Rx-8 Tri State Club Meet : Flemington Mazda Day - Oct. 16
RX-8 TRI STATE CLUB MEET
FLEMINGTON MAZDA DAY! 204 Highway 202 Flemington NJ 08822-0487 8AM - 12PM - MEET SUBJECT TO CHANGE Meet Information Goodies: (Subject to change) Car Care Clinic Service Specials, Wheel alignment, Tire Rotation/Balance, Oil changes etc... All discounted Discounts on all Genuine Mazda and MazdaSpeed Parts Free Lunch Dent and Ding Repair at a discount. Representative from Mazda to give us a presentation, all questions answered. CHECK THE CLUB SITE FOR RECENT INFO AND UPDATES!! http://www.rx8tristateclub.com/rx8meet_oct16.asp |
I really looking forward to this event :-)
|
I am really very disapointed that I will be working that day. I hope everyone has a great deal and gets some good hook ups.
|
Btw, is the date confirmed yet??
|
Count me in!
|
options available for more zoom-zoom i think i might have to make it.
|
i 'll go, that means i get a discount on a pair of side flares, COOL!!!
|
and rear flares .
|
If i'm lucky, I'll have the MS Spoiler back from the paint shop and on by then.. along with the MS front/rear strut bars and RB suspension.. as long as UPS doesn't screw with me on the last bit
|
hry PHILODOX !!!how much is the ms strut bar??? and where did u order it from
|
Actually.. I bought it on Ebay.. here's the link to the closed auction.. I won both the front and rear..
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT |
im there count me in
and did someone say mazdaspeed discount :) |
Yeah, date is confirmed everyone, just not the time. I'll post asap once I hear alittle more info. They certainly are leaving everything to last minute it seems!
Wayne |
Sweet.. Looking forward to the final details about the meet... Guess I should start putting together my wish list for any other MS parts that I need.. I'm thinking about underbraces next....
|
Sounds good. Count me in.
Hope I get my RB exhaust delivered and installed for the ride.. but I doubt it.. -B |
sounds good...do you have to call a head to get say an oil change?
|
I'll go only if its from 11-4pm!!! i got work after than =(
|
Our main contact at flemington is ernie, I am unsure as yet if we need to make appointments before hand. I am also expecting that the meet will be morning to afternoon. Once I finally get the details - i'll post.
thanks guys Wayne |
i hope its early i just found out i have a baby shower party to attend
sat night at 7pm |
I expect it will Kel. Who wants to be working late on a saturday....you know.
Wayne |
i think i can make this meet.... i got off :)
|
I'll be there. I'd better be, its practically in my backyard (well, 10 miles away anyway).
|
Hope you guys get lots of mazdaspeed discounts!! Sadly, I won't be able to go. Have a wedding on friday, so I will be beat the next day.
Al |
yea i dont think i will be able to go. Take pics and hope everyone has fun
|
For what it's worth, I recently received a flyer from Flemington saying they're having an open house from 8-12 saturday, with free "Full Circle Inspection" (by appointment), free food, free gifts, etc.
I hope I can make it, as it's where I bought my 8... and it's all of 10 minutes away :) |
Really! Thats good to know, cause he never actually contacted me for an exact time. Dealers right - never a straight answer :) Thanks for the tip!!
Wayne |
Originally Posted by Irish_in_a_RX8
Really! Thats good to know, cause he never actually contacted me for an exact time. Dealers right - never a straight answer :) Thanks for the tip!!
I think we're being USED, lol... |
I hope to be there for my first time. I'd like to meet everyone so I can put faces to all of the names. I also would like to see what some of you have done to your cars. It's just not the same looking at pics online. Mine is still stock although I did get a few coats of Zaino on it this weekend.
|
Originally Posted by frig
I hope to be there for my first time. I'd like to meet everyone so I can put faces to all of the names. I also would like to see what some of you have done to your cars. It's just not the same looking at pics online. Mine is still stock although I did get a few coats of Zaino on it this weekend.
|
any1 have the Exact adress of the place or is that it on the 1st page ??
|
Originally Posted by Twinturbo2800
any1 have the Exact adress of the place or is that it on the 1st page ??
204 Highway 202, Flemington, NJ 08822-0487 |
So the time is confirmed from 8-12 now?
|
8 - 12 yeah, will confirm for sure Thurs/Friday. If so I will be there for 9.30am ...perhaps some might be interested in taking a trip in a group?
|
>perhaps some might be interested in taking a trip in a group?
Not a bad idea. Where are you going from? |
oof i might not be able to make it, a bit early and a long drive too.
|
I am planning to attend. Will shoot for 8AM but probably will arrive later.
|
Just spoke with Ernie everything is confirmed.
I told him that the club will shoot to arrive at 9:30am. Details: Free Full Circle Inspection on all cars. 10% Discount on all service, since they wont be able to do everyone on Sat. Call 866-583-3333 ask for either Jack or Mike to make an appointment. 10% Discount on all Genuine Mazda and MazdaSpeed Parts, some, probably most will have to be ordered in because they won't have everything in stock. Dent and Ding Guy. Free Lunch at 11:30-12:00 (you all better not show up a 11:29;)) Representative from Mazda hopefully an Rx-8 connoisseur to give us a presentation, all questions answered. |
8am makes saturday sound like a work day :( ;)
i should be there by 10am |
1.5 hours...bah ill go just for the ding removal
|
Great Job Mark. This meet will most probably be the last for decent weather outside. Looking forward to the day - I've this ding that certainly needs looked into as well!
Wayne |
I don't have to work so I plan on showing up. Should be able to make 9:30...and I hate NJ. :p
|
A group trip is always nice.. Can't beat a line of 10+ RX-8's trolling down the highway at insane speeds ;)
|
I'll meet for the ride up.
I live in NJ (mount laurel) but I can meet about anywhere. Someone pick a neutral spot and time and anyone interested can meet there/then ? -B |
I live in Yardley, and Mark ( Polak ) is in Laurenceville. I was thinking the best route to Flemington is 95N to the exit CR-579. Anyone local have anygood suggestions for a meet spot on the way?
Edit: Lawrenceville (polak) |
Anyone coming from the north? I'm planning to take Rt 287 then Rt 202 :-)
|
Originally Posted by Irish_in_a_RX8
I live in Yardley, and Mark ( Polak ) is in Laurenceville. I was thinking the best route to Flemington is 95N to the exit CR-579. Anyone local have anygood suggestions for a meet spot on the way?
Why doesn't anyone coming from south of Flemington meet at AutoTechnik (automotive tuning place) at about 9:15am its about 20mins away from the dealer and easy to find you'll see about 10 Porsche’s in a semi circle right by the entrance. http://www.autotechnik.com/ 55 Rt. 31 S. Pennington, NJ 08534 609-730-1111 EDIT : Mark your so cool, wish I had your england skill |
its actually further for me to pick up Rt31 from Yardley by an extra 15 miles. 95N might be easier for me - i'll let u know.
Thx |
Originally Posted by Irish_in_a_RX8
its actually further for me to pick up Rt31 from Yardley by an extra 15 miles. 95N might be easier for me - i'll let u know.
Thx Take 95N to the Pennington/Ewing exit then you follow pennington road around that circle taking the 3rd exit onto R31 and about 6-10miles down is AutoTechnik. http://imgi.maps.yahoo.com/overviewm...8rZO_epgYIomiz Circle: http://imgi.maps.yahoo.com/overviewm...MNhpClzL9gIl0- |
ok mark, thats sounds decent.
Anyone local agree at this meeting spot? |
Just so everyone knows it forcasts clear skies Saturday, but I doubt our cars will be clean with the current forcast today/tommorrow!
Wayne |
All times are GMT -5. The time now is 02:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands