RX8Club.com
0 2019/10/06 00:02:49
0 2019/06/22 14:11:45
0 2019/06/22 14:11:31
0 2019/06/22 14:11:19
0 2019/06/22 14:11:04
0 2019/06/19 09:20:47
0 2019/05/14 08:33:52
0 2019/04/24 19:48:25
0 2019/04/24 16:40:38
0 2019/04/05 13:45:00
Rear rotor
Rear rotor
0 2019/01/23 22:28:26
Front rotor
Front rotor
0 2019/01/23 22:27:41
IMAG1426
IMAG1426
0 2014/10/30 19:15:29
IMAG1425
IMAG1425
0 2014/10/30 19:14:58
IMAG1424
IMAG1424
0 2014/10/30 19:14:58
IMAG1423
IMAG1423
0 2014/10/30 19:14:58
IMAG1422
IMAG1422
0 2014/10/30 19:13:22
IMAG1421
IMAG1421
0 2014/10/30 19:13:22
IMAG1420
IMAG1420
0 2014/10/30 19:13:22
IMAG1419
IMAG1419
0 2014/10/30 19:12:32
IMAG1418
IMAG1418
0 2014/10/30 19:12:32
IMAG1417
IMAG1417
0 2014/10/30 19:12:32
IMAG1414
IMAG1414
0 2014/10/30 19:11:29
IMAG1412
IMAG1412
0 2014/10/30 19:11:29
IMAG1410
IMAG1410
0 2014/10/30 19:11:29
IMAG1409
IMAG1409
0 2014/10/30 19:10:43
hidden
hidden
0 2014/10/30 19:10:43
have to look to see the cable under the car, hidden like its OEM.
have to look to see the cable under the car, hidden like its OEM.
0 2014/10/30 19:10:43
have to look to see the cable under the car, hidden like its OEM.
have to look to see the cable under the car, hidden like its OEM.
0 2014/10/30 19:09:26
have to look to see the cable under the car, hidden like its OEM.
have to look to see the cable under the car, hidden like its OEM.
0 2014/10/30 19:09:26
panel fabricated with magnetic anchors made to help hold the panel in place.
panel fabricated with magnetic anchors made to help hold the panel in place.
0 2014/10/30 19:09:26
run the battery wires under the carpet towards the rear seats. The positive will go forward past the rear seats, the negative cables (I grounded each battery separately using 2awg cable to the base of both shock towers against the body of the car as well as provided them a shared ground)
run the battery wires under the carpet towards the rear seats. The positive will go forward past the rear seats, the negative cables (I grounded each battery separately using 2awg cable to the base of both shock towers against the body of the car as well as provided them a shared ground)
0 2014/10/30 19:08:31
connecting positive terminal
connecting positive terminal
0 2014/10/30 19:08:31
clean up the positive of the main harness (oem harness that continues forward to the fusebox) to ensure a solid connection between that terminal, the terminal of your wire for the battery relocation, and the starter positive terminal.
clean up the positive of the main harness (oem harness that continues forward to the fusebox) to ensure a solid connection between that terminal, the terminal of your wire for the battery relocation, and the starter positive terminal.
0 2014/10/30 19:08:31
clip the 2awg positive cable into the open space on the clips under the car
clip the 2awg positive cable into the open space on the clips under the car
0 2014/10/30 19:07:21
cable comes out through the bottom near the lines for the fuel system. At this point follow these lines and use cable ties to help secure and tuck away this battery cable from drooping down and supporting it until it reaches the fuel line clips further ahead the underneath of the vehicle.
cable comes out through the bottom near the lines for the fuel system. At this point follow these lines and use cable ties to help secure and tuck away this battery cable from drooping down and supporting it until it reaches the fuel line clips further ahead the underneath of the vehicle.
0 2014/10/30 19:07:21
after passing the cable through the rear sear back, cut out the middle of this rubber grommet and pass the cable through this hole. It might be easier/helpful to use something like a wire hanger to help feed the wire from under the car through the hole the cable will exit through (see next picture for reference)
after passing the cable through the rear sear back, cut out the middle of this rubber grommet and pass the cable through this hole. It might be easier/helpful to use something like a wire hanger to help feed the wire from under the car through the hole the cable will exit through (see next picture for reference)
0 2014/10/30 19:07:21
locked in
locked in
0 2014/10/30 19:06:19
apply paint for corrosion protection
apply paint for corrosion protection
0 2014/10/30 19:06:19
test fit
test fit
0 2014/10/30 19:06:19