RX8Club.com
7/16/2011 session with AltSpace.
7/16/2011 session with AltSpace.
0 2011/07/19 07:14:14
7/16/2011 session with AltSpace.
7/16/2011 session with AltSpace.
0 2011/07/19 07:14:14
7/16/2011 session with AltSpace.
7/16/2011 session with AltSpace.
0 2011/07/19 07:12:39
7/16/2011 session with AltSpace.
7/16/2011 session with AltSpace.
2 2011/07/19 07:12:39
7/16/2011 session with AltSpace.
7/16/2011 session with AltSpace.
0 2011/07/19 07:12:39
7/16/2011 session with AltSpace.
7/16/2011 session with AltSpace.
0 2011/07/19 07:10:34
7/16/2011 session with AltSpace.
7/16/2011 session with AltSpace.
0 2011/07/19 07:10:34
7/16/2011 session with AltSpace.
7/16/2011 session with AltSpace.
0 2011/07/19 07:10:34
Cluster 95% in and running. The center trim still had to be snapped in and I need to make the oil temp actually read the temp lol. You can see my screw up on the lower right corner where I scratched the surrounding trim. And yes I didn't do too well with the carbon wrap....needs a haircut lol. Gonna make another panel in a few weekends. Have the gauges running blue in the day and white at night to match the stockies.
Cluster 95% in and running. The center trim still had to be snapped in and I need to make the oil temp actually read the temp lol. You can see my screw up on the lower right corner where I scratched the surrounding trim. And yes I didn't do too well with the carbon wrap....needs a haircut lol. Gonna make another panel in a few weekends. Have the gauges running blue in the day and white at night to match the stockies.
0 2010/06/02 15:58:24
First cluster attempt, I sucked with the carbon so it's fuzzy along the edges. I made it out of aluminum then wrapped it. I'm gonna make a new one soon.
First cluster attempt, I sucked with the carbon so it's fuzzy along the edges. I made it out of aluminum then wrapped it. I'm gonna make a new one soon.
1 2010/06/02 15:54:49
I ran my wires below the factory bundle, the 2 reds and the black hanging down. Just follow the factory harness behind the trim to bring them over to the center console.
I ran my wires below the factory bundle, the 2 reds and the black hanging down. Just follow the factory harness behind the trim to bring them over to the center console.
0 2010/06/02 15:54:49
This thing helped me a bunch.
This thing helped me a bunch.
0 2010/06/02 15:54:49
Yank out the battery and the two piece tray to access the radiator lines. There is already a metal connecter here attached to that little bracket to the right. Chop it off and install your adapter for water temp. I like the fit of the 38mm from Prosport.
Yank out the battery and the two piece tray to access the radiator lines. There is already a metal connecter here attached to that little bracket to the right. Chop it off and install your adapter for water temp. I like the fit of the 38mm from Prosport.
0 2010/06/01 15:40:16
I then attached the line and senders to a T-fitting. Not as clean as having a sandwich plate, but since we can't use it I was happy. I have it mounted by my break reservoir for now to put some milage and check for any leaks, none yet though. EDIT, don't bother with the temp sensor there, it wont read anything....
I then attached the line and senders to a T-fitting. Not as clean as having a sandwich plate, but since we can't use it I was happy. I have it mounted by my break reservoir for now to put some milage and check for any leaks, none yet though. EDIT, don't bother with the temp sensor there, it wont read anything....
0 2010/06/01 15:34:28
Once you have the plug out, attach the steel braided line.
Once you have the plug out, attach the steel braided line.
0 2010/06/01 15:34:28
This is the plug you remove to tap off for oil press and temp. It is just aft and a little above the rear trailing plug.
This is the plug you remove to tap off for oil press and temp. It is just aft and a little above the rear trailing plug.
0 2010/06/01 15:34:28
REVi installed. Painted the lettering to match.
REVi installed. Painted the lettering to match.
4 2010/05/18 04:52:42
Racing Beat Oil screens.
Racing Beat Oil screens.
2 2010/05/18 04:52:42
Everything installed, bumper about to go back on.
Everything installed, bumper about to go back on.
0 2010/05/18 04:51:00
Racing Beat Duct front.
Racing Beat Duct front.
0 2010/05/18 04:51:00
Racing Beat Duct top.
Racing Beat Duct top.
0 2010/05/18 04:51:00
Wheel Detail. The camera on my phone sucks...made the wheel look not round.
Wheel Detail. The camera on my phone sucks...made the wheel look not round.
0 2010/05/11 13:52:54
Clean
Clean
0 2010/05/11 13:50:54
2 2010/05/11 13:50:54
I'll load more soon..
I'll load more soon..
2 2010/04/29 05:07:42