RX8Club.com
So i made a blanket, big deal. It's a sweet blanket.
So i made a blanket, big deal. It's a sweet blanket.
0 2015/03/07 19:32:13
Yes, somehow i broke it..
Yes, somehow i broke it..
0 2015/03/08 04:35:05
One is clean, one is not. Im working on it
One is clean, one is not. Im working on it
0 2015/03/08 04:35:25
Just some smoked spicy jerky and some smoked ham.
Just some smoked spicy jerky and some smoked ham.
0 2015/04/04 16:22:18
Lotek pod transplant complete to my panel. I redid all the wiring as well, this was this end result.
Lotek pod transplant complete to my panel. I redid all the wiring as well, this was this end result.
0 2015/04/04 16:26:08
I cut off the old barrel and grinded everything smooth. I bent everything to shape and used a high tack, high temp silicone adhesive to mount the new barrel. 24 hours later it's solid as a rock.
I cut off the old barrel and grinded everything smooth. I bent everything to shape and used a high tack, high temp silicone adhesive to mount the new barrel. 24 hours later it's solid as a rock.
0 2015/04/04 16:27:00
No phantom here. Im actually in the garage now.
No phantom here. Im actually in the garage now.
0 2015/04/04 21:49:25
Trunk
Trunk
0 2015/04/04 21:51:14
Gauges as i said are in. At least those 3... 2 more
Gauges as i said are in. At least those 3... 2 more
0 2015/04/04 21:52:12
0 2015/04/11 12:09:28
0 2015/04/11 12:09:58
0 2015/04/11 12:10:17
0 2015/04/11 12:12:32
0 2015/04/11 12:13:16
0 2015/04/11 12:16:10
0 2015/04/11 12:18:22
0 2015/04/11 17:33:21
0 2015/04/11 17:33:47
0 2015/04/12 10:55:28
Thanks for the likes blue
Thanks for the likes blue
0 2015/04/18 09:00:17
Goodnight everyone.
Goodnight everyone.
0 2015/05/07 22:38:30
Prolite and clutch
Prolite and clutch
0 2015/07/12 10:37:15
My wife and I after the 5K Tata trot
My wife and I after the 5K Tata trot
0 2015/07/12 10:38:33
0 2015/07/13 16:33:48
0 2015/07/13 16:34:12
0 2015/07/26 15:47:02
Had to pull the mounts to get the turbo in place. Currently I need New hardware for the turbo to manifold. Hopefully I can grab it tomorrow on my way to work.
Had to pull the mounts to get the turbo in place. Currently I need New hardware for the turbo to manifold. Hopefully I can grab it tomorrow on my way to work.
0 2015/09/13 16:57:55
Been a while since u put up any pics
Been a while since u put up any pics
0 2015/10/12 18:07:20
0 2015/11/20 16:55:41
i was debating using this as a template...
i was debating using this as a template...
0 2016/01/07 14:31:43
0 2016/01/22 17:37:46
0 2016/02/07 18:24:18
0 2016/02/21 15:50:24
0 2016/02/22 12:27:51
0 2016/03/21 17:05:39
0 2016/03/22 12:24:58
0 2016/03/22 12:25:27
0 2016/03/22 12:25:36
0 2019/02/14 07:14:23
0 2016/03/22 12:25:45