Group Buy Led #1: Interior
So I think its time to start one of the first few group buys for the Fall/Winter term.
First up is led for the interior, if there is enough interest in the footwell lights, I'll talk to rasp and see if we can order a set in together. Post up if your interested, and what lights you want switched, and color. I'll sort out everything within Sunday, gives more time for people to see what they want. Ideally, want to place order by Monday. I'm looking at buying from vleds/canadianautoworks (if there source in the states is vled/ rx8strakes. RX8Strakes Light Set: http://www.rx8strakes.com/index.asp?...TS&Category=86 Vleds Site: http://www.v-leds.com/Shop/Control/fp/SFV/32481 I'm not gonna do exterior yet, cause it might get complicated. I'm interested in switching my xenons to a higher K and getting either HID fogs or Led to Match the Xenons. RX8Strakes Total for the set comes at 28 bucks, prior to shipping. Will update price for Vleds soon. |
Prospectjtaz: White; Door, Map, Glove Box, Trunk, Rear Dome
|
I would love to join this GB. I want everything changed to LED (blue on Sand leather I guess? Need more research...) for my interior and exterior EXCEPT Fogs, Highbean, Stock 4300k Xenons -- may get 6000k HID for both fog and low beam...will see.)
Count me in. Thanks Jay. FYI Parking lights.......white 6 LEDs http://frickinbrite.com/catalog/prod...products_id=48 Clear Corners.......white 6 LEDs http://frickinbrite.com/catalog/prod...products_id=48 Door Courtesy lights.........blue 6 LEDs http://frickinbrite.com/catalog/prod...products_id=49 Map Lights..........blue 5 refractor LEDs http://frickinbrite.com/catalog/index.php?cPath=40_24 Rear Dome..........blue festoon/LED http://frickinbrite.com/catalog/prod...roducts_id=288 Glove..............blue 6 LEDs http://frickinbrite.com/catalog/prod...products_id=49 Footwells, have two blue LED circuit boards each side(driver and passenger), these are a little more subtle that what you've probably seen. http://frickinbrite.com/catalog/prod...roducts_id=243 Under the front seats(near the rear), I have RR's blue circuit boards tied into the Courtesy and Footwells above. https://www.rx8club.com/group-buy-center-85/custom-led-footwell-lights-118507/ Inside Trunk.....white 6 LEDs http://frickinbrite.com/catalog/prod...products_id=48 License plate......white 6 LEDs http://frickinbrite.com/catalog/prod...products_id=48 Brake lights........18 LED 7440/7443 red http://frickinbrite.com/catalog/prod...roducts_id=305 Back up lights.........18 LED 7440/7443 white http://frickinbrite.com/catalog/prod...roducts_id=304 Next up, I'm after all the dash and radio leds to blue, but that's gonna be a bitch! Unless I get Lurch to do it! I think that's it unless I forgot something? Well, I did do the fogs with Hoen H11's too! Yes, I am sick! I also have the RX8Strakes Stealth brake light. http://www.rx8strakes.com/index.asp?...PROD&ProdID=31 |
Originally Posted by prospectjtaz
(Post 2644296)
Prospectjtaz: White; Door, Map, Glove Box, Trunk, Rear Dome
|
Status update please.
|
I think the syntax format is:
[name] (color of footwell) ; (location of interior LEDs required separated by commas) |
I am asking for price update. Usually when people get it they will get it in one shot anyway...thx
|
RX8thunder: Blue; Door, Map, Glove Box, Trunk, Rear Dome
|
Footman: None required; Map, Front corners, Dome, License plate
|
Originally Posted by prospectjtaz
(Post 2644296)
Prospectjtaz: White; Door, Map, Glove Box, Trunk, Rear Dome
|
Update:
So I figured out the Vanity LED: http://a763.g.akamai.net/7/763/1644/...81128/size/224 Cost 4.99, also available in Blue. Now for 194 bulbs, essentially the rest of the light bulbs for the interior, we have two options: http://a763.g.akamai.net/7/763/1644/...81039/size/224 or http://app.infopia.com/img/image/fp/...35704/size/224 One is a 5 LED SMT, and the other is a 11 LED SMT. Which one should we go with? |
Not sure how bright 5 LED would be. Anyone have practical experience with these?
|
It has to depend on your application people.
