New Here... (long story) - RX8Club.com



Reply
 
 
 
Thread Tools Search this Thread Rate Thread
Old 09-20-2013, 09:48 PM   #1
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
New Here... (long story) Lots of pics!! Update 08/12/2014

UPDATE!!! 08/12/2014

Hello my fellow rx8 rotary lovers... I'm new here, Kinda. been a member Since July of 2012.

let me first start with some backround.

I am from Gilroy, CA. went to San Diego to purchase my 2004 Mazda RX-8 GT. Lightning Yellow. she was a beauty, fully loaded, heated seats, leather, Bose,
sport pckge etc etc...

Brought her home, (thanks to this forum i've been making full use of the "Search" function.)

Because of a CEL. i replaced the coils, plugs, wires, air filter and gas cap.
she ran superb for a few months, then my uh "bearing" for the tranny went out. forgot what it was called, so i went ahead and replaced the clutch with a Exedy Organic clutch kit. (no more Slipping) purchased at 62k miles.

First things i did was window tint, paint stock rims Black, put in Grom Bluetooth to stream music via my iphone BLuetooth. then i put in a Single Alpine Type-R 10" Sub. and Alpine Mono AMP. sat on that untill april-may 2013.


Here are pics of it stock...with tint and system

Name:  photo1.jpg
Views: 97
Size:  84.9 KB
Name:  photo3.jpg
Views: 96
Size:  83.2 KB

Then Between April-May 2013 the MOD bug got a hold of me and i started making large orders of parts... i was already lurking these forums and Google, i knew what i wanted.


The Paint Process...

Name:  image_12-Copy.jpeg
Views: 99
Size:  86.2 KB
Name:  image_22.jpeg
Views: 98
Size:  79.6 KB



UPDATE!! 08/12/2014


Here's the list of what i put in to date.

Exterior:
- Genuine Mazdaspeed Bumper
- Mazdaspeed R3 side skirts
- MS Replica Carbon Fiber Wing
- MS Replica Rear bumper
- Seibon Carbon Fiber Hood
- Voltex Custom V mount Type 3 Wing (on the way still, ordered in April 2014)
- Carbon Fiber side skirt Lip
- Carbon Fiber License plate Holder
- Carbon Fiber Mirror Covers
- Changed Paint color to Circa 2005+ Honda S2000 Yellow Pearl.
- Volk TE37SL 18x9.5 +22
- Federal Evo 595 225/35/18 Tires
- Stance GR+ Coilovers
- StopTech Cross Drilled and Slotted Rotors
- Nissan Z32 4pot caliper conversion
- Hawk HPS Pads
- StopTech Steel Braided Lines
- LED lighting on Lic plate, etc
- Mazdaspeed Yellow Fog Lights

Interior:
- LED Lighting upgrade
- GROM Bluetooth adapter to stream Music via BLuetooth
- Alpine Mono AMP
- Alpine 10" Type-R Sub and enclosure
- LOC for signal to amp.
- Re-Upholstered Red leather Seats (heated still)
- Digital Guard Dawg RFID Push button start and keyless entry. (will get pics soon)
- AutoExe Steering Wheel
- Alcantara Head Liner
- Cusco 6-Point Cromoly Roll cage
- Cusco Carbon Fiber Bolt on bars for the rear, they cross in a X pattern
- New floor mats OEM
- ProSport Evo oil pressure, oil temp, water temp, AFR, Boost Gauges
- LO-TEK Center 3 Gauge pod

Engine Bay:
- BHR ignition KIT
- K&N stock filter
- Mazmart Low Temp T-Stat
- Mazmart Upgraded Water Pump
- oil temp and pressure sensor sandwich
- water temp sensor adaptor
- Axial Short Shifter
- Resevoir tank upgrade
- Koyo Radiator
- RX8 Performance Dual oil cooler fans
- Apex-i Single Exit Turbo N1 Muffler.
- BHR Midpipe upgrade
- Cusco Carbon Fiber Strut Bar



AND HERE"S THE TRANSFORMATION SO FAR...


