Notices

jpav123

Registered User

About Me

  • About jpav123
    Location
    Louisville, KY/Tampa, FL

Statistics

Total Posts
Albums
Visitor Messages
Total Likes
General Information
  • Last Activity: 04-22-2012 09:39 AM
  • Join Date: 04-13-2004

Friends

Showing Friends 1 to 2 of 2

Visitor Messages

Showing Visitor Messages 1 to 9 of 9
  1. jpav123
    12-30-2011 11:27 PM - permalink
    Powder coat. I have the other one, but I can't remember the name off the top of my head.
  2. Sebringman88
    10-07-2011 03:03 PM - permalink
    Hey,

    We basically have the same car. Did you powder coat your rims or paint them? What type of exotic speed exhaust do you have? I have the RT-1. Super loud but very nice along with a Racing beat intake and duct.
  3. jpav123
    07-01-2010 08:36 PM - permalink
    I had a shop do it for me, so I can't tell you.
  4. RotaryMachineRx
    07-01-2010 08:01 PM - permalink
    Hey when you preloaded the front springs did you do the drive around the block thing or did you just use a jack to compress the springs and tighten everything up? Mine seem like they are the exact same hieght as stock but I used a jack to preload and I still am installing the rears ATM
  5. jpav123
    06-05-2010 10:32 PM - permalink
    I actually don't have the springs on the rear. I left the stock springs on the rear because of the stereo box weight.
  6. RotaryMachineRx
    06-05-2010 04:57 PM - permalink
    Did you Pre-load the rear springs after you installed them on the car? I've seen a few ppls pics that seem like the rear end is alot higher than yours, maybe even higher than stock...
  7. jpav123
    05-26-2010 05:45 PM - permalink
    RotaryMachineRx,
    I use a scissor jack, so I can't tell you for sure. It will be a tight fit with a 2 ton jack.
  8. RotaryMachineRx
    05-26-2010 04:34 PM - permalink
    What's it like trying to get a Jack under the car with the S-Tech's? Can you still fit a standard 2 ton garage jack under it?
  9. Youwonder
    04-06-2010 08:11 PM - permalink
    I donno what brand I brought it off as a package deal. fitment is real good for a replica but around the side markers there's a little gap.. But I give it 85% it was easy to put on

All times are GMT -5. The time now is 06:37 PM.