OFFICIAL: Powertrix Coilover Group Buy is OPEN!
3 Attachment(s)
*Mods - This GB has been fully paid for. Please PM me if there are any issues!*
Confirmed: 1. Gr8Bullet Race PAID IN FULL 2. NautyOne Race (10k/7k) PAID IN FULL 3. MMeglen Race PAID IN FULL 4. shadycrew31 Race PAID IN FULL 5. Arca_ex Race (10k/7k)PAID IN FULL 6. ooobigfire Race PAID IN FULL 7. dlum125 Race PAID IN FULL 8. ShellDude Race PAID IN FULL 9. Chadwisk Race PAID IN FULL 10. J's_sbm8 Race (10k/7k) PAID IN FULL 11. moonkid Race PAID IN FULL 12. I'll give some general info, followed by payment details via Powertrix. Please see the GB feeler thread for further info -> https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/gauging-interest-powertrix-coilovers-group-buy-212613/ Please, feel free to PM or post any questions regarding these coilovers/group buy details! (SE3P) RACE COILOVERS - Normal Retail: $1265.00 Special Group Buy Pricing: $985.00 The Race Coilovers feature a robust Race grade 45mm mono tube strut piston that is valved for the serious competitor and features aluminum pillow ball upper mounts to transfer more suspension energy through the strut piston shaft increasing the efficiency of the overall suspension duty. Full forged steel threaded shock bodies for independent ride height and spring preload adjustability and 9k/6k liner springs make the Race Coilover System an "All Business" tool for Auto crossing and Road Racing. Designed for the true performance enthusiast looking for the extra edge during track time, it is also just civil enough to run on the street on a daily basis. (SE3P) ULTRA-LITE COILOVERS - Normal Retail: $1499.00 Not currently available with this GB The Ultra-lite Race Coilovers are the ultimate in all around performance and handling. It also features the aluminum pillow ball upper mounts and independent ride height and spring preload adjustability. For the serious Motorsports competitor, the Ultra-lite version shares all the same features of the Race version but incorporates aluminum strut housings for an approximate 10% decrease in weight making them the competitor’s choice for those watching un-sprung weight. We have used these coilovers for dual duty, Drag and Autocross setups with great Success. With all the adjustment and spring options, it is possible to set up the vehicle to meet all situations and scenarios. Thought the strut housing is aluminum to save weight, the POWERTRIX Ultra-lite coilovers use heat tempers forged steel for bottom mounting cups (where other companies use aluminum) for maximum strength where is it needed the most at the point of where the coilover assembly bolts to the hub of the car. Details/Features: -Independent Ride height and Spring Preload adjustability -9kg/mm - 200mm Front Springs and 6kg/mm - 200mm Rear Springs (springs rates available between 3kg/mm-17kg/mm) -15 way strut damper adjustments -Rear extensions/knobs for easy adjustability -Rear top mounts included -Aluminum pillow-ball upper mount -Race Grade 45mm strut piston -Re-buildable/Replaceable Premium mono-tube forged steel strut body (Race Version ONLY) -Re-buildable/Replaceable Premium mono-tube aluminum strut body (Ultra-Lite Version ONLY) -Spring rates and lengths are customizable if desired. Any difference greater than 2k of the factory settings will require re-valving of the dampers at an additional charge. -Excellent service that Powertrix has become known for in the Z world! Pictures! These were the first set of Powertrix Race coilovers produced for the SE3P platform. We determined the top collars on the front coilovers were absolutely unnecessary, so future coilovers will NOT have this feature. My current ride height running Powertrix Race coilovers - NO spring droop! https://farm6.static.flickr.com/5036...963233f8_z.jpg All four lined up! (NOTE: Will NOT include the very top collar seen on fronts - this was deemed unnecessary) http://img.photobucket.com/albums/v6...ode43/all4.jpg Front coilover -> preload + ride height independent adjustment (NOTE: Will NOT include the very top collar seen on fronts - this was deemed unnecessary): http://img.photobucket.com/albums/v6...43/front-5.jpg Rear Coilover -> preload + ride height independent adjustment: Attachment 243768 Rear Adjustability Detail: Attachment 243769 More Rear Adjustability Detail: Attachment 243770 IMPORTANT: PM me when payment is completed! If you have not already, please PM me your Full Name + Email address. If you have already sent me this info, simply let me know you have completed payment - I will make assure this GB goes 100% smoothly. Thanks! POWERTRIX (SE3P) RACE COILOVERS Group Buy Deposit $985.00 + $49.00 shipping = $1034.00 ($517.00 Deposit) Group Buy is currently CLOSED. PM me for details on current stock, pricing, etc. POWERTRIX (SE3P) ULTRA-LITE COILOVERS Group Buy Deposit $1199.00 + $49.00 shipping = $1248.00 ($624.00 Deposit) ULTRA-LITES NO LONGER AVAILABLE WITH THIS GB ****POWERTRIX (SE3P) RACE COILOVERS**** GROUP BUY PRICE $985.00 + $49.00 shipping = $1034.00 TO PAY IN FULL Group Buy is currently CLOSED. PM me for details on current stock, pricing, etc. ****POWERTRIX (SE3P) ULTRA LITE RACE COILOVERS**** GROUP BUY PRICE $1199.00 + $49.00 shipping = $1248.00 TO PAY IN FULL ULTRA-LITES NO LONGER AVAILABLE WITH THIS GB ***TIME FRAME*** All time frames are ESTIMATED at this time and can vary from 1-2 weeks depending on Production, Shipping, Importation, and US Customs Production time is approximately 4-6 weeks. Shipment to Powertrix for distribution is approximately 14 days. Estimated time frame is as follows: June 13th - Start of the Group Buy June 13th – June 20th - Group Buy Pre Ordering and Reservation June 20th- LAST DAY FOR ORDERING AND RESERVATION – Group Buy ends and Production begins (Tentative) July 1st - Deadline to pay deposit to secure Group Buy spot and pricing 6-8 weeks – Production Finished 1 1/2-2 weeks after production - Estimated arrival at Powertrix for Distribution BALANCE DUE for all coilovers. All Paid in full orders will ship out immediately after receiving the shipment. 3-5 days delivery from POWERTRIX to you depending on location. Estimated delivery to buyers – Early – Mid August. ALL DEPOSITS are NON REFUNDABLE. If for any reason you are unable continue with the Group Buy, you can either sell your spot to another potential Buyer or we will give you store credit towards any other Powertrix Products in the full amount of the deposit or payment submitted. By submitting either full payment or deposit constitutes that you understand, acknowledge, and adhere by the above group buy details and time frame. edit: Here's an easier to read tentative timeline for you guys: -July 1st: Deadline to pay deposit to secure GB spot + pricing -Early August: Balance due when coilovers arrive at Powertrix HQ some time around the beginning of August. I'll keep everyone updated on the status of this ETA. -Early-Mid August: Coilovers scheduled to be received by GB participants |
Forgot to mention - because there was a few day lag in getting the payment links (they ended up being filtered into another folder actually!) I believe the GB pricing may be available for a bit longer than 6/20.
Anyways, let me know if you have any questions everyone! :wavey: |
Will be putting in my deposit this Friday after I receive my paycheck. We have until early August to complete our remaining balance if we only paid a deposit, correct?
|
^correct your order will be made and shipped to powertrix and until payment is complete it then go from powertrix to your doorstep...
|
BOOM! PM'd
|
PM sent.
|
Fudge :(
no moniez GL w/GB |
What happens if not enough people put in a deposit? Will the price change, will production be delayed or will the production be canceled and money refunded?
|
Production will not be delayed or cancelled. At this point, Powertrix is bringing over a certain number of coilovers. If not all are pre-ordered, then they will be offered at normal retail. If more than this number are pre-ordered, then additional sets will be produced.
Thanks Highway, that is a good point I failed to mention :beerchug: Atilla - Thanks for the support! Spread the word on these coils guys! Once you receive them and post up pictures, I'm pretty sure they will be the next go-to option when it comes to coilovers! Sadly, anyone who wants them after will need to pay full retail :lol: |
And now I wait.... damn I'm impatient
|
It will be worth it! :D:
|
So what's the advantage or reasoning behind going with a 10k/7k setup? I was considering it but wasn't sure about what effects it would have as far as track duty as well as daily drivability.
|
In general, stiffer spring rates will allow for less body roll, slightly crisper steering response, etc. The downside would be a less compliant ride.
The 9k/6K are a good choice from the factory IMHO. This is the perfect balance between comfort and stiffness. Personally, I'm fine with dealing with a bit more rigidity in daily driving so I went with the slightly stiffer rates, just as NautyOne. edit: Fixed the "Pay in full" link for the Race coilovers. Sorry for the extra "h" in "http"! |
I see. I definitely don't mind a little bit stiffer ride as the roads here in AZ are all awesome. I'm going to go ahead with a 10k/7k setup. Sending a PM as well.
|
Does powertrix have any racing heritage?
|
+1 about 9k/6k spring rates being a good choice. 8k/5K would be plenty good too which is what my KW v3's come with. Comfortable but firm/chrisp on the street. Stiffen the struts and they preform great on the track but going to 9k/6k is needed when you push the car with wide and super grippy tires.
Honestly 99% of people wont notice the performance difference between 8k/5K and 10k/7K. If you have a street car with light track and spirited driving, I wouldnt go stiffer then 8k/5k. |
Originally Posted by NYC Drift King
(Post 4006552)
Does powertrix have any racing heritage?
Powertrix supports all sorts of track events and the participating drivers. Just as an example, Powertrix will be present at the upcoming SoCal All-Star Bash drift event the 4th of July weekend, supporting the drivers throughout. As another close-to-community aspect, instructional videos and excellent feedback are offered to help customers out whenever needed. With affiliates such as Greddy, Brembo, HKS, Volk, A'PEXi, etc., it is clear Powertrix means business. :icon_tup: |
I have a few questions. They might be hard to answer but would appreciate any info.
1. What service interval does Powertrix recommend? 2. How much does it cost to get the shocks serviced? (ie. cost of rebuild and cost of revalve) 3. Are they located in San Diego? Is that where we can send the shocks to be serviced? What is the expected turn around time? 4. In the standard settings what is the full range of height adjustment (how high does it go? Can it reach stock height or does it have a drop of at least 1"?) Thanks. |
Tilt, deposit paid just now. You have a PM as well.
|
Lodes, sorry for the slow reply. I'm trying t get the answers to all of your questions so I can address your post entirely.
MMeglen - I'll update OP soon. Thanks! |
Originally Posted by Lodes
(Post 4007046)
I have a few questions. They might be hard to answer but would appreciate any info.
1. What service interval does Powertrix recommend? 2. How much does it cost to get the shocks serviced? (ie. cost of rebuild and cost of revalve) 3. Are they located in San Diego? Is that where we can send the shocks to be serviced? What is the expected turn around time? 4. In the standard settings what is the full range of height adjustment (how high does it go? Can it reach stock height or does it have a drop of at least 1"?) Thanks. |
deposit sent!
|
Originally Posted by dlum125
(Post 4008140)
if you could answer these questions in this thread, that'd be awesome.
Updating OP right now. Thanks everyone! |
Hating my life right now..tires or coilovers :(. Gots me some new rubber
|
2 Attachment(s)
Originally Posted by Lodes
(Post 4007046)
I have a few questions. They might be hard to answer but would appreciate any info.
1. What service interval does Powertrix recommend? 2. How much does it cost to get the shocks serviced? (ie. cost of rebuild and cost of revalve) 3. Are they located in San Diego? Is that where we can send the shocks to be serviced? What is the expected turn around time? 4. In the standard settings what is the full range of height adjustment (how high does it go? Can it reach stock height or does it have a drop of at least 1"?) Thanks. 1. What service interval does Powertrix recommend? In the 9-10 years we have been producting coilovers, we have yet to sell a set of dampers/struts due to them being blow or wearing out. We actually have the original 3 sets prototype coilovers done in 2001 still in use on daily driven 300zxs that see drag, drift, autocross and road course duty. 2. How much does it cost to get the shocks serviced? (ie. cost of rebuild and cost of revalve) We sell new dampers/struts and the range between $110.00 - $149.00 per strut. Revalving is not required unless a change in spring rate of more than + or – 2k is made. 3. Are they located in San Diego? Is that where we can send the shocks to be serviced? What is the expected turnaround time? We, POWERTRIX, are located in San Diego CA. Cost wise, if in more effective to send completely new dampers/struts instead of reusing the customers old cartridges. Turnaround time can vary depending on when parts are ordered, if they are readily available from manufacturing, and when it may coincide with regular production orders as manufacturing takes place overseas. 4. In the standard settings what is the full range of height adjustment (how high does it go? Can it reach stock height or does it have a drop of at least 1"?) Ride height can be adjusted all the way from stock to as low as you'd like. With regards to racing heritige, here is some further info: POWERTRIX COILOVERS NOTABLE ACHEIVEMENTS: 2004-2010: 12 time RaceLegal Modified Street Champion / Ultra-lite Coilover equipped Powertrix Z32 -April 2008 and 2009: Powertrix Ultra-lite and SS coilover equipped 300zx 1st and 2nd quickest times for all Z32s at Motorsport Auto’s West Coast Z Nationals SCCA Autocross Event -April 2007: Powertrix Race and SS coilover equipped 300zx 1st and 2nd quickest times for all Z32s at Motorsport Auto’s West Coast Z Nationals SCCA Autocross Event -April 2006: Powertrix coilover Ultra-lite, Race and SS equipped 300zxs take 1st, 2nd, and 3rd quickest times for all Z32s at Motorsport Auto’s West Coast Z Nationals SCCA Autocross Event. -January 2006: THE Powertrix Ultra-lite Coilover equipped Z32 sets world record ET ¼ mile pass for quickest stock motor, stock turbo Z at 10.95@125.01 mph at Fontana’s California Speedway. - April 2004 and 2005: POWERTRIX Ultra-lite and Race Coilover equipped 300zxs take 1st and 2nd quickest times for all Z32s at Motorsport Auto’s West Coast Z Nationals SCCA Autocross Event. Attachment 243614 Attachment 243615 Today is the last day to lock in custom rates everyone! Lastly, here are a few pictures of my car, rocking the Powertrix coilovers. More shots can be seen in the thread here -> https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/red-volk-racing-re30s-218488/ or on my flickr here -> www.flickr.com/photos/inghostcolours https://farm6.static.flickr.com/5265...ec468795_b.jpg https://farm3.static.flickr.com/2659...2c16670c_b.jpg https://farm3.static.flickr.com/2506...7fd96db0_b.jpg https://farm6.static.flickr.com/5155...d6b10b98_b.jpg |
Original Post UPDATED!
Think we can get two more? Not necessary, but 10 would be ideal :icon_tup: |
would you mind remind all of us 'deposit only' guys like a week or two in advance to pay the rest? that would be awesome.
|
Pm sent!
|
OP Updated! For those of you considering these coilovers, time is running out to lock in GB pricing! After GB is over, these will be priced at standard retail!
|
Last day!!!
|
If anybody wants to buy out my spot, please PM me. I am going to buy a dedicated track car and do not need the coil-overs anymore.
@tiltmode43: I will proceed even if nobody buys my spot. |
Lodes - Ah, tough break! When people start receiving these + installing + posting pics, I think interest will raise at which time you should be able to get nearly all of your money back, if not every penny if you decide to sell.
|
Forgot to mention - GB is technically closed! Please PM me if interested and Lodes has already sold his spot and I may be able to get in an extra GB participant or two :)
|
I want to get in on this... wish I would've seen it sooner.
|
Originally Posted by ShellDude
(Post 4028587)
I want to get in on this... wish I would've seen it sooner.
Originally Posted by Lodes
(Post 4028009)
If anybody wants to buy out my spot, please PM me. I am going to buy a dedicated track car and do not need the coil-overs anymore.
@tiltmode43: I will proceed even if nobody buys my spot. You could try shooting off a PM to Lodes then. |
Originally Posted by Arca_ex
(Post 4029452)
You could try shooting off a PM to Lodes then.
|
Thanks Lodes / tilt / Powertrix for getting me in. Now the hard part ... waiting with everyone :) :) :)
|
Yup its the wait that sucks! Been looking at a lot of wheels lately to get an aggressive stance with the coilovers. Only wheels I seem to like cost 3x more than the coilovers though :scared:
|
The moment is getting closer, the wait will be worth it!
For anyone interested, I have a verified spot or two still left at GB pricing. Please PM for details! |
when are the final payments due ???
|
Did this group buy close already? I was just about to buy a set of megans but think these look better.
|
Originally Posted by J's_sbm8
(Post 4034475)
Did this group buy close already? I was just about to buy a set of megans but think these look better.
|
Dlum - I'll see if an updated ETA is available at the moment.
Yes, a few spots still open but I have some people interested that have been PMing so not sure how long they will last. I will keep everything updated though to assure whoever wants a set can get in on the GB pricing while still available. Also, will update OP to reflect change from Lodes to Shell :icon_tup: |
praying that these come before mazfest!!
|
Originally Posted by dlum125
(Post 4034943)
praying that these come before mazfest!!
Right now, the ETA is looking to be around mid August, *possibly* late August. I don't have a concrete date just quite yet, but due to factory load and shipping details, some of the factors can be difficult to judge and impossible to control. They may come in time, I just don't want to make any uncertain promises. I'll keep you guys updated though! In the end, I can promise it will be worth it :icon_tup: |
Noooo! More waiting?! Damn that gives me more time to think about blowing more money on wheels.
|
Not necessarily. Realistically, the ETA just shifted from "early-mid August" to "mid-late August."
Just giving a friendly update to everyone :) |
I'm in, deposit paid. Tilt, sorry for spamming your inbox, but there's one more PM coming your way.
|
Officially, we have two [2] spots left of 9k/6k still available at GB pricing. These are the absolute last two sets on this run. For those of you interested - Once these two sets sell, you will need to wait for the next batch from the factory. Before the coilovers arrive at Powertrix HQ in San Diego, CA, I can still offer GB pricing. Once the coilovers arrive, pricing will go back up to retail.
Stay tuned for more ETA updates :icon_tup: |
Originally Posted by tiltmode43
(Post 4036707)
To be honest, I'm not sure they will be received before August 13th in time to install for Mazfest 2011 :tear:
Right now, the ETA is looking to be around mid August, *possibly* late August. I don't have a concrete date just quite yet, but due to factory load and shipping details, some of the factors can be difficult to judge and impossible to control. They may come in time, I just don't want to make any uncertain promises. I'll keep you guys updated though! In the end, I can promise it will be worth it :icon_tup: I wanted these before the 19th so I could have them on for the track days I signed up for. :( Hopefully they get here in time. |
All times are GMT -5. The time now is 12:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands