RX8Club.com
Drivers side oil cooler got an additional bracket, and some new lines. Intake piping in place and ready to go.
Drivers side oil cooler got an additional bracket, and some new lines. Intake piping in place and ready to go.
1 2015/08/16 18:58:06
So much want
So much want
0 2018/05/03 14:34:16
Gotta love the hood vents
Gotta love the hood vents
0 2018/05/03 08:20:54
0 2017/11/15 20:02:07
0 2017/11/11 11:36:23
0 2017/05/16 16:33:04
0 2017/05/16 16:32:48
0 2017/05/16 16:32:25
No extra air intakes
No extra air intakes
0 2016/08/03 16:18:05
0 2016/08/03 16:17:21
0 2015/11/10 17:44:37
0 2015/11/04 08:36:56
0 2015/11/04 08:36:53
0 2015/11/04 08:36:49
0 2015/11/04 08:36:45
0 2015/11/04 08:36:41
0 2015/11/04 08:36:37
0 2015/09/29 17:53:09
0 2015/09/19 21:11:31
0 2015/09/10 14:43:59
Lambo doors and a bumper held on with duct tape
Lambo doors and a bumper held on with duct tape
0 2015/09/09 18:06:18
High capacity oil pan, and the custom midpipe. Scott installed a flex section to minimize stress on the exhaust manifold.
High capacity oil pan, and the custom midpipe. Scott installed a flex section to minimize stress on the exhaust manifold.
0 2015/08/16 20:02:20
MAF has been reinstalled. HKS blow off valve can also be seen.
MAF has been reinstalled. HKS blow off valve can also be seen.
0 2015/08/16 20:02:18
Drivers side oil cooler, new oil lines, and more intake tubing. Both oil cooler fans also got new brackets.
Drivers side oil cooler, new oil lines, and more intake tubing. Both oil cooler fans also got new brackets.
0 2015/08/16 20:02:16
Passenger side oil cooler fan installed. You can also see the new dual pass radiator, charge tube, and new oil lines
Passenger side oil cooler fan installed. You can also see the new dual pass radiator, charge tube, and new oil lines
0 2015/08/16 20:02:15
Second oil cooler installed. ($20 on eBay, cant beat that!)
Second oil cooler installed. ($20 on eBay, cant beat that!)
0 2015/08/16 20:02:13
We had to rework the front bumper area to accommodate all the new stuff. Intake in place, as well as the intercooler and new crash bar
We had to rework the front bumper area to accommodate all the new stuff. Intake in place, as well as the intercooler and new crash bar
0 2015/08/16 20:02:12
All tubes in place. Battery tray had to be fabricated out of aluminum and rotated 90 degrees
All tubes in place. Battery tray had to be fabricated out of aluminum and rotated 90 degrees
0 2015/08/16 20:02:10
Better shot of the wastegate, the oil pan, and the turbo oil return
Better shot of the wastegate, the oil pan, and the turbo oil return
0 2015/08/16 20:02:09
Tial 44mm wastegate and downpipe
Tial 44mm wastegate and downpipe
0 2015/08/16 20:02:07
Tial 44mm Wastegate
Tial 44mm Wastegate
0 2015/08/16 20:01:39
High capacity oil pan, and the custom midpipe is in the background. Scott used a flex section to decrease the stresses placed on the exhaust manifold
High capacity oil pan, and the custom midpipe is in the background. Scott used a flex section to decrease the stresses placed on the exhaust manifold
0 2015/08/16 18:58:09
MAF has been reinstalled. Recirculated BOV can also be seen here.
MAF has been reinstalled. Recirculated BOV can also be seen here.
0 2015/08/16 18:58:07
Oil cooler fan installed, and new stainless steel oil lines in place. You can also see the dual pass radiator, and the charge tubing
Oil cooler fan installed, and new stainless steel oil lines in place. You can also see the dual pass radiator, and the charge tubing
0 2015/08/16 18:58:04
Second oil cooler installed. ($20 on ebay. Cant beat that)
Second oil cooler installed. ($20 on ebay. Cant beat that)
0 2015/08/16 18:58:02
We had to rework the front bumper area to accommodate all of the new stuff. Intake system in place, as well as intercooler and new crash bar.
We had to rework the front bumper area to accommodate all of the new stuff. Intake system in place, as well as intercooler and new crash bar.
0 2015/08/16 18:58:00
All charge tubes are in place. Battery tray had to be fabricated out of aluminum, and turned 90 degrees.
All charge tubes are in place. Battery tray had to be fabricated out of aluminum, and turned 90 degrees.
0 2015/08/16 18:57:58
Better shot of the wastegate, the oil pan, and the turbo oil return to the pan.
Better shot of the wastegate, the oil pan, and the turbo oil return to the pan.
0 2015/08/16 18:57:57
Tial 44mm wastegate and downpipe
Tial 44mm wastegate and downpipe
0 2015/08/16 18:57:55
If only it was real.....
If only it was real.....
0 2015/08/10 19:17:26