RB Revi Intakes
Cones need lovin' too!
Joined: Aug 2003
Posts: 649
Likes: 0
From: Beavercreek, Ohio
Fortunately for me I'm versed in elementary education and therefore interpreting the instructions will be no problem whatsoever. I do believe my preschool experience with blocks and other shapes should also be very handy in the actual process of installing a bolt on air intake.
Now I just need to get it. I wish I knew they'd ship this late so I could have gotten the 2 day treatment... alas.
Thew, what is the status on the Hymee exhaust shipment you were due to receive at the end of June? Has it arrived?
Now I just need to get it. I wish I knew they'd ship this late so I could have gotten the 2 day treatment... alas.
Thew, what is the status on the Hymee exhaust shipment you were due to receive at the end of June? Has it arrived?
Registered User
Joined: Sep 2003
Posts: 131
Likes: 0
From: Riverside, CA
I put mine in last night. It took about 3.5 hours (along with the RB A/C and OIL screens). No pics though.
Anybody with half a brain should be able to do this themselves.
Those of you that want to pay somebody, just bring it to SO CAL and I'll do it for 1 bill. :D
I was a little intemidated at first, but when those little plastice screws came off it brought back old memories of taking my 68 impala apart.
I read a thread that talked about protecting the lights. I thought that I did, but the part to watch out for is the lower inside portion near the front point edge. I covered the upper portion and didn't notice the lower until it was too late.
Make a mental note to reattach the driving lights. I had to be hudini to get those plugged in because I went ahead and screw the bottom portion on and didn't realize it until I was done doing this and the side lights.
Good piece, good instructions from RB, and sounds great.
Bill
Anybody with half a brain should be able to do this themselves.
Those of you that want to pay somebody, just bring it to SO CAL and I'll do it for 1 bill. :D
I was a little intemidated at first, but when those little plastice screws came off it brought back old memories of taking my 68 impala apart.
I read a thread that talked about protecting the lights. I thought that I did, but the part to watch out for is the lower inside portion near the front point edge. I covered the upper portion and didn't notice the lower until it was too late.
Make a mental note to reattach the driving lights. I had to be hudini to get those plugged in because I went ahead and screw the bottom portion on and didn't realize it until I was done doing this and the side lights.
Good piece, good instructions from RB, and sounds great.
Bill
Thread Starter
Thews8
Joined: Apr 2004
Posts: 2,535
Likes: 11
From: Oregon South Coast
soin the end no damge right? you did not break a Clear corner did you ?
and yes.. what a nice intake.. Great Work RB.. !
and yes.. what a nice intake.. Great Work RB.. !
Originally Posted by maxrx8
I put mine in last night. It took about 3.5 hours (along with the RB A/C and OIL screens). No pics though.
Anybody with half a brain should be able to do this themselves.
Those of you that want to pay somebody, just bring it to SO CAL and I'll do it for 1 bill. :D
I was a little intemidated at first, but when those little plastice screws came off it brought back old memories of taking my 68 impala apart.
I read a thread that talked about protecting the lights. I thought that I did, but the part to watch out for is the lower inside portion near the front point edge. I covered the upper portion and didn't notice the lower until it was too late.
Make a mental note to reattach the driving lights. I had to be hudini to get those plugged in because I went ahead and screw the bottom portion on and didn't realize it until I was done doing this and the side lights.
Good piece, good instructions from RB, and sounds great.
Bill
Anybody with half a brain should be able to do this themselves.
Those of you that want to pay somebody, just bring it to SO CAL and I'll do it for 1 bill. :D
I was a little intemidated at first, but when those little plastice screws came off it brought back old memories of taking my 68 impala apart.
I read a thread that talked about protecting the lights. I thought that I did, but the part to watch out for is the lower inside portion near the front point edge. I covered the upper portion and didn't notice the lower until it was too late.
Make a mental note to reattach the driving lights. I had to be hudini to get those plugged in because I went ahead and screw the bottom portion on and didn't realize it until I was done doing this and the side lights.
Good piece, good instructions from RB, and sounds great.
Bill
Last edited by thew; Jul 3, 2005 at 05:39 AM.
Thread Starter
Thews8
Joined: Apr 2004
Posts: 2,535
Likes: 11
From: Oregon South Coast
i stillhave a few more.. left. I will be happy to honer the Grp pirce untill all of them are gone. I think i have 3 that ended up not being spoken for..
Hymee Exhaust are still not all buit yet,. but i do expect them very very soon.
Hymee Exhaust are still not all buit yet,. but i do expect them very very soon.
Originally Posted by ranger4277
Fortunately for me I'm versed in elementary education and therefore interpreting the instructions will be no problem whatsoever. I do believe my preschool experience with blocks and other shapes should also be very handy in the actual process of installing a bolt on air intake.
Now I just need to get it. I wish I knew they'd ship this late so I could have gotten the 2 day treatment... alas.
Thew, what is the status on the Hymee exhaust shipment you were due to receive at the end of June? Has it arrived?
Now I just need to get it. I wish I knew they'd ship this late so I could have gotten the 2 day treatment... alas.
Thew, what is the status on the Hymee exhaust shipment you were due to receive at the end of June? Has it arrived?
Thread Starter
Thews8
Joined: Apr 2004
Posts: 2,535
Likes: 11
From: Oregon South Coast
you got it.. i love mine insteed it over the week end..
And to think some people did not belive me
...
Oh well.. Since the Grp buy kinda fell apart i still have 2 more intakes i can sell at the price above.. but only to Rx8 club members.
And to think some people did not belive me
... Oh well.. Since the Grp buy kinda fell apart i still have 2 more intakes i can sell at the price above.. but only to Rx8 club members.
Thread Starter
Thews8
Joined: Apr 2004
Posts: 2,535
Likes: 11
From: Oregon South Coast
i wounder why you did not get yours on Friday ?
it just went from City of industry to you house ..
UPS took a lunch break i guess
.
it just went from City of industry to you house ..
UPS took a lunch break i guess
.
Originally Posted by wokuku
Just received them today. Hehe thanks =)
Thread Starter
Thews8
Joined: Apr 2004
Posts: 2,535
Likes: 11
From: Oregon South Coast
Thread
Thread Starter
Forum
Replies
Last Post
