OEM Spoiler Carbon Fiber Extender Anyone?
#1
New Member
Thread Starter
OEM Spoiler Carbon Fiber Extender Anyone?
Does anybody have any information on where i can grab a pair of these extenders?
Been looking around and couldn't seem to find any info or anyone selling them...
Any information will be greatly appreciated 🙏
Many thanks for your attention!
#3
No respecter of malarkey
iTrader: (25)
most people can’t see what’s right in front of their eyes; what does the license plate say?
they’re made by Auto Craft Evolution in Japan and are available in paintable FRP material, in factory paint, or carbon
???????????????????? / ?????????(RX-8)FRP
$385 for unpainted FRP version here
https://www.nengun.com/auto-craft-ev...rear-wing-base
which it says they’re for the S2, but I’m not sure that the S1 is different, might be risky.
they’re made by Auto Craft Evolution in Japan and are available in paintable FRP material, in factory paint, or carbon
???????????????????? / ?????????(RX-8)FRP
$385 for unpainted FRP version here
https://www.nengun.com/auto-craft-ev...rear-wing-base
which it says they’re for the S2, but I’m not sure that the S1 is different, might be risky.
The following users liked this post:
Jim Whitley (01-20-2021)
#4
No respecter of malarkey
iTrader: (25)
後期純正リアウィングを約100mmUP・約10°傾斜するベースを装着する事により、ダウンフォースの増 加を狙ったパーツです。
純正取付ネジ穴を利用しているので、無加工・ボルトオンで装着可能。また後方視界が悪くならない高さ設定に なっています。
カーボン仕様¥65,000-(税別)
・適合車種:RX-8(SE3P)MC後期対応
・前期の場合後期リヤスポイラー(純正品番F197-51-960B各純正色有)を購入することにより取付可能。
・車検対応
・純正カラー塗装済商品
ソリッド色 +¥15,000(税別)-
メタリック・パール色+¥19,500(税別)-
・FRP製 黒ゲル仕上げ(未塗装)
※カード決済について※
メッセージ欄に「カード決済希望」と入力頂ければ
後日、ご案内のメールを送らせて頂きます。
リアウィングベース(RX-8)FRP
商品コード: 5846
関連カテゴリ: マツダ RX-8(SE3P)
マツダ RX-8(SE3P) > ドレスアップ
販売価格(税込): 38,500 円
______________________
This is a part that aims to increase downforce by installing a base that raises and tilts about 100 mm UP and about 10 ° to the late (S2) genuine rear wing.
Since it uses genuine mounting screw holes, it can be mounted without processing and bolt-on. In addition, the height is set so that the rear visibility does not deteriorate.
Carbon specification ¥ 65,000- (excluding tax)
・ Compatible model: RX-8 (SE3P) MC late compatible (SERIES 2)
・ In the case of the first half, it can be installed by purchasing the second half rear spoiler (genuine part number F197-51-960B with each genuine color).
・ Vehicle inspection support
・ Genuine color painted products
Solid color + ¥ 15,000 (excluding tax)-
Metallic pearl color + ¥ 19,500 (excluding tax)-
・ FRP black gel finish (unpainted)
* About credit card payment *
If you can enter "card payment request" in the message field
We will send you an e-mail to inform you at a later date.
Rear wing base (RX-8) FRP
Item code: 5846
Related category: Mazda RX-8 (SE3P)
Mazda RX-8 (SE3P)> Dress up
Sales price (tax included): 38,500 yen
純正取付ネジ穴を利用しているので、無加工・ボルトオンで装着可能。また後方視界が悪くならない高さ設定に なっています。
カーボン仕様¥65,000-(税別)
・適合車種:RX-8(SE3P)MC後期対応
・前期の場合後期リヤスポイラー(純正品番F197-51-960B各純正色有)を購入することにより取付可能。
・車検対応
・純正カラー塗装済商品
ソリッド色 +¥15,000(税別)-
メタリック・パール色+¥19,500(税別)-
・FRP製 黒ゲル仕上げ(未塗装)
※カード決済について※
メッセージ欄に「カード決済希望」と入力頂ければ
後日、ご案内のメールを送らせて頂きます。
リアウィングベース(RX-8)FRP
商品コード: 5846
関連カテゴリ: マツダ RX-8(SE3P)
マツダ RX-8(SE3P) > ドレスアップ
販売価格(税込): 38,500 円
______________________
This is a part that aims to increase downforce by installing a base that raises and tilts about 100 mm UP and about 10 ° to the late (S2) genuine rear wing.
Since it uses genuine mounting screw holes, it can be mounted without processing and bolt-on. In addition, the height is set so that the rear visibility does not deteriorate.
Carbon specification ¥ 65,000- (excluding tax)
・ Compatible model: RX-8 (SE3P) MC late compatible (SERIES 2)
・ In the case of the first half, it can be installed by purchasing the second half rear spoiler (genuine part number F197-51-960B with each genuine color).
・ Vehicle inspection support
・ Genuine color painted products
Solid color + ¥ 15,000 (excluding tax)-
Metallic pearl color + ¥ 19,500 (excluding tax)-
・ FRP black gel finish (unpainted)
* About credit card payment *
If you can enter "card payment request" in the message field
We will send you an e-mail to inform you at a later date.
Rear wing base (RX-8) FRP
Item code: 5846
Related category: Mazda RX-8 (SE3P)
Mazda RX-8 (SE3P)> Dress up
Sales price (tax included): 38,500 yen
#5
New Member
This is exactly what I was looking for (could not remember where I saw it before. $385 for unpainted FRP version I understand. How much for Velocity Red? I have a 2004 -> Will it fit? ( I currently do not have a rear spoiler but will have to find a stock one - so no holes yet in my trunk lid. I live in Canada but I can convert USD no problem.
#6
No respecter of malarkey
iTrader: (25)
you would have to order them specifically from Japan that way and again, these are for the 2009 - 2011 S2 RX8, so it’d have to be an S2 paint color and also might not fit on an earlier 2004 - 2008 S1 RX8
not sure what you’re thinking really and at that price no less, but have at it.
looks like you should order a new set of exhaust shrouds first any way ...
.
not sure what you’re thinking really and at that price no less, but have at it.
looks like you should order a new set of exhaust shrouds first any way ...
.
The following users liked this post:
Jim Whitley (01-20-2021)
#7
New Member
I am not sure if there is that much difference between the S2 and S1 but I have both at home. My friend has a 2009 R3 so I will measure. I can get painting done here no prob. Yes the Exhaust shrouds are faded on both sides.
Thread
Thread Starter
Forum
Replies
Last Post
DeadOriginal
Series I Exterior Appearance and Body Kits
7
11-11-2009 10:28 PM
magikone69
Series I Exterior Appearance and Body Kits
5
02-08-2008 11:42 AM