RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   NE RX-8 Forum (https://www.rx8club.com/ne-rx-8-forum-29/)
-   -   just bought RP supercat midpipe.. where can i get it install 4 a good price? (https://www.rx8club.com/ne-rx-8-forum-29/just-bought-rp-supercat-midpipe-where-can-i-get-install-4-good-price-103108/)

JordanC 11-09-2006 11:08 PM

just bought RP supercat midpipe.. where can i get it install 4 a good price?
 
just bought RP midpipe.. where can i get it install 4 a good price?

and the estimate price is around how much? thanks yall for helping.

llzjayarzll 11-10-2006 12:29 AM

im pretty sure any muffler shop can do it for you. its pretty much bolt on too so you can do it urself. if u want it for a good price then go to some muffler shop. i think it will probably be like 40? it would probably take em 15-half an hour to install

ucleadguitar 11-10-2006 02:27 AM

y not do it urself...its an easy install...did it myself

chrism 11-10-2006 05:34 AM

shouldnt cost more than 40-50...a location of where your looking could help...you upstate or back down in the city?

416to212 11-10-2006 08:38 AM

Why don't you go over to T and R Racing in Queens. Give Tony a call and he should have you on the hoist in a few minutes. He was well priced and very meticulous. Tel: 1.718.725.0179.

BTW how much did you score the midpipe for?

JordanC 11-10-2006 01:00 PM

got it for 275. not sure if i am keeping it... i got greddy sp2 so.. it could be too loud for my taste but I have been wanting to try to see how its like to have one...

and thank you all for your help.. very appreciated ^ ^

Chrism, I am back to the city now...

I cant install em myself.. dont got the toools nor the skills. lol

Dont even know if I need to buy the $30 gasket and bolts... Do I?

please let me know.. thanks guys!

dannobre 11-10-2006 01:08 PM

You need the gasket at the manifold end...about $7 I think. You can re-use the expensive one for a long time........

416to212 11-10-2006 02:06 PM

Jordan.

So what is the plan? You planning on removing it ever year for inspection? I'm asking because I really don't know what to expect. I've only owned a car in NY for 6 months!

Oh and how do you think the midpipe would sound with the stock exhaust? Would I be killing any HP gains by keeping the stock exhaust on?

JordanC 11-10-2006 02:10 PM

i think it would sound really really good with the stock.. or the rb exhaust...

not sure about the hp gain.. but if u want gain in hp.. its gona be more of engine works..

exhaust is good for sound only... ^ ^

I think it will pass inspection... i dont think anyone has any problem with that.

416to212 11-10-2006 03:30 PM

Let me get this straight...

Replacing your Cat with the midpipe will not effect emissions testing and inpection? Am I mis-informed? The yearly inspection requires emissions right?

mysql101 11-10-2006 03:58 PM

Unless I'm mistaken, it's illegal for someone to replace the OEM emissions hardware with an aftermarket part unless the OEM part has failed. And even then some states require you to replace it with another OEM.

Jax_RX8 11-10-2006 04:02 PM


Originally Posted by 416to212
Let me get this straight...

Replacing your Cat with the midpipe will not effect emissions testing and inpection? Am I mis-informed? The yearly inspection requires emissions right?

It is not a straight through mid-pipe. it is a 3" mid-pipe with a Cat, so it will should meet most emissions tests.

Red_X8 11-10-2006 06:32 PM

With the supercat, don't let your first impressions of it ruin it for you, it will sound like shit for about 2 weeks while the pipes break in, and after that your car will sound like a racecar, and it will pop flames every once in a while to boot.

llzjayarzll 11-10-2006 06:42 PM

i have the same setup jordan c. its liveable for me. probably not for the people in the backseat though. lol i stay under 3k rpm when a non enthusiast is in the car. other wise i just crank it up!

Paul_in_DC 11-10-2006 06:59 PM


Originally Posted by mysql101
Unless I'm mistaken, it's illegal for someone to replace the OEM emissions hardware with an aftermarket part unless the OEM part has failed. And even then some states require you to replace it with another OEM.

I believe you're mistaken:


The U.S. Environmental Protection Agency's (EPA) anti-tampering enforcement policy is covered under the provisions of Mobile Source Enforcement Memorandum No. 1A. This policy states that the EPA will not consider any modification to a certified configuration to be a violation of federal law if there is a reasonable basis that emissions are not adversely affected.
So what counts is not the part, but the emissions. (But if you live in California, better double-check.)

mysql101 11-10-2006 07:18 PM


Originally Posted by Paul_in_DC
I believe you're mistaken:



So what counts is not the part, but the emissions. (But if you live in California, better double-check.)

I think it varies from state to state:

http://www.tceq.state.tx.us/implemen...tampering.html



Definition of "Tampering"

Installing a replacement part that is not the same in design and function as the part that was originally on the vehicle.

A catalytic converter may not be removed from a motor vehicle that is currently being used only for off-road driving. This is considered tampering. Tampering provisions pertain to all self-propelled motor vehicles originally designed for transporting persons or property on a street or highway.

JordanC 11-10-2006 07:29 PM

llzjayarzll ! aww man... u r making me nervous about my investment on the midpipe. lol

shitz.. hopefully i like it

llzjayarzll 11-10-2006 11:12 PM

if i were you, you should learn to do it yourself(the install), and whenever you feel like you dont want it on you can always put it back to stock.

Paul_in_DC 11-11-2006 09:25 AM


Originally Posted by mysql101
I think it varies from state to state:
http://www.tceq.state.tx.us/implemen...tampering.html

Yeah, definitely check your state laws; the exact wording can make all the difference in the world. I know in Virginia all they're concerned with is that the actual emissions meet Federal/State standards. A high-flow cat is fine as long as it passes the emissions test.

llzjayarzll 11-11-2006 10:45 AM

oh yea jordanc i forgot, if you think its too loud you can invvest in the dynomax bullet or similar applications for the pipe. im sure people have done this already

JordanC 11-12-2006 06:37 PM

ya.. i searched the forum... so dynomax bullet is like the resonator for the midpipe... but..i dont care if its loud.. just the raspy sound is what i care about.. do you think dynomax will make the exhaust system sounds deep?

and if i were to buy dynomax... does a muffler shop knows how to apply this to the midpipe? or how to weld that shit in? ehzzz... i am so lost.

Please let me know more. thanks~

llzjayarzll 11-12-2006 06:55 PM

if you do research on that and its positive, make sure you tell me so i could get it too lol.

rkostolni 11-14-2006 07:39 PM

I'm not sure where you're located, but I'll install it for you for a great price and also teach you how to do it for future reference. I'm always looking for side jobs to finance my addictions. :D:

JordanC 11-15-2006 04:05 PM

ah... but i am far away.. in the nyc.. 6 hrs drive? thanks for the offer. Maybe if i am looking into like turbo or something big... i will let you know. thanks!

7andan8 11-23-2006 09:15 AM

Interested parties waiting to hear your review Jordan. What's the result?


All times are GMT -5. The time now is 05:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands