I am back and stuff for sale
11-10-2009, 01:40 PM
#1
To the BATMOBILE!!!!!!
Thread Starter
Join Date: Aug 2005
Location: Bowie, MD
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
I am back and stuff for sale
OK I am back and alot of parts are avaliable and I will say that I have NO money yet from Anybody wanting to put claim. I have given most people about a week since I have been back so I am going to open up my parts sale to everyone again. I am selling all the parts that I have listed here and I will say now that I feel my prices are quite resonable, so please don't try to be JERKS. OK so this is going to me the format. People who are going to pick up will get prefered treatment
The parts I list are avaliable till I recieve payment: Once i get payment it is yours and I will if need be send it out ASAP: ok so thats it now for the parts:
TURBOKIT!- (this is a Esmeril Kit built better. Replaced the CRAPPY 300.00 Chinese T-70 turbo that comes in the kit with a only used 3 times, fully installed Garrett T04e T3/4 turbo with a 60mm trim wheel The kit brand new cost 5850.00.
The difference in the turbos would make my kit new worth 6550.00. factoring for the 1000.00 for the new turbo and - the cheap turbo(300.00). The only parts of my kit that are going to be a problem is that the freakin wastegate took a hit driving to the shop to of all things, removing the turbokit. Go figure. what luck. because this part is about 350.00(high end by my math)= 6200.00 in its condition if new. Used -20%(1200.00)= $5000.00parts are off the car and in my garage.
RB Gauge Pod with three Gauge holder=150.00
True Boost electronic boost gauge/boost controller= 200.00
Wide Band Air/Fuel gauge=250.00
Oil temperature gauge with all the needed equipment= 100.00
If someone wants to purchase all 3 gauges and the holder from me I will discount 60.00 off (Total=640.00)
AFE ShortShifter= 200.00(SOLD)
JIC Coilover Kit with modified EDFC control unit= (Together)=700.00(SOLD)
RB STRAIGHT PIPE=120.00
Mazdaspeed Front Strut Bar=180.00
Mazdaspeed Rear Strut Bar=100.00
VIS Razor CF Hood=500.00 (New is 700.00 but this one has a superficial chip in one of the cowellings)
Mazdaspeed SP2 Exhaust=400.00 plus an exchange for your stock exhaust
GREY INTERIOR PANELS And Rear seats= If you need them let me know they will be your for little if anything. There in my garage taking up room.
The parts I list are avaliable till I recieve payment: Once i get payment it is yours and I will if need be send it out ASAP: ok so thats it now for the parts:
TURBOKIT!- (this is a Esmeril Kit built better. Replaced the CRAPPY 300.00 Chinese T-70 turbo that comes in the kit with a only used 3 times, fully installed Garrett T04e T3/4 turbo with a 60mm trim wheel The kit brand new cost 5850.00.
The difference in the turbos would make my kit new worth 6550.00. factoring for the 1000.00 for the new turbo and - the cheap turbo(300.00). The only parts of my kit that are going to be a problem is that the freakin wastegate took a hit driving to the shop to of all things, removing the turbokit. Go figure. what luck. because this part is about 350.00(high end by my math)= 6200.00 in its condition if new. Used -20%(1200.00)= $5000.00parts are off the car and in my garage.
RB Gauge Pod with three Gauge holder=150.00
True Boost electronic boost gauge/boost controller= 200.00
Wide Band Air/Fuel gauge=250.00
Oil temperature gauge with all the needed equipment= 100.00
If someone wants to purchase all 3 gauges and the holder from me I will discount 60.00 off (Total=640.00)
AFE ShortShifter= 200.00(SOLD)
JIC Coilover Kit with modified EDFC control unit= (Together)=700.00(SOLD)
RB STRAIGHT PIPE=120.00
Mazdaspeed Front Strut Bar=180.00
Mazdaspeed Rear Strut Bar=100.00
VIS Razor CF Hood=500.00 (New is 700.00 but this one has a superficial chip in one of the cowellings)
Mazdaspeed SP2 Exhaust=400.00 plus an exchange for your stock exhaust
GREY INTERIOR PANELS And Rear seats= If you need them let me know they will be your for little if anything. There in my garage taking up room.
Last edited by BLACKOUT; 11-14-2009 at 12:35 PM.
11-10-2009, 07:17 PM
#4
To the BATMOBILE!!!!!!
Thread Starter
Join Date: Aug 2005
Location: Bowie, MD
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
The modification comes with mating the pin drive off the motors to work with the adjusters off the JIC coilovers. that is the reason that I would like to move these 2 as 1 you know. that is the reason I am selling them together for so rediculously cheap. the EDFC is worth over 200 alone and the JIC's are freakin over a 1000.00 new. I just need to sell at this point I guess.
11-14-2009, 12:36 PM
#6
To the BATMOBILE!!!!!!
Thread Starter
Join Date: Aug 2005
Location: Bowie, MD
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
11-15-2009, 02:25 PM
#8
TeethNThings.com
iTrader: (10)
Join Date: Mar 2008
Location: Mere seconds behind the leader...Doh!
Posts: 1,322
Likes: 0
Received 0 Likes
on
0 Posts
Mazdaspeed Front Strut Bar=180.00
Do you mean the strut brace (in engine compartment) or sway bar?
I'm interested if it's the strut brace. Does it have the brake cylinder brace?
Do you mean the strut brace (in engine compartment) or sway bar?
I'm interested if it's the strut brace. Does it have the brake cylinder brace?
Thread
Thread Starter
Forum
Replies
Last Post