Notices
New Member Forum A place for new members to get their feet wet

removal of navigation and radio No crank please help

Old Mar 12, 2020 | 11:11 AM
  #1  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
removal of navigation and radio No crank please help

I have 2007 with bose and navigation 6 speed manual when I got the car it cranked over. wanted to delete the navigation for a nexus 7 but keep the stock head unit in place for a/c control but also delete audio functions.
added a aftermarket deck where the navigation cd was in the back wired to amp removed all bose speakers for aftermarket hooked up nexus to bluetooth of aftermarket deck all of that works dash lights work interior lights work head lights work a/c works . No brake lights no crank no start been searching for navigation delete for a week now aswell as audio no luck frustrated looking for a path to success. any help appreciated thanks
Reply
Old Mar 12, 2020 | 11:13 AM
  #2  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
Also torq or obd scanner can not read.
Reply
Old Mar 12, 2020 | 12:35 PM
  #3  
CaymanRotary's Avatar
Registered
 
Joined: Sep 2017
Posts: 1,912
Likes: 287
From: Cayman Islands
Could be the immobilizer. Do you notice the red key symbol on the dash?
Reply
Old Mar 12, 2020 | 12:55 PM
  #4  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
No red key
Reply
Old Mar 12, 2020 | 12:57 PM
  #5  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
Removal of navigation and radio no crank please help

No red key on dash.
Reply
Old Mar 12, 2020 | 01:01 PM
  #6  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
Removal of navigation and radio no crank please help.

Looking over diagrams and searching to the point no other posts to read. I think should be a way to de pin re pin some connectors getting car to think it has no Bose or navigation? Audio shouldn’t make car not start but the way these systems are I can make no sense of it.
Reply
Old Mar 12, 2020 | 01:16 PM
  #7  
Ricky SE3P's Avatar
Project Seca
iTrader: (10)
 
Joined: Dec 2010
Posts: 1,789
Likes: 648
From: SoCal
Blown fuse.
Reply
Old Mar 12, 2020 | 03:28 PM
  #8  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
checked with multi meter
Reply
Old Mar 12, 2020 | 03:43 PM
  #9  
CaymanRotary's Avatar
Registered
 
Joined: Sep 2017
Posts: 1,912
Likes: 287
From: Cayman Islands
Originally Posted by roxy524
checked with multi meter
You checked the fuse AND the starter relay?
Reply
Old Mar 12, 2020 | 08:58 PM
  #10  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
yes and the obd port what has me thinking something with navigation or radio. I can find a bunch of how to add navigation not one how to remove. I tried the google search also tried the advanced search for posts and titles within the audio forum..
Reply
Old Mar 12, 2020 | 09:08 PM
  #11  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
I get this message whats needed to post in other areas? roxy524, you do not have permission to access this page. This could be due to one of several reasons:
  1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
  2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
Log Out Home

Reply
Old Mar 12, 2020 | 09:14 PM
  #12  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
Tried resetting the ecu no sweep can not tell if it worked but holding the trip button turning ignition on I get a bunch of Off. only thing not connected is the navigation equipment somewhere i need to re pin bypass it diagram has it everywhere someone has know the secret.
Reply
Old Mar 12, 2020 | 09:47 PM
  #13  
CaymanRotary's Avatar
Registered
 
Joined: Sep 2017
Posts: 1,912
Likes: 287
From: Cayman Islands
Originally Posted by roxy524
I get this message whats needed to post in other areas? roxy524, you do not have permission to access this page. This could be due to one of several reasons:
  1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
  2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
Log Out Home
Just need to post one more time. As for your problem, any particular wires you messed with and shouldn’t have? Changing out the stereo deck should not cause issues for car to start unless immobilizer is activated. I’ve messed around back there many times fitting new radio decks.
Reply
Old Mar 12, 2020 | 10:44 PM
  #14  
roxy524's Avatar
Thread Starter
Registered
 
Joined: Mar 2020
Posts: 10
Likes: 0
I did not remove the factory radio I removed all the speakers wired in my own wired in a bluetooth deck in the spot navigation cd went. I think its something with 4v 4s for abs wondering why torq scanner with compatible obd does not connect. Thanks for the help going to hunt this down hopefully sooner than later
Reply
Old Mar 13, 2020 | 01:44 AM
  #15  
Ricky SE3P's Avatar
Project Seca
iTrader: (10)
 
Joined: Dec 2010
Posts: 1,789
Likes: 648
From: SoCal
Did you check ALL the fuses? Both under hood and inside the car by the footwell? It sounds like a fuse like the room fuse blew. Pull and visually inspect the fuses one by one.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pd123
Series I Interior, Audio, and Electronics
2
Apr 27, 2008 08:31 AM
AmKorp
Series I Interior, Audio, and Electronics
3
Jan 4, 2008 09:08 PM
u1cracka
Series I Interior, Audio, and Electronics
6
Dec 10, 2006 03:33 PM
Zephyr Words
Series I Interior, Audio, and Electronics
1
Jun 6, 2006 03:32 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 12:37 AM.