Notices
Canada Forum For our friends up North, eh!

Spark Plugs - question

Old Apr 20, 2009 | 06:36 PM
  #1  
MrJynx's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 477
Likes: 0
From: toronto, canada
Spark Plugs - question

grrr, so I'm a little pissed about this one, but here's a quick run down of what my rant is about.

I've had my rx8 since 2004, it's been running great, still feels like a new car. It's been experiencing some odd flooding issues the past year or so (flooded a few times since last summer). Each time the plugs were *apparently* changed, etc, etc.

So now this past week my father decided to take it out for a drive, car doesn't start, car gets towed back to the dealership. They came back and said my plugs haven't been changed in a long time so they wanted to do a full replacement. Now this is what really pissed me off, they just quoted me $459 for deflood and spark plugs. apparently plugs cost 360 + labor? am i missing something here? are these plugs made of gold? I searched the forum and didn't see any real indication other than the mazda part should cost 20 bucks per plug. Unless i need 18 plugs I really feel like they're ripping me off..
Reply
Old Apr 20, 2009 | 07:09 PM
  #2  
Thumper3322's Avatar
Registered
 
Joined: Oct 2007
Posts: 2,210
Likes: 0
From: Ajax, Ontario
Nope from the dealership that is about right.

U are in toronto, why arent u going to Scarb Mazda anyhow

Buy plugs yourself and do it yourself will save yourself $300+
Reply
Old Apr 20, 2009 | 07:12 PM
  #3  
ZmFnZm's Avatar
Registered User
 
Joined: Oct 2008
Posts: 994
Likes: 0
From: Oakville, ON
Thumper's got it right, the markup is huge on those things... pick some up and do it yourself

by the way who "apparently" changed your plugs. I would go after them and find out if they even did anything the last time.
Reply
Old Apr 20, 2009 | 07:30 PM
  #4  
01Racing's Avatar
Registered
 
Joined: Mar 2004
Posts: 1,637
Likes: 0
From: Toronto
I hope it wasnt us lol
Reply
Old Apr 20, 2009 | 07:57 PM
  #5  
ZmFnZm's Avatar
Registered User
 
Joined: Oct 2008
Posts: 994
Likes: 0
From: Oakville, ON
Originally Posted by 01Racing
I hope it wasnt us lol
LOL, nope it was the one closer to my house. I found an alternate source for OEM updated plugs before i got a chance to come knocking on your door.
Reply
Old Apr 21, 2009 | 04:27 AM
  #6  
AndrewE's Avatar
Yellow Fever
 
Joined: Mar 2007
Posts: 148
Likes: 1
From: Lanark, ON
I paid like 100 bux cdn shipped to my door from a member on this board
Reply
Old Apr 21, 2009 | 04:37 AM
  #7  
DOMINION's Avatar
I don't buy Kool-Aid
 
Joined: Apr 2004
Posts: 8,823
Likes: 2
From: Vegas Baby!
I just got some from https://www.fluidmotorsports.com for $80+shipping! you can change then spark plugs your self in like 20 min. Its really eazy. My friend took his 8 in and they charged him over 500.00 for coils and new plugs. Crazy stuff. But its like 95.50 an hour where I'm at.
Reply
Old Apr 21, 2009 | 07:51 AM
  #8  
Thumper3322's Avatar
Registered
 
Joined: Oct 2007
Posts: 2,210
Likes: 0
From: Ajax, Ontario
500 for plugs and coils that's good, I got charged just over 700 for plugs and wires, before I knew jack about our cars. ouch! And would have cost me another 400+ for coils and install. I love this forum

Last edited by Thumper3322; Apr 21, 2009 at 10:42 AM.
Reply
Old Apr 21, 2009 | 09:15 AM
  #9  
dozer's Avatar
on his 3rd rx8
iTrader: (3)
 
Joined: Dec 2006
Posts: 6,036
Likes: 12
From: santa ana, ca
you can also use rx7 plugs...really cheap, you just need washers for them
Reply
Old Apr 21, 2009 | 10:00 AM
  #10  
Atilla's Avatar
I am THAT guy
iTrader: (1)
 
Joined: May 2007
Posts: 5,995
Likes: 12
From: Caca Cali
DIY FTW.

OP: have you replaced the coils?
Reply
Old Apr 21, 2009 | 08:02 PM
  #11  
BlueFrenzy's Avatar
Rotary Powered Decepticon
 
Joined: Aug 2004
Posts: 1,618
Likes: 1
From: Calgary, AB
DIY!!! I'm sure there are some local guys that are willing to give you a hand. If not, read up on the forums in the DIY spark change. If you don't have a spark plug tool, there's one at Canadian Tire that has a "bendable" head for about $15. I couldn't have done my plugs with just my regular ratchet. Good luck!
Reply
Old Apr 22, 2009 | 01:13 PM
  #12  
01Racing's Avatar
Registered
 
Joined: Mar 2004
Posts: 1,637
Likes: 0
From: Toronto
Where were we when you guys paid all that money for plugs and install, I could have been retired by now!
Reply
Old Apr 22, 2009 | 01:26 PM
  #13  
Thumper3322's Avatar
Registered
 
Joined: Oct 2007
Posts: 2,210
Likes: 0
From: Ajax, Ontario
LOL...Far away from where I live
Reply
Old Apr 22, 2009 | 02:45 PM
  #14  
Redshift's Avatar
Spinning Dorito Junkie
iTrader: (2)
 
Joined: Jul 2003
Posts: 747
Likes: 1
From: Halifax, Nova Scotia, Canada
You guys need to start taking you RX8s to a couple of auto-slalom's per year so that you can qualify for competition via MazdaSpeed Motorsports team support.

I got coils, plugs and "Mazdaspeed" (Taylor) plug wires for about $200 as I recall.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jesus Martinez
Series I Aftermarket Performance Modifications
72
Jul 26, 2023 11:29 PM
05TR1CH
New Member Forum
14
Apr 18, 2023 04:56 AM
GK1707
RX-8 Parts For Sale/Wanted
8
Dec 2, 2015 10:01 AM
Psychofox
RX-8 Parts For Sale/Wanted
0
Aug 20, 2015 04:48 AM
Obivious
New Member Forum
0
Jul 29, 2015 05:57 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 06:00 PM.