{ FS } engine bay parts, greddy turbo, exhaust, engine etc
04-03-2012, 10:05 PM
#1
Chris
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: NY
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
engine bay parts, greddy turbo, exhaust, engine etc
Nearly complete engine bay part out!!
PRICE DROPS on EVERYTHING!!!
THROW PRICES AT ME I WANT THIS ALL GONE ASAP!!!
car has been sitting for a year and a half in and out of garage keeping. car had 33xxx miles on it, very low and kept in great condition, well taken care of.
let me know what you need, take a picture of it and email it to me at cmbruno7@gmail.com
05 Automatic 4 port blown motor. engine still turns dont know the condition of the internals but i have another Housing for the motor in amazing condition looks brand new but has 20xxx miles on it. take both the shortblock and the housing for $400 + shipping OBO
05 auto transmission $375 OBO + shipping great condition
I came up with most prices off my head for what i thought they'd sell for dont know if i was under or over on some parts
oem plastic air duckt for fog light (passanger side of bumper) -$25
oem plastic grill practically brand new only used for 1000 miles - $60
oem blacked out amber side marker (1) $5?
oem stock air intake bumper runner pipe w/the cloth - $15
oem air intake box - $40
oem plastic battery cover - sold
oem plastic engine undertray - sold
oem plastic wheel liners (both) - Sold
oem upper intake manifold - $45
oem lower intake manifold - $100
starter not the upgrade, worked great never had a problem - $50
Throttle body - $50
2 red injectors - $30
2 green injectors - $30
alternater - $45
A/c compressor - $110
4 oem ignition coils - $35
oem ignition wire plugs set of 4 - $30
oil pan - $50
oem fuel pump - $65
water pump - $65 with gasket
stock radiator fans - $50
oil metering pump - $200? says brand new its over a thousand? idk just
throwing a price to get it sold OBO
oil metering pump lines - $40 for the set
omp lines to the motor - $30
omp trailer rail (protects and disguises omp lines runnign across motor) - $10
oil filler neck - $15
thermostat housing w/ thermostat - $40
motor mount arms (both) - $100
Oil filter neck - $30
i have all bolts to any part as well!!!!
MT slave cylinder $50 OBO
AT gauge cluster, perfect condition - $80
AT center consul shifter panel with carbon fiber interior trim kit applied - $50
ALL PARTS ARE OR BEST OFFER!
ALL PICTURES HERE - EVERYTHING FOR SALE IN THE PICTURES! - http://s1171.photobucket.com/albums/r544/RXsevenor8/
more to come.. throw me offers
thermostat neck
stock fuel rails
drive shaft
AT fluid lines
pulleys
power steering
fuel lines
a/c condenssor
a/c compressor
a/c unit
sensors
misc rubber lines
etc. almost everything for sale
Aftermarket parts:
I have a Greddy Turbo Kit w/ E-Manage with less than 2000miles on the full turbo kit. some pipes have discoloring but nothing wet-sand cant take care of or paint. everything in full working condition, no shaft play, turbo is in great condition!! Greddy RS flange welded on intercooler piping, BOV is included if i can locate it amongst all my parts. SOLD
B&B Cat Back Exhaust almost perfect condition - goes for $942+ shipping. im looking for $600 OBO + shipping
B&B Racing Mid Pipe perfect condition - goes for $333+ shipping. im looking for $160 + shipping
B&B parts purchased from http://www.vividracing.com/catalog/?...turers_id=23&=
PARTS I NEED!
-CLUTCH PEDAL
-MT shift **** with no gear indicator on top of ****.. preferably black/red color
- matching MT pcm and abs module
let me know what you need!!!!
PRICE DROPS on EVERYTHING!!!
THROW PRICES AT ME I WANT THIS ALL GONE ASAP!!!
car has been sitting for a year and a half in and out of garage keeping. car had 33xxx miles on it, very low and kept in great condition, well taken care of.
let me know what you need, take a picture of it and email it to me at cmbruno7@gmail.com
05 Automatic 4 port blown motor. engine still turns dont know the condition of the internals but i have another Housing for the motor in amazing condition looks brand new but has 20xxx miles on it. take both the shortblock and the housing for $400 + shipping OBO
05 auto transmission $375 OBO + shipping great condition
I came up with most prices off my head for what i thought they'd sell for dont know if i was under or over on some parts
oem plastic air duckt for fog light (passanger side of bumper) -$25
oem plastic grill practically brand new only used for 1000 miles - $60
oem blacked out amber side marker (1) $5?
oem stock air intake bumper runner pipe w/the cloth - $15
oem air intake box - $40
oem plastic battery cover - sold
oem plastic engine undertray - sold
oem plastic wheel liners (both) - Sold
oem upper intake manifold - $45
oem lower intake manifold - $100
starter not the upgrade, worked great never had a problem - $50
Throttle body - $50
2 red injectors - $30
2 green injectors - $30
alternater - $45
A/c compressor - $110
4 oem ignition coils - $35
oem ignition wire plugs set of 4 - $30
oil pan - $50
oem fuel pump - $65
water pump - $65 with gasket
stock radiator fans - $50
oil metering pump - $200? says brand new its over a thousand? idk just
throwing a price to get it sold OBO
oil metering pump lines - $40 for the set
omp lines to the motor - $30
omp trailer rail (protects and disguises omp lines runnign across motor) - $10
oil filler neck - $15
thermostat housing w/ thermostat - $40
motor mount arms (both) - $100
Oil filter neck - $30
i have all bolts to any part as well!!!!
MT slave cylinder $50 OBO
AT gauge cluster, perfect condition - $80
AT center consul shifter panel with carbon fiber interior trim kit applied - $50
ALL PARTS ARE OR BEST OFFER!
ALL PICTURES HERE - EVERYTHING FOR SALE IN THE PICTURES! - http://s1171.photobucket.com/albums/r544/RXsevenor8/
more to come.. throw me offers
thermostat neck
stock fuel rails
drive shaft
AT fluid lines
pulleys
power steering
fuel lines
a/c condenssor
a/c compressor
a/c unit
sensors
misc rubber lines
etc. almost everything for sale
Aftermarket parts:
I have a Greddy Turbo Kit w/ E-Manage with less than 2000miles on the full turbo kit. some pipes have discoloring but nothing wet-sand cant take care of or paint. everything in full working condition, no shaft play, turbo is in great condition!! Greddy RS flange welded on intercooler piping, BOV is included if i can locate it amongst all my parts. SOLD
B&B Cat Back Exhaust almost perfect condition - goes for $942+ shipping. im looking for $600 OBO + shipping
B&B Racing Mid Pipe perfect condition - goes for $333+ shipping. im looking for $160 + shipping
B&B parts purchased from http://www.vividracing.com/catalog/?...turers_id=23&=
PARTS I NEED!
-CLUTCH PEDAL
-MT shift **** with no gear indicator on top of ****.. preferably black/red color
- matching MT pcm and abs module
let me know what you need!!!!
Last edited by rxsevenor8; 04-17-2012 at 04:25 PM. Reason: price drops
04-09-2012, 02:22 PM
#3
Chris
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: NY
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
air pump sold sorry. and mid pipe picture is in the photo album, however heres the link bellow..
http://i1171.photobucket.com/albums/...-21-02_375.jpg
http://i1171.photobucket.com/albums/...-21-02_375.jpg
04-09-2012, 07:24 PM
#5
Chris
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: NY
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
i did have it bolted on the 4 port... could be or it could just been my motor... i think the motor had a cracked apex or something cause it would be fine at 15lbs of vac and then randomly it would drop to 5lbs of vac at idle and then 10-15m later it would raise back to 15lbs of boost... very strange and this is what occurred when it blew... so i think it was more of bad seals in the motor than the FI... good question tho
\
\
04-09-2012, 09:15 PM
#6
Registered
Join Date: Feb 2011
Location: Marengo, Ohio
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Will you take $2k shipped to 43334 for the Greddy kit? If so send me good pictures to aaronspeed@embarqmail.com The pictures in your post are really small and not seeing all the turbo parts. Thanks
06-05-2012, 10:30 PM
#12
Chris
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: NY
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
PM me a picture still parting out the engine bay. if your looking to arrange for the shipping of the motor or pick it up then PM me i really have no time right now to do so. need stuff gone shoot me a price
08-15-2012, 07:16 PM
#15
Registered User
Join Date: Jan 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Still got that throttle body???
that tps is working right. wont throw any codes ha.
how much with shipping to el paso tx???
what side marker do you have cuz i need the driver side.
and ill prolly take that ac compressor too if you still have it. pm me
need my 8 running!!!!
how much with shipping to el paso tx???
what side marker do you have cuz i need the driver side.
and ill prolly take that ac compressor too if you still have it. pm me
need my 8 running!!!!
08-15-2012, 08:20 PM
#16
Driver of #50 RX8
iTrader: (3)
Join Date: Apr 2010
Location: New Hampshire
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
I need a random engine compartment part... on the left side (looking into engine from the front) you have a black box for the computer. I need the front part of that box and the air vents that go with it. let me know if you have it!
Stephen
Stephen
08-17-2012, 07:13 AM
#17
FULLY SEMI AUTOMATIC
iTrader: (9)
miguel, i have an oem drv side marker in my garage. if he doesnt have the one you need shoot me a pm
