Originally Posted by dannobre
(Post 4526445)
Options are...
Section LIM and re-weld shorter Cut and rebox firewall...not muchvroom behind though...heater core and AC evap back there Rework motor mounts.. |
You can cut it horizontally and take out about an inch or more and reweld it. That will lower the upper by that amount and it may fit
|
Xcessive FD Lower Intake Manifold is a bolt on option.
Moves the lim further forward to clear the firewall. . |
^^+1.
LIM - lower intake manifold |
https://db.tt/L7Gv1AUq
i planned to do that .....what u think |
Could work if you will get enough room.
Basically that won't give you much room...so before you go that way you need to make sure it will be enough room |
https://db.tt/L7Gv1AUq
here some pics ...I hope that cut can't solder in the machine shop. |
Vic you realize that the engine moves while you're driving it right? Even if the manifold isn't touching the firewall, at some point it will-there's definetly not enough room there. Please don't leave it like that...
|
All times are GMT -5. The time now is 01:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands