That actually doesn't look too bad. Do you have any close up pics?

I tried the paint thing and it didn't turn out as good as I had hoped but it isn't terrible.

I'll post a pic later this weekend.

finished
 

here is an update of using electrical tape (+33)
the three pices of +33 tape overlap I then took a razor and cut the last half off as you can see in the pics.

the wax paper in the back didn't shade the light enough so i used 3 layers of black sharpie colored scotch clear tape.

one more
 

one more picture of it lit up. not the best but you can see that the lights match much better.

got mine, thank you!

Im in. PM me and send me to rotary radio knob heaven.

Really. Im serious.

qzeek it doesn't look like the knob is sitting flush.

Is it pushed as far as it can go?

The tape looks good.

Got mine vIce.....looks like it belongs on the car from the factory. Thanks again for setting up this GB.

I just pushed it on I thought thats how it is?
I'll go check to see if it goes down more.
I didn't want to break anything by shoving it.

The install is the same as the removal.....you have to wiggle a little to get it to move along the shaft. The top of the base should be flush with the panel.

Received my yesterday, looks great. I haven't decided if I'm going to paint it before I put in on though.

got mine monday
thanks for the great product and service

Got it...gonna tape it and dim it and put it on soon!!!!

Got mine last night--thanks again vice for setting this up. Took no less than a minute, Bascho's right--looks like it came from the factory. Well worth the $$$ --it's a great mod !

Thanks Dan...will await your PM when they come in...I am definitely in for the next one!!!

**Warning**

If you do tape it like I did, once it is all the way on it will be slightly tighter fit. Very slightly. Not enough to hender its push on and off function, and just tight enough to were you can't feel the click volume up and down.
If someone didn't know better they would't notice it.

Just want to make sure everyone knows this because once its on it will be A PITA to get off if you don't approve it.

BTW once i pushed it all the way on it looks great the color of the tape and the buttons is near perfect.

Got mine installed...I gotta say that I like the way it looks already. It actually brings out the silver trim that I hardly noticed before. Now, I have to keep my daughter from touching the knob. It has to stay str8 up!!! LOL!

I've just received mine. I can't wait to put it on!

you can mark damnyankee as received - thanks!

Thanks to everyone that participated and made this a success!
If you have received your knob please let me know so I can update this list.
Please be aware that these are being mailed 1st class Del./Confirm. it can take up to 9 days for it to get to you but usually no more than 5.
Dan
*******************************

$=Paid
√=Shipped
❤=Received
*******************************
$/√/❤ 1. Omicron
$/√/❤ 2. Lefty63
$/√/❤ 3. prafessa
$/√/❤ 4. whenson417
$/√/❤ 5. English
$/√/ 6. EyeBall Fixer...(o)(x)
$/√/ 7. Red_X8
$/√/❤ 8. Moumtz
$/√/❤ 9. DrRockin99
$/√/❤ 10. Salituro64
11. Razz1---------------> No Reply
$/√/ 12. Riccio
$/√/❤ 13. KWS
$/√/ 14. ManTunTun
$/√/❤ 15. jf65
$/√/❤ 16. Fanman
$/√/❤ 17. lesper4
$/√/❤ 18. Napboy
$/√/❤ 19. bascho
$/√/❤ 20. canaryrx8
$/√/❤ 21. qzeek
$/√/❤ 22. Indy_8
$/√/❤ 23. TerpWithAn8
$/√/ 24. spr grn8
$/√/❤ 25. jays8
$/√/❤ 26. RX8MAN04
$/√/ 27. MyKey
$/√/ 28. racer 13b
$/√/❤ 29. damnyankee
$/√/ 30. FDHerbert
$/√/ 31. silver bullet 53
$/√/❤ 32. darklingg
$/√/ 33. moRotorMotor
$/√/❤ 34. StealthTL
$/√/ 35. samyv2
$/√/❤ 36. Pletchrx8
$/√/ 37. OneEvilRx8
$/√/❤ 38. Evol1119
$/√/❤ 39. Fooey
$/√/ 40. Mateo
$/√/❤ 41. Gonnahanvan8
$/√/❤ 42. tx-rx
$/√/ 43. midlife crisis
$/√/❤ 44. TooBIG
$/√/❤ 45. G8rboy
$/√/ 46. DreRX8
$/√/❤ 47. Shinka_518
$/√/❤ 48. Hmeaders
49. rx8fanatic2085---------------> No Reply
$/√/❤ 50. RL8
$/√/❤ 51. mkztg
$/√/ 52. Munster
$/√/❤ 53. shortcrakr
$/√/ 54. lov2bugu
$/√/❤ 55. SC-ed
$/√/ 56. Alrib
$/√/ 57. McCall
$/√/ 58. Magrafx
$/√/ 59. mid-life crisis
$/√/❤ 60. extra Phil
$/√/ 61. colin204
$/√/ 62. Madhops
$/√/❤ 63. Nedor
$/√/❤ 64. Portero23
$/√/ 65. Ryan28A
$/√/ 66. ikagan
*/ 67. marvin_rock
$/√/❤ 68. SiLVeRE8
$/√/❤ 69. 9kNback
$/√/❤ 70. Jeager76
71. devious12---------------> No Reply
$/√/❤ 72. delrmx01
$/√/ 73. treaptron
$/√/❤ 74. RaceR-X8
$/√/ 75. AC8
$/√/❤ 76. crisis
$/√/ R1. UnstoppableDrew
$/√/ R2. 1stRotaRy
$/√/❤ R3. fenderlover
$/√/ R4. TheGreenOcho
R5. RX8 Pusher
$/√/ R6. hoosteen
$/√/ R7. avg8
R8. carbonRX8
$/ R9. GMFIV
$/√/R10. TiLm
R11. 2rotors

I got mine today.
Thanks vIce^gRip

my digicam is on the fritz or I'd take a pic but man that knob looks slick.
I won't be painting or anodizing or taping I like it just the way it is.
I like the faux C/F background too. And I like the way you can't see the 'rx-8' logo from the side.

it's nice jewelry for the car. and the knee pad rocks too.

thanks for doing this.

i received mine yesterday and i have painted it aluminum color for the rotor and semi gloss black for the circle part. i think it looks pretty good..i wouldnt say perfect job but im satisfied with it. heres are some pics of it..just to give you guys some ideas how it looks. sorry for the crappy cell phone pics :D:

I got mine. Here are some pics. I tried to match the interior a little.

Got mine.
Thks,
-BB

Got mine Vise, been out of the office. I will install later this afternoon nad report tomorrow.

Thanks :rock: