rotary stealth light. will it be possible for it to have a dual white/red light feature for reversing/braking. also, it would be great if it could be fit with the rotary crest i got from rx8strakes.
2) door sill plate kit with led illuminated 'rx-8' text or rotary motif.
3) dunno if this is illegal anywhere but i thought it's worth a try - front rotary fog light?!
4)+ 1 for the rotary exhaust tips.
5)+ 1 for twin fog light strakes (paint matched too)
#72
Registered
iTrader: (1)
Join Date: Jul 2008
Location: Bethlehem, CT
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
how about strakes in the fog light vents in front of the oil coolers?? i saw that i think on rx8strakes.com or rotary13b1.com and i can't find them again, i thought they looked mean, also if you have any canards that fit the oem bumpers for the front and rear it would be nice.
#74
Registered
Join Date: Mar 2007
Location: private area in south florida
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
something ive always wanted...Blacked out emblems.
id really like a set of high quality black emblems, for the M, Mazda, and RX-8, preferably a blackish/chrome look...should be easy enough guys.
oh and a full led tail light replacement would be nice preferably something similar to the 2009 rx8 with 2 led rings
"Smoked Clear Coners" basicly a set of clear corners but with a smoked tint to it, or maybe completely clear with a black trimming inside the reflectors.
variety of shift *****, preferably unique and customized to suit the rx8
different color interior bulbs, (id like some purple/violet ones lol)
id really like a set of high quality black emblems, for the M, Mazda, and RX-8, preferably a blackish/chrome look...should be easy enough guys.
oh and a full led tail light replacement would be nice preferably something similar to the 2009 rx8 with 2 led rings
"Smoked Clear Coners" basicly a set of clear corners but with a smoked tint to it, or maybe completely clear with a black trimming inside the reflectors.
variety of shift *****, preferably unique and customized to suit the rx8
different color interior bulbs, (id like some purple/violet ones lol)
#75
Registered
iTrader: (6)
Join Date: Jun 2007
Location: Pleasanton, CA
Posts: 1,781
Likes: 0
Received 0 Likes
on
0 Posts
something ive always wanted...Blacked out emblems.
id really like a set of high quality black emblems, for the M, Mazda, and RX-8, preferably a blackish/chrome look...should be easy enough guys.
oh and a full led tail light replacement would be nice preferably something similar to the 2009 rx8 with 2 led rings
"Smoked Clear Coners" basicly a set of clear corners but with a smoked tint to it, or maybe completely clear with a black trimming inside the reflectors.
variety of shift *****, preferably unique and customized to suit the rx8
different color interior bulbs, (id like some purple/violet ones lol)
id really like a set of high quality black emblems, for the M, Mazda, and RX-8, preferably a blackish/chrome look...should be easy enough guys.
oh and a full led tail light replacement would be nice preferably something similar to the 2009 rx8 with 2 led rings
"Smoked Clear Coners" basicly a set of clear corners but with a smoked tint to it, or maybe completely clear with a black trimming inside the reflectors.
variety of shift *****, preferably unique and customized to suit the rx8
different color interior bulbs, (id like some purple/violet ones lol)