Microtech Dash Display
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Tampa FL
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Microtech Dash Display
Microtech Dash Display
$425.00
Mazsport offers this dash display for the RX-8. It is compatible with the Interceptor-X and can be used with NA or turbo applications.
FEATURES
Easy to read display
User definable shift lights which illuminate in 250RPM increments and at redline will display "shift gears"
User definable water temp, boost, and air temp warning lamps. Default screen displays actual engine water temps under vaccuum and then automatically switch's to a digital boost guage under boost.
Allows the built in Interceptor-X Ignition lockout with user definable PIN number. Simply turn the ignition on and enter your PIN, failure to do so will prevent the engine from being started. This is great for leaving your vehicle at the airport for added safety.
Quick set up for temporary revcut or manifold pressure ignition cut for Valet purposes.
Allows the owner of the Interceptor-X equipped vehicle quick and easy access to all laptop or interface adapotor.
Well built aluminum case with mounting bracket . Mometary button allows to toggling between screens without actually touching the display. Lights illuminate 2 yellow (warning) and 2 red (Caution)
Mazsport recommends this to all of our RX7 and RX8 owners This can be used as an addition to the RX8 for those of you who have the Interceptor-X! I have the Interceptor-X with my non turbo RX8. This would be a great way to have more control over my 8 without having to plug in the laptop. This unit can easily be mounted almost anywhere in your 8....Keep in mind that these are shipped in from Microtech in Australia. We have them in stock currently.
TO BUY
http://mazsport.net/store//product130.html
$425.00
Mazsport offers this dash display for the RX-8. It is compatible with the Interceptor-X and can be used with NA or turbo applications.
FEATURES
Easy to read display
User definable shift lights which illuminate in 250RPM increments and at redline will display "shift gears"
User definable water temp, boost, and air temp warning lamps. Default screen displays actual engine water temps under vaccuum and then automatically switch's to a digital boost guage under boost.
Allows the built in Interceptor-X Ignition lockout with user definable PIN number. Simply turn the ignition on and enter your PIN, failure to do so will prevent the engine from being started. This is great for leaving your vehicle at the airport for added safety.
Quick set up for temporary revcut or manifold pressure ignition cut for Valet purposes.
Allows the owner of the Interceptor-X equipped vehicle quick and easy access to all laptop or interface adapotor.
Well built aluminum case with mounting bracket . Mometary button allows to toggling between screens without actually touching the display. Lights illuminate 2 yellow (warning) and 2 red (Caution)
Mazsport recommends this to all of our RX7 and RX8 owners This can be used as an addition to the RX8 for those of you who have the Interceptor-X! I have the Interceptor-X with my non turbo RX8. This would be a great way to have more control over my 8 without having to plug in the laptop. This unit can easily be mounted almost anywhere in your 8....Keep in mind that these are shipped in from Microtech in Australia. We have them in stock currently.
TO BUY
http://mazsport.net/store//product130.html
Last edited by mazsportmantis; 10-31-2007 at 09:57 AM.
#3
Registered User
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
Basically, could one get away with this instead of gauges? Especially if you can tell it to issue warnings for past certain boost levels, or water temp, etc...
#5
I wanna rock! Rock!
Join Date: Jun 2005
Location: Monterey, CA
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
I didn't realize you could use it to change maps until I read the ebay listing. You should add that part to this post! Before I went to ebay I didn't think it was a big deal.
Do you have any pics or video of this thing in action? In the mean time I'm going to research it more. It sounds like a good idea to me if it can replace my boost gauge and laptop (still in search of good gauge pod solution).
edit: I found 2 pics online of it turned on.
2 more questions, the description says it does max/min datalogging? Can you expand on that? Does it accept AFR input from your WBO2 via the Int-x? Thanks
Do you have any pics or video of this thing in action? In the mean time I'm going to research it more. It sounds like a good idea to me if it can replace my boost gauge and laptop (still in search of good gauge pod solution).
edit: I found 2 pics online of it turned on.
2 more questions, the description says it does max/min datalogging? Can you expand on that? Does it accept AFR input from your WBO2 via the Int-x? Thanks
Last edited by mikeschaefer; 12-12-2006 at 06:43 PM.
#9
Riot Controller
Join Date: Jan 2004
Location: Orlando, FL
Posts: 2,142
Likes: 0
Received 0 Likes
on
0 Posts
Looks like it might be a tad too big, but that only means I'd get to repackage it and make it even more integrated into the car (first mod: red LCD backlighting)
My ashtray went the way of: "That needs to become a gauge pod" except that I hacked it all up and never finished the project...it's a bad place for critical gauges anyway. I have another project in mind that will allow me to place two gauges in a better spot but not on the A pillar or in the NAV area
My ashtray went the way of: "That needs to become a gauge pod" except that I hacked it all up and never finished the project...it's a bad place for critical gauges anyway. I have another project in mind that will allow me to place two gauges in a better spot but not on the A pillar or in the NAV area
#11
Mazsport.net
Join Date: Mar 2005
Location: In the shop
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sammytcl
do u have the new 4-line dash display? is it available yet?
#12
Originally Posted by epitrochoid
Looks like it might be a tad too big, but that only means I'd get to repackage it and make it even more integrated into the car (first mod: red LCD backlighting)
My ashtray went the way of: "That needs to become a gauge pod" except that I hacked it all up and never finished the project...it's a bad place for critical gauges anyway. I have another project in mind that will allow me to place two gauges in a better spot but not on the A pillar or in the NAV area
My ashtray went the way of: "That needs to become a gauge pod" except that I hacked it all up and never finished the project...it's a bad place for critical gauges anyway. I have another project in mind that will allow me to place two gauges in a better spot but not on the A pillar or in the NAV area
#15
Registered User
Thread Starter
Join Date: Sep 2006
Location: Tampa FL
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
it does look lovely in the FDs that come into the shop.....this is definately on my list of things to add for my 8. i have the NA interceptor and the cooling fan kit. This would be a great way for me to have control without having to worry about a lap top all of the time.
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM