Notices
New Member Forum A place for new members to get their feet wet

Automatic transmission conversion

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-29-2017, 10:03 AM
  #1  
New Member
Thread Starter
 
ninjabloke's Avatar
 
Join Date: Jun 2017
Posts: 3
Received 0 Likes on 0 Posts
Automatic transmission conversion

Can anyone help me out here I can only drive automatics and have been offered the chance to buy a RX8 2.6 231ps very cheaply it has a 6 speed manual, here in uk there don't seem to be any autos around so I want to put a automatic box from the 192ps version is this possible any help is appreciated.
Old 06-29-2017, 10:25 AM
  #2  
New Member
Thread Starter
 
ninjabloke's Avatar
 
Join Date: Jun 2017
Posts: 3
Received 0 Likes on 0 Posts
Thanks I'll give them a call
Old 06-29-2017, 10:35 AM
  #3  
New Member
Thread Starter
 
ninjabloke's Avatar
 
Join Date: Jun 2017
Posts: 3
Received 0 Likes on 0 Posts
lol

Cheers
Old 06-29-2017, 12:10 PM
  #4  
Registered
iTrader: (4)
 
BigBadChris's Avatar
 
Join Date: Aug 2014
Location: Dallas TX
Posts: 680
Received 28 Likes on 23 Posts
Automatic conversion

It should be possible, but the electronic gremlins are going to get you.

​​​​The PCM, ABS, immobilizer and TCM (transmission control module) all need to communicate. I don't think the PCM you have will talk to a TCM. Your best option is to import all the modules (computers) from the same car. You will also need the keys that are paired to the immobilizer.

​You will also need a custom tune because the injector staging will be different. (Six instead of four).

I did the opposite (auto to manual) and I'm still finding issues.

​​​​​​Good luck
The following users liked this post:
ninjabloke (06-29-2017)
Old 06-29-2017, 12:55 PM
  #5  
Registered
iTrader: (1)
 
Loki's Avatar
 
Join Date: Jun 2009
Location: Montreal
Posts: 7,723
Received 957 Likes on 835 Posts
You will want a PCM out of a 2007+ automatic, and even then it will not be able to fully operate a 231 6-port. The earlier automatics use a 4 port motor dissimilar from the 6 port you have now. In fact, it might be easier to replace the motor with one from an automatic as well.

Look, at that point you may as well just drive the automatic car and skip the hassle.
The following users liked this post:
ninjabloke (06-29-2017)
Old 06-29-2017, 02:05 PM
  #6  
Registered
 
Oats's Avatar
 
Join Date: Oct 2013
Location: SW Florida
Posts: 151
Likes: 0
Received 16 Likes on 15 Posts
Make sure the engine is good. Very cheap RX-8s are usually very cheap for a reason.
Old 06-29-2017, 02:30 PM
  #7  
Smoking turbo yay
 
UnknownJinX's Avatar
 
Join Date: Apr 2017
Location: BC, Canada
Posts: 3,104
Received 666 Likes on 592 Posts
Just curious, why can't you drive a MT? Do you have a physical condition that prevents you to?

Converting tranny is no cakewalk. Even for a late 90s Accord it will be a lot of work, not to mention an RX-8. You also won't have much resource since most people convert AT to MT, not the other way around.

Honestly, unless you really know what you are doing, just get an AT RX-8 or learn how to drive a stick, both of which will be cheaper and easier.



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 01:31 AM.