GROUP BUY - Pettit Racing's RX-8 Rotor Shaped Radio Knob
Greetings Club Members,
Pettit Racing's RX-8 Rotor Shaped Radio Knob GROUP BUY Authorized & Approved by Omicron. We will need at least 25 committed purchasers before we make the purchase and begin shipping. The GB will end on Monday 01.30.06 *********************************** The Offering: Minimum of 25 units must be ordered. 1 knob purchase - (Group Buy Price: $25 USD shipped/done) / (Retail: $29.99 + $4.50 shipping) Canadian orders will be honored at this price. Other countries please PM for confirmation. When you make Payment, please remember to add your Forum UserName in the Comment box to help keep track of the orders. The Method: Once the member pays, I will fulfill the order and ship 1st Class / Delivery Confirmation (2/3 Days Delivery - so says USPS). The Product: The Radio Knob is a direct snap-on replacement. It requires no tools and takes less than 5 minutes from start to finish. The back-light holes shown in the night images are being light from the radio units lighting and therefore; NO WIREING is required. *********************************** The knobs have a carbon fiber-like sticker emblem "RX-8" in clear urethane. http://i20.photobucket.com/albums/b2..._1950-2000.jpg http://i7.photobucket.com/albums/y25...RadioKnob1.jpg http://i7.photobucket.com/albums/y25...RadioKnob2.jpg http://i7.photobucket.com/albums/y25...RadioKnob3.jpg Special Thanks to glassetcher for these images. Please Note: The knobs now ship with the new CF-like sticker as seen in the Knob Only image. The images of the knob on the radio are the old CF-like sticker insert. *********************************** |
This is also posted on rx8web.com
|
Purchase Order:
1. Omicron :D: 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. |
i would but i already have a nice volume control knob..hehe
|
Originally Posted by Omicron
Purchase Order:
1. Omicron :D: 2. Lefty63 :worship: 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. This looks very good I'll take one |
Originally Posted by lefty63
This looks very good I'll take one
Count me in... |
Originally Posted by Ranged28
This is also posted on rx8web.com
|
Vice Grip...so no one is confused, only the first picture is correct
the following pictures are with the older sticker logo, they do not produce this version anymore the newer 'sticker' has a raised finish (first picture) Also I recommend posting pics of of the knob's non-rotary section painted in black (DIY job)...it looks stellar that way...I'll try to post a pic for you (it highlights the rotor symbol while the the rest of the knob blends into the HU facia much better). I can delete this post if you want once these things are addressed :ylsuper: |
1 Attachment(s)
Here I did a hack photochop job to give people an idea (with DIY paint job and correct center logo sticker)
btw this knob is really nice...I recommend everyone gets one https://www.rx8club.com/attachment.p...id=68026&stc=1 |
So the 3 holes on the edges light up or not?
|
Originally Posted by RL8
So the 3 holes on the edges light up or not?
|
Originally Posted by truemagellen
Here I did a hack photochop job to give people an idea (with DIY paint job and correct center logo sticker)
btw this knob is really nice...I recommend everyone gets one https://www.rx8club.com/attachment.p...id=68026&stc=1 |
Originally Posted by truemagellen
Vice Grip...so no one is confused, only the first picture is correct
the following pictures are with the older sticker logo, they do not produce this version anymore the newer 'sticker' has a raised finish (first picture) Also I recommend posting pics of of the knob's non-rotary section painted in black (DIY job)...it looks stellar that way...I'll try to post a pic for you (it highlights the rotor symbol while the the rest of the knob blends into the HU facia much better). I can delete this post if you want once these things are addressed :ylsuper: Correctly yes... The 1st image is the new stick on decal. The following 3 images are the old decal. There were posted to show how the knob looks mounted in place on the radio. I will photochop those images to have the correct look. Painting the non Rotor edges does look good too. If you did that to yours... why don't you go ahead and post the materials you used to complete the Job or a link to the DIY? I have no objections and see no reason for you to delete your post. To answer RL8's Question: The Knob has Mylar/Epoxy filled holes and the illumination is the back light from the radio lighting so there is NO WIREING required. The whole install takes less than 5 minutes! Thanks, Dan |
Originally Posted by lesper4
Looks great what is the installation like, is it a cover or a shaft type piece similar to the AC controls?
Rotor knob comes with its own "D" ring supplied in bag. Position Decal on knob. Place "D" ring in knob shaft recess. Push new knob on radio pin shaft. Use steering wheel controls so you don't have to twist the rotor upside down!:) |
1. Omicron
2. Lefty63 3. prafessa 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. |
The only reason I mentioned the other site is because there are almost 25 purchases over there and I am ready to get my knob so I hoped some people would go there to sign up so the first delivery would ship. I didn't mean to offend anyone.
|
Originally Posted by Ranged28
The only reason I mentioned the other site is because there are almost 25 purchases over there and I am ready to get my knob so I hoped some people would go there to sign up so the first delivery would ship. I didn't mean to offend anyone.
We will keep the GB's separate for respects sake, but we will manage the numbers internally. Dan |
looks sweet, sign me up
|
Originally Posted by vIce^gRip
Out of fairness to everyone, and if Omicron will Authorize, I will combine the total count for required hits to make the GB go forward. If we do this please do not double post. One post in one or the other.
We will keep the GB's separate for respects sake, but we will manage the numbers internally. Dan Randy |
1. Omicron
2. Lefty63 3. prafessa 4. whenson417 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. |
1. Omicron
2. Lefty63 3. prafessa 4. whenson417 5. English 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. |
1. Omicron
2. Lefty63 3. prafessa 4. whenson417 5. English 6. shortcrakr 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. |
1. Omicron
2. Lefty63 3. prafessa 4. whenson417 5. English 6. EyeBall Fixer...(o)(x) 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. |
Sign me up too please.
|
1. Omicron
2. Lefty63 3. prafessa 4. whenson417 5. English 6. EyeBall Fixer...(o)(x) 7. Red_X8 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. |
All times are GMT -5. The time now is 02:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands