{ FS } Rx-8 Performance Stuff
Thread Starter
From the Roots Up!
Joined: Nov 2010
Posts: 58
Likes: 0
From: Canada
Rx-8 Performance Stuff
All stuff is used from Marc-Andre Bergeron's CTCC Rx-8 which means limited race use, at most 3 years of 3-4 race weekends/year. Unfortunately I don't know how long each item has been used, since we took over the car from another team. But I'm honest! Lot's of stuff will be thrown out because it wasn't good enough to sell.
Located in Ajax/Oshawa but car is in Kitchener for the time being so we can bring items there.
Extra MAF adapter for Revi intake: $50 or swap with the blue one. The silver is from any kit made after 2010.
Standard Coilovers- great condition, no visible leaks. Most likely used for one season as the car went to Speedsource and had Multimatic dampers installed in 2010. I think it's the STD R3 model dampers with 8/6k springs (Spring P/N's 15006 front, 18008 rear, if you want to double check). Two spare springs P/N 18010, 10k spring rate. $700
**NOTE: the threaded collars on the bench aren't for this suspension.
**NOTE: do not come with front top mounts but should be able to re-use OEM.
Renesis Waterpump BNIB with gasket, aftermarket: $50
***Renesis Keg External Parts: $300
The engine is no good due to oil pressure loss and we'll be tearing it down to see the damage. Take everything except the ignition wires and main keg for $300... waterpump & housing, coils, fancy oil filler cap, throttle body, manifolds, flywheel, etc.
Racing Beat Rev-i Intake w/ MAF: SOLD
Racing Beat Headers: SOLD
3" Race Exhaust, header back: SOLD
Stock diff with 4.77 Final Drive: SOLD
Racing Beat flashed PCM:SOLD
Located in Ajax/Oshawa but car is in Kitchener for the time being so we can bring items there.
Extra MAF adapter for Revi intake: $50 or swap with the blue one. The silver is from any kit made after 2010.
Standard Coilovers- great condition, no visible leaks. Most likely used for one season as the car went to Speedsource and had Multimatic dampers installed in 2010. I think it's the STD R3 model dampers with 8/6k springs (Spring P/N's 15006 front, 18008 rear, if you want to double check). Two spare springs P/N 18010, 10k spring rate. $700
**NOTE: the threaded collars on the bench aren't for this suspension.
**NOTE: do not come with front top mounts but should be able to re-use OEM.
Renesis Waterpump BNIB with gasket, aftermarket: $50
***Renesis Keg External Parts: $300
The engine is no good due to oil pressure loss and we'll be tearing it down to see the damage. Take everything except the ignition wires and main keg for $300... waterpump & housing, coils, fancy oil filler cap, throttle body, manifolds, flywheel, etc.
Racing Beat Rev-i Intake w/ MAF: SOLD
Racing Beat Headers: SOLD
3" Race Exhaust, header back: SOLD
Stock diff with 4.77 Final Drive: SOLD
Racing Beat flashed PCM:SOLD
Last edited by CS13B; Apr 13, 2014 at 06:10 PM. Reason: Adding Pictures/ Descriptions
Thread Starter
From the Roots Up!
Joined: Nov 2010
Posts: 58
Likes: 0
From: Canada
They come with what look like shortened tower mounts for the rear. I'll check for front top mounts but I didn't see any. They were heavily bubble wrapped so I only undid two packages to show the condition.
Thread Starter
From the Roots Up!
Joined: Nov 2010
Posts: 58
Likes: 0
From: Canada
Header and Intake Sold
Also update on the rest of the exhaust: There's only one muffler and apparently it's quite loud, so we've dropped the price to accommodate adding another muffler or resonators.
Also update on the rest of the exhaust: There's only one muffler and apparently it's quite loud, so we've dropped the price to accommodate adding another muffler or resonators.
Last edited by CS13B; Mar 2, 2014 at 06:27 PM.
Thread Starter
From the Roots Up!
Joined: Nov 2010
Posts: 58
Likes: 0
From: Canada
I think I've sent and replied to all PM's so far. Sorry for the delays in responses to some people. PM's are the best way to contact me since I get e-mail notifications that way.
Thread Starter
From the Roots Up!
Joined: Nov 2010
Posts: 58
Likes: 0
From: Canada
Diff is sold.
Update on the suspension: They DO NOT come with front top mounts... we are still using them on our current set up. I've been told you should be able to use the stock ones, but can't confirm since I've never put a set together. There's no adjustment on the top anyways. Price drop to $700.
Update on the suspension: They DO NOT come with front top mounts... we are still using them on our current set up. I've been told you should be able to use the stock ones, but can't confirm since I've never put a set together. There's no adjustment on the top anyways. Price drop to $700.
Last edited by CS13B; Mar 28, 2014 at 12:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post