(CLOSED) CF Dash Pod Cover
***MOD EDIT: Group Buy approved by Omicron, 11/1/04 ***
Ok, it is official we have approval for the CF Dash Pod Cover "Group Buy"...:) This cover should ship by December 15th and will be very nice quality, available in black carbon fiber it will wrap around the back and front of the POD for a factory look... The final price including shipping and handling to anywhere in the continental United States is U$159.99... Need to sell at least 20, so let me know... Add your name to the list and cut and paste, payment can be made by PayPal, check or money order. For payment information PM me... Payments should be in by November 22nd for delivery by December 15th otherwise your could take up to December 31st... (Group buy ends November 30th...) Here is a link to another thread with more information and a picture: https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/wheres-cf-dashpod-cover-thread-41470/ 1) cortc |
1) cortc
2) devious12<--need a date that the money is due won't have the funds for a bit |
1) cortc
2) devious12 3) nemesis8 Is this what you meant by cut-n-paste? |
1) cortc
2) devious12 3) nemesis8 4) adrian-1 |
The payments should be made by November 30th, that is when the group buy ends... The covers will be sent out in the order the payments are recieved as only one cover can be made at a time out of the tooling...
All covers should be out by December 15th... |
Is it possible to mould in a set of gage pods? 2 or 3 it doesn't matter. I would pay more.
|
Not for this run, that would require a new mold and tooling and the cost of the mold alone is between U$500.00 and U$1,000.00...
|
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 |
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 5) rot8ryx |
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 5) rot8ryx 6) Hisakata |
Cool 6, we just have 14 more to go...
|
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 5) rot8ryx 6) Hisakata 7) ranger4277 |
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx 6) Hisakata 7) ranger4277 |
Only 13 more, spread the word...
|
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx 6) Hisakata 7) ranger4277 8) Sendo |
do you have more pics of it, that one I saw wasn't too clear...
|
otrovago: No not at this time, the picture shown is of one that Mazda NA has on one of their cars... The one I am having made will actually be of much better quality and finish... It will cover the complete POD all the way to the edges and tucked into the dash recess as well as wrap around the front so that it will look factory...
|
1 Attachment(s)
Here's a picture from one of the RX8's in the Mazda booth at Sema. Just to give people an idea.
|
It is going to be very nice...:) Only 12 more to go...
|
1 Attachment(s)
Ok, in regards to the above car; I saw that one along with my fabricator at SEMA and we will be producing one much nicer and of better quality... I already paid for the molds and tooling as it is almost completed and should have the first one for my final approval by the 15th... I am very picky about quality and overall design balance and this cover will show that; those who know my car know I would not put it on if it was not top quality and nice and clean...
You guys/gals are going to be very happy with it, I am very exited about it...:) Also coming soon are mirror covers in CF, these will actually replace the stock ones as they are much simpler in design... |
hrmm
|
Originally Posted by bryrx804
hrmm
|
Originally Posted by cortc
What does "hrmm" mean?
bryrx804 ??? |
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx 6) Hisakata 7) ranger4277 8) Sendo 9) Colin204 |
Originally Posted by cortc
...spread the word...
. . . ...rushing to europian forum Hey guuuyys... p.s. After I saw that pic adrian posted, my fingers wanna type my name in the damn list... aw, sh*t... |
11 more...
|
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx 6) Hisakata 7) ranger4277 8) Sendo 9) Colin204 10) jgoldstein2000 |
10...
|
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx 6) Hisakata 7) ranger4277 (Paid PayPal 11.7.2004) 8) Sendo 9) Colin204 10) jgoldstein2000 |
Originally Posted by cortc
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx 6) Hisakata 7) ranger4277 (Paid PayPal 11.7.2004) 8) Sendo 9) Colin204 10) jgoldstein2000 |
1) cortc
2) devious12 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx 6) Hisakata 7) ranger4277 (Paid PayPal 11.7.2004) 8) Sendo 9) Colin204 10) jgoldstein2000 11) Riccio |
So any chance you can make it in Silver CF? or Red CF? :D
|
Alex:
I originally was going to offer it in colored CF but those are CF/Kevlar blends... It is a possibility, I will look into it again... I think for this appliation black would look the best... |
I don't know... I have the black and Red interior. The Black/Red CF/K might look good.
...then again, I have the silver CF/K MS-type wing and it might look nice to keep all the fiber the same color :D |
Alex: I think the all black but I will have an answer soon...
Also I have some pricing on the photoshoped hood you posted...:) |
I have the blk/red interior color scheme also. I installed black carbon fiber door sills from Evo-R and they look really good against the blk/red. I'll post a pic later when I get home, so you can see. I'm going to get the pod cover, and the entire mazdaspeed kit for the interior to match.
|
Carlos said that the MS dash kit was fake CF - is that going to be OK for you? I was also looking at this for my car also.
|
Originally Posted by devious12
I'm going to get the pod cover, and the entire mazdaspeed kit for the interior to match.
|
Nemesis8: Yes, the MS is CF look (If you have seen the interior of the MPV, it looks just like the dash...) Real black CF is very consistant so just about any CF product from a good fabricator will match very nicely...
For my car I just wanted to have a splash of CF in the interior to go with the Mazdaspeed CF B-Pillar garnishes... By the way the CF PODs are coming along very nicely and we were able to make the CF go right up against the guages when it wraps around the front edge of the POD with a one piece mold...:) |
Oh and the MS kit just replaces the center console, switch plates and the door handle plates... After I get done with mirror covers, I may have the door handle plates fabricated as well, that would probably be in January...
|
I'm going to wait and see what you can create. I would be willing to wait for your CF because it will match the Dash Pod cover you are currently pursuing. Thanks for the advice and comments. Now we just need to get more people on board with us. :D
|
9...
|
Originally Posted by adrian-1
I'd recommend not to get the MS CF kit. Too much money for fake CF, plus it wouldn't match very well.
|
Ok, the PODs will be here the 1st week of December; I allready paid for the molds and tooling upfront...
I will be sending payment for the PODs on the 22nd so everyone can get them on time. If you have not done so allready please send in your payments by next week... I will contact all of you with the PayPal information... Thanks... |
1) cortc
2) devious12 (Paid PayPal 11.10.2004) 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx 6) Hisakata 7) ranger4277 (Paid PayPal 11.7.2004) 8) Sendo 9) Colin204 10) jgoldstein2000 11) Riccio 12) xSxxKxxYx |
8...
|
1) cortc (Paid)
2) devious12 (Paid PayPal 11.10.2004) 3) nemesis8 (Paid PayPal 11.3.2004) 4) adrian-1 (Paid PayPal 11.4.2004) 5) rot8ryx Paid PayPal 11.15.2004) 6) Hisakata 7) ranger4277 (Paid PayPal 11.7.2004) 8) Sendo (Paid PayPal 11.11.2004) 9) Colin204 10) jgoldstein2000 (Paid PayPal 11.15.2004) 11) Riccio (Paid PayPal 11.11.2004) 12) xSxxKxxYx |
This is really going to be a nice mod for the interior - it's about time we added some CF to the drive from the passenger point of view. :p
|
Ok, just got back from my vacation and spoke with the fabricator; should have the first one next week...
Once I give the approval, should have the first 10 production ones by Dec 10th, I will then ship them out the next day... All payments need to be in by the 30th... |
Ok, group buy closes tomorrow; all payments need to be sent in by the Tuesday...
6) Hisakata (?) 9) Colin204 (?) 12) xSxxKxxYx (?) |
All times are GMT -5. The time now is 08:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands