Notices
New Member Forum A place for new members to get their feet wet

Rx-8 Stalling: DIY mishap broke nipple off fuel pump

Old May 17, 2015 | 08:21 PM
  #1  
Dravethe's Avatar
Thread Starter
Registered
 
Joined: Aug 2010
Posts: 16
Likes: 0
Rx-8 Stalling: DIY mishap broke nipple off fuel pump

Hey guys,

Long time lurker here, anyways, recently my Rx-8 has been acting up. It has a history of being unable to start when hot for about the past year; However, it was was manageable I worked my schedule around that (Meaning I would never go anywhere without giving it time to cool).

About two weeks ago, my 8 started to not want to idle correctly, stalling, and inevitably dying. Couple that with my hot start problem and it's a bad time.

Naturally, I thought it was battery, plugs, coils, or cables. Well, I changed all of those, checked the battery, and gutted the cat without any benefit to the symptoms. So I planned on taking it to the dealer, but money is somewhat tight at the moment so I am kind of putting it off.

Tonight, as a hail Mary, I decided to see what the fuel pump sock looked like, but when attempting to fuel like off the plastic nipple broken without much resistance . I attached a picture below to clarify the piece.

Anyways, does anyone know if I can just order that particular part, order another fuel pump, or does anyone else have any other ideas? I can take a picture of mine is necessary.

Also does anyone have any other comments regarding my 8's symptoms.



Reply
Old May 17, 2015 | 10:14 PM
  #2  
SupersonicDonut's Avatar
Registered
 
Joined: May 2015
Posts: 13
Likes: 0
From: Central Tx
https://www.rx8club.com/new-member-f...causes-249529/

I'm a total newb, but the eccentric shaft sensor is the only thing (besides low compression) listed in trouble starting when hot/idle issues, stalling sections.

with that plastic though, unless you are proficient in plastic welding, probably safer to try and find a new one.

G/l

Hope you find something out from someone more experienced

Edit: try looking here, the MAF sensor probably could use a look at least, being so easy to get too. https://www.rx8club.com/series-i-tec...7/#post2927771

Last edited by SupersonicDonut; May 17, 2015 at 10:18 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
drebbrnator
Series I Trouble Shooting
11
Dec 27, 2018 07:02 PM
harithac
New Member Forum
15
Aug 26, 2015 09:24 AM
GracefulShanks
New Member Forum
9
Aug 18, 2015 11:40 AM
dbarber
Series I Trouble Shooting
14
Jul 25, 2015 01:34 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 01:06 AM.