Jack No longer has the 7... and switched to ...
#1
Jack No longer has the 7... and switched to ...
Welcome to my new slightly .. welll 179,000 mile used car!
The Green Boat! Black at night..
So the goodies it has so far...
Alpine Mono to power a 8 inch jl sub that a built a bracket for the factory location.. Sounds awesome
Alpine 4 channel to power all four Polk speakers
Alpine Double Din Screen... OH THAT"S RIGHT!!! It's MANUAL TOO!
Coming in 2010.... This is what you'd always be seeing... when it goes for engine/tranny/turbo addition overhaul..
The Green Boat! Black at night..
So the goodies it has so far...
Alpine Mono to power a 8 inch jl sub that a built a bracket for the factory location.. Sounds awesome
Alpine 4 channel to power all four Polk speakers
Alpine Double Din Screen... OH THAT"S RIGHT!!! It's MANUAL TOO!
Coming in 2010.... This is what you'd always be seeing... when it goes for engine/tranny/turbo addition overhaul..
#4
sorta... Motor is getting pulled... low compression pistons in... new H rods, new head gasket, valve train. then turbo and all that jazz.
my Ideal goal is about 800 rwhp.
Aka.. what this guy has...( a friend of a friend)
http://www.clublexus.com/forums/lexu...-only-10k.html
my Ideal goal is about 800 rwhp.
Aka.. what this guy has...( a friend of a friend)
http://www.clublexus.com/forums/lexu...-only-10k.html
#6
might be a drift car...
for now.. it's going to be a big slow just relaxing boat to drive...
Definitely 2x slower than any 8... doubleGoose pulls away like a pudgy kid pulling a wrapper off a chocolate bar..frigging fast compared to me ...
too much weight... 3700lb's curb..
for now.. it's going to be a big slow just relaxing boat to drive...
Definitely 2x slower than any 8... doubleGoose pulls away like a pudgy kid pulling a wrapper off a chocolate bar..frigging fast compared to me ...
too much weight... 3700lb's curb..
#18
Not going to fully convert to soarer...
Supras came in turbo and non turbo
2jz-gte is the turbo version..
2jz-ge is the non turbo version
All sc300's stock come with the 2jz-ge
A common swap to convert to soarer.. is go 1jz-gte.
that's a turbo motor..
But I think I'm going to join the NA-T Sc300's and Supras...
Turbo a NA motor
Supras came in turbo and non turbo
2jz-gte is the turbo version..
2jz-ge is the non turbo version
All sc300's stock come with the 2jz-ge
A common swap to convert to soarer.. is go 1jz-gte.
that's a turbo motor..
But I think I'm going to join the NA-T Sc300's and Supras...
Turbo a NA motor
#19
So some of you guys might know... but started to mod the poop out of this luxury mobile..
Oh and Ted is moving in next door...
Air ride system, Wheels are getting refinished, and Body kit is going on.
Air ride went on and is about 70% complete.
Oh and Ted is moving in next door...
Air ride system, Wheels are getting refinished, and Body kit is going on.
Air ride went on and is about 70% complete.
#24
$2500-5000
from importers
Almost all of them.. are supposedly from a low mileage car.. blah blah blah
and supposedly comes complete..
(I went through a couple swaps... always missing crap.. or something awful, like dented in oil pan, or random thing snapped and who really knows how much mileage is on it?
or the engine harness has a part cut )
But big daddy motor is usually worth it if you have over 5k to throw at it..
and he needs a tranny to match it.
I'm running into this problem.. so my high hp number might be out of reach for now.
I think just check compression.. if good.. throw a Head gasket on.. head studs.. and turbo the motor to like 10-15 psi instead for about 1800.
from importers
Almost all of them.. are supposedly from a low mileage car.. blah blah blah
and supposedly comes complete..
(I went through a couple swaps... always missing crap.. or something awful, like dented in oil pan, or random thing snapped and who really knows how much mileage is on it?
or the engine harness has a part cut )
But big daddy motor is usually worth it if you have over 5k to throw at it..
and he needs a tranny to match it.
I'm running into this problem.. so my high hp number might be out of reach for now.
I think just check compression.. if good.. throw a Head gasket on.. head studs.. and turbo the motor to like 10-15 psi instead for about 1800.
#25
So... Here are alot of the updated pictures..
Rims are powdercoated...
kit is on... air ride is in..
Snug Fit for the rear... all the way down..
Front that's a shallow socket.. ( Cig box doesn't fit..)
Rims are powdercoated...
kit is on... air ride is in..
Snug Fit for the rear... all the way down..
Front that's a shallow socket.. ( Cig box doesn't fit..)