Remember that the 194 is used in the front parking lamps, corners, all interior except for dome, and license plate. Certain sockets have protrusion limitations. For example, your door 194's are mounted straight. You have to measure the distance of clearance from the base to the lense. The map is a good example of a place where you can install a longer 194. The corners as well. The longest length is the front parking lights. Measure the clearance distance of each place that you want to install, and ensure that the lamp you choose will fit in there. |
Footman mentioned SMT in regards to his LEDS, I PMED him, he hasnt got back to me yet, just pmed him recently.
I also pmed Mazsurfer on his take. |
A search brought up an issue with one guy, he couldnt get the 5 LED SMT to fit in the Map Lights, but was able to get the 11 LED SMT into the Map Light.
What are you using in your interior Footman, how many LED SMTs? |
If you go ALL SMT's inside, they will be very very bright. If that is your cup of tea (for maximum brightness) then by all means go ahead.
I prefer the subtle hint for the doors, so I did not go SMT for the doors. I used a standard 5-high power LED (4 radial firing, 1 centre fire). Sometimes, you don't want it too bright in the unimportant areas. You don't need mega bright for glove box, so I also recommend AGAINST using SMT-LEDs for glove box. You may use SMT-LEDs in the trunk because that is actually useful to see how many bags of cocaine and weed you got left to sell in the parking lot when it's dark at night. I highly recommend that you check out my interior at night time to gauge what you want. If you want it just as bright as mine, then use similar components as I do. if you want brighter, go to SMT-LEDs throughout the interior. I am switching the dome from a 9-high power LED festoon to a 16 SMT-LED because the rear needed to be brighter. Again, this is all a matter of personal preference. The license plate, I am currently using a 4-LED white, but I realized since our cars have only a single lamp in the middle, the 4-LED white's light output angle is too narrow, so I am switching to something with a more wide spread beam (but again not too bright), hence I will not be using SMT-LEDs for the license plate. I highly recommend AGAINST using SMT-LED for rear license plate. Map Lights, measure the width and length of the hole and ensure that the width and length of your bulb fits. I am using a 6-LED RED in the maps, and realized again that the map lights housing have reflectors so I wasn't really making use of them with the narrow angle of the light of my LEDs. I am switching to SMT-LED's for the maps, and definitely picking some with radial-firing mounts to better make use of the reflectors in the base of the map lamps. The above are the recommendations I make. Everyone can definitely learn from the mistakes I made. |
thx for your input footman!
|
Pros,
I'm interested in the main dome light for the Miata. I'm pretty sure it's the same fonstoon light bulb for every Mazda. I ordered a big one for the applicaiton thinking it'll fit, but there's hardly any space in the main dome light. I think the max LED's that'll fit are 2 or 3 SMT LED's. Let me know the price. I'll take a look at the site and give you a reference. Thanks, |
What's happening with this? Jay are you still organizing it?
|
Originally Posted by prospectjtaz
(Post 2651248)
Update:
So I figured out the Vanity LED: http://a763.g.akamai.net/7/763/1644/...81128/size/224 Cost 4.99, also available in Blue. Now for 194 bulbs, essentially the rest of the light bulbs for the interior, we have two options: http://a763.g.akamai.net/7/763/1644/...81039/size/224 or http://app.infopia.com/img/image/fp/...35704/size/224 One is a 5 LED SMT, and the other is a 11 LED SMT. Which one should we go with? They are the "micro SMT" type LEDs and thus explains why the 11 LED would fit, but the 5 LED would not. Look carefully, they are smaller. |
yes I am, I talked to Kaffka, and we decide we would postpone this till next month. Spreading out the led group buys over the Christmas, less expensive.
October - Stealth Bulbs and Gaskets November - Inter LED December - Exterior Led and HID Fogs January - Clear Corners February - Piano Black Pillars |
cool I'm in for some stuff
|
I'd be interested for sure in a lot of these! Yay more "presents" this holiday!
|
FYI some LEDs posts with pics
|
I'm in for the group buy.
Here are the references just in case: Need 3 orders of these: http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 1 order of these: http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 2 orders of these: http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 and finally 1 order of these: http://www.v-leds.com/Shop/Control/P...d/0/SFV/32481# And I'm going to try this for the Miata: 1 order of these: http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 I'll need this for the dome on the Miata: http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Thanks Pros for doing this. This the first time trying v-leds. I usually get these from autolumination. But I'm curious to see if there's any difference. |
I'm in for this too. I want the LED lights for my interior in white.
|
Jay, do you want us to provide to you with the list of what we want similar to Neo's format?
|
Interior all blue here!
|
Footman,
I just wanted to ease Pros pain. Everyone can shout out interior or exterior, but he won't know what type of LED replacement you want. So I'm specific because I've done quite a few LED replacements already. I know what'll work and what won't. The only ones I haven't tried as of yet are the H11 and H3 alternatives. I didn't want to get another HID set to fill out those fog lights. So I'll give the LED units a try. I just want it to show up relatively white. It doesn't have to match exactly the HID low beam, but as long as they're not yellow, I'm happy. :) |
I will follow the same format as Neo, as I too have had some experience with these LEDs so I know exactly what I want.
|
Originally Posted by Footman
(Post 2685477)
I will follow the same format as Neo, as I too have had some experience with these LEDs so I know exactly what I want.
I don't - so whatever fits best, just add an order of blue for the inside bulbs :) |
Well, Jay said lets do stealth rear turn signal light in Oct first...this is probably pending for now...
October - Stealth Bulbs and Gaskets November - Inter LED December - Exterior Led and HID Fogs January - Clear Corners February - Piano Black Pillars |
Originally Posted by Thumper3322
(Post 2685525)
Footman you are already all red inside?
I don't - so whatever fits best, just add an order of blue for the inside bulbs :) I also need to change my stealth bulbs 194 to white LEDs. I'm going to sell them in the Stealth bulb thread. |
Alright the gaskets have been done, regarding the stealth light, I think I wanna go led for my rears and my fronts. So that leaves interior leds.
I am going white, so the lights are as follows. Map, Courtesy, Trunk, and I think Glove: http://www.v-leds.com/Shop/Control/P...s_per_page/100 http://app.infopia.com/img/image/fp/...35704/size/224 x3 and for the Dome light http://www.v-leds.com/Shop/Control/P...s_per_page/100 http://a763.g.akamai.net/7/763/1644/...67433/size/224 x1 and for Vanity http://www.v-leds.com/Shop/Control/P...s_per_page/100 http://a763.g.akamai.net/7/763/1644/...81128/size/224 x2 Im just gonna get Mazsurfer to check this and whoever that wants white is okay we can order by Friday. |
Is it now time to post what we want so you can order it for us?
|
post your stuff
|
Location: Dome
http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 Location: Vanity Mirror http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 2 Location: License Plate http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 Location: Map or Courtesy http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 Location: Map or Courtesy http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 Location: Front corners (clear corners) http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 Location: Front parking lights (the two closest to the middle) http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 Location: Front corners (clear corners) http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 Location: Front corners (clear corners) or Front parking lights (for that yellow in middle look) http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 Location: Glove box or Trunk or Front corners or Front parking lights http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481 Quantity: 1 |
Footman can you post what application each bulb will have if you dont mind?
Some are obvious, others arent. Just to give people an idea. |
Post editted. Bump
|
Hey Josh should we order you a set of ground effects?
https://www.rx8club.com/attachment.p...8&d=1161471473 |
You fuck up the install. you'll end up with what was found in Roxy.
|
Edited, think I'm gonna go with the 11 SMT all around for trunk, love, map and courtesy.
|
Originally Posted by Footman
(Post 2703618)
You fuck up the install. you'll end up with what was found in Roxy.
|
I want my car looks like UFO at night....
|
Pros,
I've posted my order exactly the way I want it. I'll find out if I'm going to need all the lights for the 6. It might be a different order by the end of the day. I'll keep you posted. |
Thanks for the update Neo, let me know how the 6 turns out. I have found a local who just recently put on the Mspeed exhaust. He lives by Bayview and 16th.
|
Originally Posted by prospectjtaz
(Post 2704290)
Thanks for the update Neo, let me know how the 6 turns out. I have found a local who just recently put on the Mspeed exhaust. He lives by Bayview and 16th.
|
LoL, you want a Speed 6 exhaust for your Greddy. Are you driving today?
|
Originally Posted by prospectjtaz
(Post 2704327)
LoL, you want a Speed 6 exhaust for your Greddy. Are you driving today?
|
Today is judgement day for that dealership. Either I pick up the 6 or I take back my mats along with my deposit.
I really hope the 6 pans out. We got it at a steal and it'll be tough to find something equivalent. In the meantime, I wouldn't mind hearing what that guys exhuast sounds like. We'll he be coming out to the AA meet tomorrow? |
All times are GMT -5. The time now is 07:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands