RX8Club.com
1 2018/10/28 13:09:33
0 2025/10/09 09:53:56
0 2025/10/09 09:53:52
to throttle body
to throttle body
0 2023/11/18 13:02:10
RH side to AC
RH side to AC
0 2023/11/18 12:57:57
LH side from AC
LH side from AC
0 2023/11/18 12:57:56
LH side to engine compartment
LH side to engine compartment
0 2023/11/18 12:57:54
Turbo outlet is straight up, pipe weld is too close.
Turbo outlet is straight up, pipe weld is too close.
0 2023/11/18 12:53:08
RH side out of engine compartment
RH side out of engine compartment
0 2023/11/18 12:53:07
should have removed the top gap
should have removed the top gap
0 2023/11/18 12:13:33
Three bracket mounting using threated rubber inserts
Three bracket mounting using threated rubber inserts
0 2023/11/18 12:13:31
original positioning for fitment
original positioning for fitment
0 2023/11/18 12:13:30
used rubber inserts with bonded threads
used rubber inserts with bonded threads
0 2023/11/14 15:59:56
cutting out the bottom half of the crash bar, in hindsight the AC could have been a bit higher to remove the gap at the top
cutting out the bottom half of the crash bar, in hindsight the AC could have been a bit higher to remove the gap at the top
0 2023/11/14 15:59:39
0 2023/11/14 15:54:00
0 2023/11/14 15:51:21
0 2023/11/14 15:14:22
Initial fitting
Initial fitting
0 2023/11/14 15:11:30
rear
rear
0 2023/11/14 13:51:16
front
front
0 2023/11/14 13:49:46
Front
Front
0 2023/11/14 13:46:15
0 2023/11/14 13:35:34
0 2023/11/14 13:35:30
0 2023/05/04 20:15:40
Lifted for rut clearance
Lifted for rut clearance
0 2023/01/29 12:20:17
Why? Just why?
Why? Just why?
0 2023/01/22 11:31:17
0 2023/01/22 11:29:29
0 2022/07/03 13:32:08
0 2022/04/30 10:42:05
0 2022/03/12 14:07:49
0 2021/11/14 11:37:52
0 2021/07/27 12:30:46
0 2021/07/27 12:30:31
0 2021/04/26 16:52:28
0 2021/02/16 22:35:39
Original split flow manifold
Original split flow manifold
0 2021/01/10 19:21:13
0 2020/12/10 10:49:08
0 2020/12/10 10:48:56
0 2020/12/10 10:48:27
0 2020/10/20 19:54:18