Notices
New Member Forum A place for new members to get their feet wet

Oil on air filter

Thread Tools
 
Rate Thread
 
Old Oct 15, 2013 | 11:26 AM
  #1  
Lws1496's Avatar
Thread Starter
Registered
 
Joined: Sep 2013
Posts: 13
Likes: 0
Oil on air filter

I have a 2005 rx8 auto. I was changing my coils and I noticed I had oil on my air filter and in the flex hose going to the filter box. What would cause this?
Reply
Old Oct 15, 2013 | 11:29 AM
  #2  
RX8Soldier's Avatar
Time for boost...
iTrader: (24)
 
Joined: Jun 2010
Posts: 5,414
Likes: 17
From: Canada
click
Also, read the stickies in this forum https://www.rx8club.com/new-member-forum-197/
Reply
Old Oct 15, 2013 | 11:30 AM
  #3  
paimon.soror's Avatar
Registered
iTrader: (15)
 
Joined: Jun 2010
Posts: 7,560
Likes: 27
From: Between Cones
overfilling engine oil is common cause, as the vapors start to work their way back up the filler neck and the vacuum from the intake pulls the oil through the intake tract.

1. Take care in not to overfill your oil

2. An Oil CatchCan will help alleviate this.
Reply
Old Oct 15, 2013 | 01:57 PM
  #4  
tonik's Avatar
Registered
 
Joined: Aug 2010
Posts: 272
Likes: 0
From: Toronto,On
or use funnel when u top-up the oil if u dont like to install catch can.
Reply
Old Oct 15, 2013 | 04:48 PM
  #5  
04Green's Avatar
Moder8
iTrader: (1)
 
Joined: Aug 2009
Posts: 2,578
Likes: 55
From: Oviedo, Florida
I would go with the catch can. Mine collects a lot of oil vapors and seems to condense them nicely. This keeps them from going through the engine. I run the oil fill, the oil injector vent and the intake lines to the input, and the Air Jet line to the output. Can slowly fills with very thin, very dirty oil. That oil does not go into intake, or into Jet Air.

Car is happy.
Reply
Old Oct 16, 2013 | 10:06 AM
  #6  
Lws1496's Avatar
Thread Starter
Registered
 
Joined: Sep 2013
Posts: 13
Likes: 0
What all do I have to do to install a catch can. I can work on simple stuff like tune ups but this sounds complicated.
Reply
Old Oct 16, 2013 | 10:09 AM
  #7  
paimon.soror's Avatar
Registered
iTrader: (15)
 
Joined: Jun 2010
Posts: 7,560
Likes: 27
From: Between Cones
Originally Posted by Lws1496
What all do I have to do to install a catch can. I can work on simple stuff like tune ups but this sounds complicated.
Literally pulling off the hose thats connected to the oil filler neck (the other end is going to your intake) and instead popping it into the catch can. The inlet of the catch can (they come with hoses as well in most cases) will connect to the oil filler neck.

Just imagine what you are doing here on a high level is placing a can in between that hose that runs from the oil filler neck to the intake.

Easy peasy.
Reply
Old Oct 16, 2013 | 11:10 AM
  #8  
Razz1's Avatar
Mu ha.. ha...
 
Joined: Aug 2004
Posts: 14,361
Likes: 3
From: Cali
Pull off hose at air filter tube. Examine size.

Go to hardware store.

Buy caps to cap off nipple.

Install cap.

Go to auto store.

Buy filter for the tube from the oil filler neck.

Install.


If you have SMOG check.

Uninstall.

Smaog car.

Re-install.

OR

Use funnel when filling oil and do not over fill.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
05TR1CH
New Member Forum
14
Apr 18, 2023 04:56 AM
Warrior777
RX-8 Parts For Sale/Wanted
207
Jun 24, 2019 04:47 PM
uZu
New Member Forum
13
Dec 30, 2015 12:35 PM
GK1707
RX-8 Parts For Sale/Wanted
8
Dec 2, 2015 10:01 AM
MrORAN6E
New Member Forum
2
Jul 24, 2015 09:32 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:25 PM.