does anyone think this can be fixed?
#1
does anyone think this can be fixed?
So i got a junkyard bumper assembly for my rx8 i saved from being scraped and the cover came from a rx8 that had an engine fire and the driver side upper fender mount is melted. does anyone know how much it would be to fix if possible? (When i bought the bumper assembly he threw in the cover for free color matchs my car just seeing if its worth fixing if its even all that important will post pictures)
#4
Registered
It may be able to be salvaged but i don't think it would be worth the trouble IMO...
The middle that seems to be warped can probably be worked back into shape using hot water or a torch (what i used to repair mine).....
I ran a torch along the backside of the bumper with rapid passes to heat up the plastic where the mash was and slowly started working the mash out with my hands and a small rubber mallet, maybe give this a try and see if the middle can be straightened out...i attached a few pictures from my repair.....
The side markers are garbage and as for the third picture down where its all burnt, i don't know if that's repairable or worth it....maybe attach some more pictures of the burnt side markers?
Hope this helps and good luck!
pic 1 - before
pic 2 - after the repair
pics 3 & 4 are both....
The middle that seems to be warped can probably be worked back into shape using hot water or a torch (what i used to repair mine).....
I ran a torch along the backside of the bumper with rapid passes to heat up the plastic where the mash was and slowly started working the mash out with my hands and a small rubber mallet, maybe give this a try and see if the middle can be straightened out...i attached a few pictures from my repair.....
The side markers are garbage and as for the third picture down where its all burnt, i don't know if that's repairable or worth it....maybe attach some more pictures of the burnt side markers?
Hope this helps and good luck!
pic 1 - before
pic 2 - after the repair
pics 3 & 4 are both....
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
Danield97
Series I Trouble Shooting
1
09-30-2015 05:59 PM