Name:  image_52.jpeg
Views: 96
Size:  99.2 KB
Name:  image-1.png
Views: 93
Size:  432.4 KB
Name:  image_62.jpeg
Views: 94
Size:  140.0 KB
Name:  image_32.jpeg
Views: 95
Size:  75.6 KB
Name:  image_3.jpeg
Views: 93
Size:  244.0 KB
Name:  image_82.jpeg
Views: 94
Size:  99.4 KB
Name:  image_72.jpeg
Views: 94
Size:  121.8 KB
Name:  image_42.jpeg
Views: 102
Size:  104.0 KB
Name:  image_4.jpeg
Views: 104
Size:  124.9 KB
Name:  image2-Copy.jpeg
Views: 94
Size:  230.9 KB
Name:  image_1-Copy.jpeg
Views: 102
Size:  185.3 KB
Name:  image_2.jpeg
Views: 103
Size:  156.0 KB
Name:  image_5.jpeg
Views: 99
Size:  110.7 KB
Name:  image_6.jpeg
Views: 99
Size:  104.7 KB
Name:  image_7.jpeg
Views: 102
Size:  71.1 KB
Name:  image_8.jpeg
Views: 95
Size:  76.9 KB
Name:  image_9.jpeg
Views: 99
Size:  100.6 KB
Name:  image_10.jpeg
Views: 98
Size:  92.1 KB
Name:  image_11.jpeg
Views: 99
Size:  90.0 KB
Name:  image_12-1.jpeg
Views: 98
Size:  88.4 KB
Name:  image_13.jpeg
Views: 95
Size:  121.2 KB
Name:  image.jpeg
Views: 102
Size:  66.6 KB
Name:  image-2.jpeg
Views: 102
Size:  136.3 KB
Name:  image1.jpeg
Views: 94
Size:  66.3 KB



Thank you for your time... and i am glad i finally introduced myself.

Last edited by bb6guy; 08-12-2014 at 05:22 PM. Reason: update
bb6guy is offline   Reply With Quote
Old 09-20-2013, 10:59 PM   #2
Bikes are Rotaries
 
Stephen T's Avatar
 
Join Date: Feb 2013
Location: Kerikeri, NZ
Posts: 303
Thanks: 0
Thanked 0 Times in 0 Posts
Lol. I just tried to look and snapfish is not my friend. You are bloody organised, good on you. Big Caiun shares your love of yellow....and it looks good too. I'll follow with interest. Cheers.
Stephen T is offline   Reply With Quote
Old 09-20-2013, 11:10 PM   #3
I HATE SPEEDBUMPS!
 
monchie's Avatar
 
Join Date: Nov 2007
Location: Las Vegas, NV
Posts: 8,549
Thanks: 0
Thanked 0 Times in 0 Posts
Welcome to the club!
monchie is offline   Reply With Quote
Old 09-21-2013, 12:21 AM   #4
El Jefe
 
yomomspimp06's Avatar
 
Join Date: Mar 2007
Posts: 1,771
Thanked 0 Times in 0 Posts
curious to see where this goes... 600whp is a HUGE goal on the renny.
yomomspimp06 is online now   Reply With Quote
Old 09-23-2013, 01:52 PM   #5
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Now the FUN part!

should have had this all done in June 2014.... but i bought a new car.


Name:  photo5.jpg
Views: 93
Size:  113.8 KB


Anyways... Continuing

This will all be in the car, running and tuned by the end of the month (August 2014). Will have 2 tunes, 91oct and e85. I'm sure i will forget somethings, bare with me.
Engine is being built by Daniel kuo at Garage Life in LA.


- 13b-rew swap
- RX8Performance Swap engine mount Kit
- Xcessive LIM
- Bridgeport
- 13B stud Kit
- Atkins Overhaul Kit
- Rotary Aviation 2mm Apex Seals
- T4 Custom Turbo Manifold
- Garrett GTX4294r 1.15ar
- Injector Dynamics 2000cc x 4
- Injector Dynamics 1000cc x 2
- 4'' Downpipe and 4" Exhaust
- Custom 3" intercooler pipping
- Adaptronics Standalone ECU
- LS3 Ignition Coils
- Walbro 485 Fuel Pump E85
- Steel Braided Fuel Lines
- FueLab FPR
- Full Function Engineering Fuel Kit
- FFE 4 Injector Fuel Rail
- FFE 2 injector primary fuel rail
- Tial Q 50mm BOV
- HKS 50mm Wastegate
- Full Race Vacuum Block
- RX8Performance Catch Can
- Mac Boost Valve
- Apex-i Turbo Timer
- ACT Clutch Kit


That's it for now.... i think

Name:  photo.jpg
Views: 100
Size:  193.9 KB



UPDATE!! 08/12/2014



Goal: 600WHP





UPDATE!! 08/12/2014 PICS!

WekFest Long Beach May 2014

Name:  photo23.jpg
Views: 106
Size:  355.8 KB
Name:  photo44.jpg
Views: 102
Size:  129.7 KB
Name:  photo12.jpg
Views: 101
Size:  82.2 KB
Name:  photo43.jpg
Views: 98
Size:  84.2 KB
Name:  photo33.jpg
Views: 99
Size:  151.6 KB

Blox Evolution (July 2014)

Name:  photo2-1.png
Views: 94
Size:  717.7 KB
Name:  photo1-1.png
Views: 101
Size:  647.7 KB
Name:  photo34.jpg
Views: 98
Size:  185.7 KB
Name:  photo52.jpg
Views: 97
Size:  130.3 KB
Name:  photo13.jpg
Views: 99
Size:  119.3 KB
Name:  photo3-1.jpg
Views: 103
Size:  154.5 KB
Name:  photo2-2.jpg
Views: 102
Size:  75.4 KB
Name:  photo1-3.jpg
Views: 99
Size:  145.6 KB

Last edited by bb6guy; 08-12-2014 at 02:13 PM. Reason: Update
bb6guy is offline   Reply With Quote
Old 09-23-2013, 01:55 PM   #6
Verbose SuperMod
iTrader: (2)
 
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,655
Thanks: 0
Thanked 63 Times in 36 Posts
Hmm. You realize that the published world record for a Renesis is somewhere about 500whp? And that engine didn't last very long at all.

Perhaps you mean the 13b from an RX-7? Completely different motor, and swapping it is no simple matter.
RIWWP is offline   Reply With Quote
Old 09-23-2013, 01:56 PM   #7
Triangular Bee Hive
iTrader: (3)
 
ShinkaEvo's Avatar
 
Join Date: Feb 2008
Location: Socal, LA
Posts: 779
Thanks: 0
Thanked 0 Times in 0 Posts
sry, but 600 renny won't last long, not even the 13b-rew.
Why not do 20b swap?
ShinkaEvo is offline   Reply With Quote
Old 09-23-2013, 02:00 PM   #8
Un-Registered User
 
Slidin8's Avatar
 
Join Date: Aug 2012
Location: NZ Brahhhhh
Posts: 1,209
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by bb6guy View Post
Thanks
Guys I will keep you all updated...

As for 600whp. Yes it's big. But I found a builder who
Builds renesis motors to make 600+ on a daily basis.
I'll be going through him
And who is this builder?
Slidin8 is offline   Reply With Quote
Old 09-23-2013, 02:04 PM   #9
Life begins @ 30 psi
 
blackenedwings's Avatar
 
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by bb6guy View Post
Thanks
Guys I will keep you all updated...

As for 600whp. Yes it's big. But I found a builder who
Builds renesis motors to make 600+ on a daily basis.
I'll be going through him
Welcome to the forums, it certainly looks like you have lofty goals. RIWWP told me to be nice so...

600 whp is not possible on a Renesis. As far as I'm aware not only is it not being done on a "daily basis" it's never been done even once, by any rotary builder in the entire world. 600 whp 13B-REW motors are more common, but notoriously unreliable. The Renesis motor differs significantly from the 13B-REW from the RX-7, particularly in the exhaust ports. It was not designed as a turbocharged motor and has proven to be extremely difficult to turbocharge even with modest power goals (~300 whp). The highest whp Renesis that I'm aware of was running on E85 at just over 500 whp before it exploded nearly immediately.

I ran a turbo RX-8 at 330 whp for over a year, and now race a 500+ whp Evo so I have some idea of what I'm talking about. I don't mean to sh*t on your goals, but you should probably spend some more time in the Major Horsepower forum to get a more reasonable gauge on what is possible.

Best of luck with your car!
blackenedwings is offline   Reply With Quote
Old 09-23-2013, 02:32 PM   #10
Hibernating -.-
iTrader: (4)
 
FungsterRacing's Avatar
 
Join Date: Jul 2010
Location: Saskatchewan
Posts: 597
Thanked 0 Times in 0 Posts
You definitely chose the BEST color for this car

You say MS urethane kit, so then it is not authentic. I can't see much from the picture, but what was your overall fitment/fitment issues that you experienced?

Very organized and very nice car. I too agree that 600whp is really pushing it, but money can do crazy things
FungsterRacing is offline   Reply With Quote
Old 09-24-2013, 02:48 AM   #11
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Thanks for all the input guys, i have considered a lot of other options ie: 20b, 13b-rew, 3 rotor convert, ls2, etc...

i've owned many different cars, 04 GTO, 95 Integra (boost), 05 S2000, 95 M3, 01 Prelude,
The RX8 by far is the most fascinating and pain in my a** haha... but i enjoy it, its a sports car... just like the others i've owned, aside from the Integra.

however, i want to stick to the renesis, build it, studs, water jackets seals, exhaust/intake ports, apex seals, half bridge, run on e85, run a 6466 BB turbo, etc etc....

the 600whp may not be possible but i'd like to try...and my engine build budget is 10k
and turbo build budget is 6k. i want the renesis because of the RPM range of 9k and the powerband i would be able to utilize, (the other motors, 20b, 13b rew, i believe redline at 6-7k rpm)

I have spent a lot of time around boosted cars and building them, i had a Acura integra a while back putting down 536whp 91oct/water/meth inj. 50/50, 6262, 25lbs... my Twin brother, (yes i have a identical twin) chose to go the american auto maker route, and has a 05 Dodge SRT-4 built from the oil pan up! we got that to put down 913whp on e85 with a BB 6466. that car is driven 3 days a week lol. so i am very familiar with power and what it takes to get there, especially the $$$ part. However, i know the Renesis is a sensitive motor compared to these that i've built and drove before, i've done a lot of reading on this motor and i know it isn't the best in the world to make ridiculous HP. but i'd like to try.. i enjoy a good challenge. plus i love the smoothness of the motor and i love my RX8.

if i blow it up on the dyno trying to hit my goal, then i'll suck it up and build a 20B. to put in.
i am extremely fascinated with the rotary engine and would like to stick to it, but i am open to other options (ls3) etc.

The builders shop is in LA, name of (GarageLife)

Yes the Poly Urethane kit is a Replica, it was a B**** to get genuine OEM mazdaspeed as it was discontinued, i was originally going to purchase through a website i found here, i placed the order and 2 weeks later they told they couldnt fulfill my order, out the door price was around 3K. do i serched more and found the REPLICE urethane kit, cost me 2k which include the CF rep wing.

the overall fitment was pretty good! the shop only had to do minor shaving/sanding to smooth out some places. no real fitment issues, fit pretty well.

The color took me a while to choose but thank you! i do believe it was the best color i could pick.

if anyone is curious
the paint code is: Y-65P

BTW... PICS ARE UP!
bb6guy is offline   Reply With Quote
Old 09-24-2013, 03:16 AM   #12
El Jefe
 
yomomspimp06's Avatar
 
Join Date: Mar 2007
Posts: 1,771
Thanked 0 Times in 0 Posts
I thought fitment was kinda bad around the hood area. Well, I'm glad you will attempt a High Horsepower build. I hope you document well and keep us updated. I also would like dibs on a part out if it happens in the future lol
Good Luck man
yomomspimp06 is online now   Reply With Quote
Old 09-24-2013, 09:54 AM   #13
Life begins @ 30 psi
 
blackenedwings's Avatar
 
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by bb6guy View Post
however, i want to stick to the renesis, build it, studs, water jackets seals, exhaust/intake ports, apex seals, half bridge, run on e85, run a 6466 BB turbo, etc etc....
If you had done the research you are claiming you would know that none of those measures will improve the engines resistance to detonation or ability to handle boost. I've had a fully built, ported, doweled, upgraded seals Renesis built and ended up selling it when I realized it did nothing to provide additional security for a turbo setup. In fact, the main reason that Renesis turbo engines fail (side seals) cannot be improved by any current aftermarket parts.

Quote:
Originally Posted by bb6guy View Post
the 600whp may not be possible but i'd like to try...and my engine build budget is 10k
and turbo build budget is 6k. i want the renesis because of the RPM range of 9k and the powerband i would be able to utilize, (the other motors, 20b, 13b rew, i believe redline at 6-7k rpm)

i've done a lot of reading on this motor
You are throwing your money away. I spent significantly more than your listed budget to get a "reliable" 330 whp Renesis.

All rotary engines can have the same powerband and redline. The reason many 13B-REW engines shift earlier is due to the turbo altering the torque curve, making it pointless to rev to 9000 rpms. The same effect occurs on a Renesis with a properly sized turbo. I have no idea who told you that the Renesis had some sort of improved power band or rev range, but that is flatly wrong. You need to do a LOT more reading.

Quote:
Originally Posted by bb6guy View Post
if i blow it up on the dyno trying to hit my goal, then i'll suck it up and build a 20B. to put in.
Your budget doesn't even come close to the cost of a 20B swap. You are looking at a minimum of $30k for a 20B swap unless you are doing all the labor yourself. For your budget, the best choice for the platform is actually doing a 13B-REW swap. There are a handful of guys on this forum with very clean REW RX-8s which they were able to do for a budget similar to yours.

I'm trying to help you save tens of thousands of dollars, because I went down this path with much more realistic goals and flushed that money down the toilet. If you continue at this point, it isn't because you didn't have the information available to you.
blackenedwings is offline   Reply With Quote
Old 09-24-2013, 10:06 AM   #14
Verbose SuperMod
iTrader: (2)
 
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,655
Thanks: 0
Thanked 63 Times in 36 Posts
I just googled GarageLife, and I was right, RX-7 builds.

The 13b in the RX-7 is NOT the same engine as the 13b in the RX-8. Seemingly minor differences that have a huge impact on the Renesis' ability to make high power.

The list of items you have may address immediate survival problems, but in the end, you have the same biggest problem that every other high horsepower Renesis faces: Side seal heat. Adding power to a Renesis directly increases the amount of heat you are shoveling through the side exhaust ports, and the higher the heat goes, the more the side seal springs start warping. Once they warp far enough to push the side seal out of place, the seal clips the exhaust port and boom, engine shatters. There is NO known way to get around this problem. The only way to improve the lifespan of the engine is to literally reduce power. The lower power you aim for, the longer the engine will last before the same problem happens.

This is assuming that every single piece of the entire build is PERFECT, and it has to be perfect on the very first try. The engine has zero tolerance for flaws when boosted.

We aren't flaming or bashing you, we are trying to educate you so you don't waste your money. Sure, use the budget for a turbo build, but you clearly are missing some of the critical pieces of information, and with that budget you should be able to hit about 300whp reasonably well and get maybe 20-30k out of it. Maybe.
RIWWP is offline   Reply With Quote
Old 09-24-2013, 01:06 PM   #15
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Thanks for the info guys, I'm convinced on doing a 13b-rew swap. I missed the "side seal" part, should have read more in depth... I guess it's a good thing I finally introduced myself and lay out my plans?
bb6guy is offline   Reply With Quote
Old 09-24-2013, 01:31 PM   #16
Life begins @ 30 psi
 
blackenedwings's Avatar
 
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by bb6guy View Post
Thanks for the info guys, I'm convinced on doing a 13b-rew swap. I missed the "side seal" part, should have read more in depth... I guess it's a good thing I finally introduced myself and lay out my plans?
13B-REW swaps are very cool. One of the cleanest ones I've seen on here is:

https://www.rx8club.com/rx-8-multime...rx-8-a-219966/

You might ask him some questions about his build, but I believe he's been very happy with the car.

It's a very rare new forum poster who is able to listen and absorb advice when they conflict with their plans. Best of luck with your car. Btw, I do love the paint. :D
blackenedwings is offline   Reply With Quote
Old 09-24-2013, 01:38 PM   #17
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Well I am fairly new to the rotary game, and
It is very different to boost compared to a piston platform like I've done before, so I am open to feedback and listening to the ones who know more and have been around these engines more than I have... I could have wasted a lot of money if it hadn't been for you guys telling me about the side seal and spring failure. And to date apparently there is no known mod or fix. And to reach my power goals it realistically isn't possible with the renesis... Btw my budget is not capped it was either dump a lot of money into the 8, or buy a 2nd toy (supra) and make a freeway queen.
bb6guy is offline   Reply With Quote
Old 09-24-2013, 03:16 PM   #18
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
The LS2 or LS3 is an option too.
bb6guy is offline   Reply With Quote
Old 08-12-2014, 02:23 PM   #19
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Update!! 08/12/2014

Bump!! New Updates and Added Pics to original Posts!!!


Some Fire Spitting for you guys


bb6guy is offline   Reply With Quote
Old 08-20-2014, 03:59 PM   #20
Registered
 
Join Date: Jul 2014
Location: Detroit, MI
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
Nothing much of use to contribute. But I just wanted to say dayum. Well done man. REEAALLYY well done. I hope you hit that 600 hp mark and your car doesnt explode, I really do.
TWTCH is offline   Reply With Quote
Old 10-10-2017, 08:37 PM   #21
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Update!

My car has been featured in Super Street Magazine.
And it is now getting the new rocket bunny kit installed.
please follow my IG for updates. @gq_rx8

🍺
bb6guy is offline   Reply With Quote
Old 10-10-2017, 11:42 PM   #22
Koi no Ousama
iTrader: (25)
 
TeamRX8's Avatar
 
Join Date: Apr 2005
Posts: 19,757
Thanks: 0
Thanked 135 Times in 120 Posts
So you left us all hanging; what did you ever do for an engine?
TeamRX8 is online now   Reply With Quote
Old 10-11-2017, 11:03 AM   #23
Registered
Thread Starter
 
Join Date: Aug 2012
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Sorry about that haha. Swapped a 13b-rew, built it, Bridgeport, did a Garrett GTX4202r turbo, flex fuel, 6 injectors etc etc etc.... lol used the 6 speed for a bit. Swapped in the rx8 5 speed from Japan. Car made a little over 700whp on e85..... check my Instagram page.
bb6guy is offline   Reply With Quote
Old 10-11-2017, 12:31 PM   #24
Koi no Ousama
iTrader: (25)
 
TeamRX8's Avatar
 
Join Date: Apr 2005
Posts: 19,757
Thanks: 0
Thanked 135 Times in 120 Posts
Yeah, that’s a big turbo, nice
TeamRX8 is online now   Reply With Quote
Old 10-13-2017, 04:11 PM   #25
Registered
 
Join Date: Sep 2005
Location: Tampa
Posts: 359
Thanks: 0
Thanked 6 Times in 6 Posts
I have a great question for you. Are you using adaptronics? If so, what is the first trigger angle number from aligning your motor?
strokercharged95gt is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
COBB AccessPort Hunterkelley24 Series I Engine Tuning Forum 8 10-14-2017 10:36 PM
Rough Idle - Stalling after long drive Shankapotamus3 Series I Trouble Shooting 26 11-06-2016 08:26 AM
{ FS } 2007 STX Prepped Mazda RX-8 fourwhls RX-8's For Sale/Wanted 6 11-02-2015 01:25 PM
A parade of symptoms, need help RevMeHarder New Member Forum 5 09-22-2015 06:36 PM
Dealer compression test questions TJSiegrist New Member Forum 9 09-10-2015 09:29 AM


Tags
6466, pte, s2000, stock

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 07:32 PM.


All content Copyright 2017 by Internet Brands, Inc.