RX8Club.com
They included an unpainted replacement headlight cover.
They included an unpainted replacement headlight cover.
0 2012/10/28 13:04:06
Interior needs some rework, worst part of the car. Mix of replacement and aftermarket will fix it up.
Interior needs some rework, worst part of the car. Mix of replacement and aftermarket will fix it up.
0 2012/10/28 13:04:06
Overall exterior is in decent shape, few dings and dents. Nothing too serious but suffering badly from paint fade.
Overall exterior is in decent shape, few dings and dents. Nothing too serious but suffering badly from paint fade.
0 2012/10/28 13:04:06
Back view of fuel line and glow plug wires.
Back view of fuel line and glow plug wires.
5 2009/06/19 11:06:52
Glow plug wires installed.
Glow plug wires installed.
2 2009/06/19 11:06:52
Front view of engine and glow plug wires.
Front view of engine and glow plug wires.
2 2009/06/19 11:00:55
Side view of flared intake runner and bent exhaust.
Side view of flared intake runner and bent exhaust.
1 2009/06/19 11:00:55
Engine & Test Stand With Fuel Line & Glow Plug Wires Installed. Has great compression and sounds awesome when turned over with a drill at 2,500 RPM. Got fuel & castor oil...now time to fire it up. Hope it works half as good as it looks. Had a delay due to snapping the original eccentric shaft (many hours lost due to shipping new stock and remachining). Note: Due not try to thread 4140 with a die after flame hardening the steel. I was in a hurry and forgot to thread before hardening and learned the hard way... I need to slow down and think before jumping into the next task.
Engine & Test Stand With Fuel Line & Glow Plug Wires Installed. Has great compression and sounds awesome when turned over with a drill at 2,500 RPM. Got fuel & castor oil...now time to fire it up. Hope it works half as good as it looks. Had a delay due to snapping the original eccentric shaft (many hours lost due to shipping new stock and remachining). Note: Due not try to thread 4140 with a die after flame hardening the steel. I was in a hurry and forgot to thread before hardening and learned the hard way... I need to slow down and think before jumping into the next task.
1 2009/06/19 11:00:55
Sand Blasting followed by high temp paint. Rotor shaped engine mount.
Sand Blasting followed by high temp paint. Rotor shaped engine mount.
5 2009/05/06 13:23:23
Sand Blasting followed by high temp paint.
Sand Blasting followed by high temp paint.
2 2009/05/06 13:23:23
Engine with rotor.
Engine with rotor.
8 2009/04/16 19:03:45
Perspective shot: scale engine with Renny rotor.
Perspective shot: scale engine with Renny rotor.
1 2009/04/16 19:03:45
Engine and internals.
Engine and internals.
5 2009/04/16 19:03:45
Grinding the cooling fins
Grinding the cooling fins
0 2009/04/16 19:00:40
After oil quenching the eccentric shaft.
After oil quenching the eccentric shaft.
0 2009/04/16 19:00:40
Cast Iron rear housing read to be cut down.
Cast Iron rear housing read to be cut down.
0 2009/04/16 19:00:40
Black Corner
Black Corner
2 2009/04/02 10:25:16
Functional Stock Buttons
Functional Stock Buttons
5 2009/04/02 10:25:16
What it was made for!
What it was made for!
0 2009/01/30 08:56:56
Closed bridge with rotor
Closed bridge with rotor
5 2009/01/30 08:56:56