so go with stock? dont really want to get them from around here.... NP is hella expensive, wanted to charge me $35 for a can of BG44K that i can get elsewhere for 20

 

By stock I mean any API GL-4 or GL-5 75W-90. No need for any fancy stuff like syncromesh or anything like that. I wonder what brand the dealer uses?

 

I'm down to check it out tomorrow after
work since I get off at 6

 

Office closes at 6 so we are good after that. All new comers are welcome as long as you don't act a fool. I don't wanna cap a fool!

 

were is the office

 

4257 NW Loop 410
San Antonio, Texas 78229

I would say about 6:30 would be good.

Who is all coming?

 

me...im still installing my new speakers

 

well i got my speakers installed today...
does anyone know how to seafoam this car

 

dont seafoam.... just go get a can of BG44K and put it in when you fill up

 

I should be there tonight btw..... 9k send me a text to remind me lol

 

Hoss is gonna be there too. I'm sure there is a DIY somewhere on the Seafoam, it can't be that hard though.

 

"I used the Seafoam, The method is the same with a couple of exceptions. There is no need to pump it into the intake nipples
1. Pour 2oz of Seafoam into a cup
2. Attached flexible tube to nipple (not yours, the car's!)
3. Other end of the hose in cup
4. follow all the other steps


The intake creates enough vacuum to pull the Seafoam out of the cup. Just "start" the car 10 seconds at a time. I found after the 10 seconds the cup would not be completely empty but the vacuum would continue until the cup was finished
"

**edit**

 

So since Scott drank all our leftover beer from last time, who's bringing some this time?

 

i think you just volunteered lol

 

But I bought it last install meet

 

well im under 21 so yea

 

Yeah no underage drinking! But we do have a vending machine

 

did i say i was under 21 i meant to say im 24yrs old

 

 

just picked up a can of ZOOM POWER!!!!!!!!!! might do this tonight

 

 

These last few minutes of work are dragging by so slooooow

 

Hey thanks for coming by Hoss, TBK, Grungepup, and VS8. BHR install went smooth as could be. I still haven't hit the 1,000 mile mark so I can't get on it but as soon as I do, I'm doing a oil switch to 0W30 or 0W40 and hitting the dyno.

I want a get a good baseline on my car to see where I'm at that way when I get the AP I can see what power can be made.

Thanks again guys!!! Can't wait for the next one as soon as my rear rotors come in and my Lebren Dually and dipsticks lights.

 

 

Coils are working great!!!. I'm almost to 1,000 miles and then its oil change time and 9krpm time!! I can definitely feel the power in my butt dyno up to 5-6k. I hope my dyno numbers do not depress me.