Install Meet on May 25
Established Date: Sunday May 25th
Time: 10 am, arrive whenever you can Place: Woodbine and 16th Ave Timmies, travel to my place from there Just wanted to get an idea of whos free next weekend for an install meet. The meet would be held at my place, my driveway or I might try and get a local garage, maybe the one from the prior meet or another for installs. Just would like a yes, no, maybe and what day is good for you guys. Also jot down any parts you might have that need to be installed, simple or large. 1. Prospectjtaz Yes Monday would be best, Can work with Saturday or Sunday. Parts: MS CAI, Exhaust, Midpipe, Strut Bar |
O, also I reside in Markham, ON just to give you guys a heads up. Probably do the install meet at my place and head down to Main Street Markham or Unionville (awesome places) for meal and drinks at the local Frucken.
|
Yes - nothing to install just wanna hang out don't care which day.
|
RX8thunder - Yes - Sat, Sun or Monday works
Parts waiting for installation (only some are DIY): MS CAI, exhaust and strut, Mazsport ignition mod and Mid-pipe, BHR clutch and flywheel, Under pulley, spark plugs |
i know al you others are reading thism look at the number of views, lets get some more people, if we get 10+, seafoam canisters on me.
Bring back Christmas! |
No.
Saturday: will be in Cambridge Sunday: Spending it with the gf Monday: Playing beach vball (assuming it doesn't rain) |
NO SOUP, i mean SEAFOAM FOR YOU!!!
|
I'm game.
|
i m good..
|
I'm definitely in if it's Monday :D
I've got no parts to install, but if anyone wants to help me clean my MAF sensor.... :D |
^^^ Thief ... np I'll do that it takes about 2 minutes or for u my friend 1 beer ;)
|
Originally Posted by rx8thunder
(Post 2455980)
RX8thunder - Yes - Sat, Sun or Monday works
Parts waiting for installation (only some are DIY): MS CAI, exhaust and strut, Mazsport ignition mod and Mid-pipe, BHR clutch and flywheel, Under pulley, spark plugs Do you have a complete set of pulleys or just the crank pulley? When I did mine I had a real bitch of a time with the Alternator pulley. Actually had to take it to a shop to get the nut off. |
I have a track day sunday night.....Monday works for me. turbo...you can pick up the mazspot mod then aswell.......I guess I will have to find something else to install on my car though?
|
another gauge gecko?
|
Originally Posted by wcs
(Post 2456288)
Scott I can help you out with all but the Clutch and Flywheel, that stuff is a little more tool intensive.
Do you have a complete set of pulleys or just the crank pulley? When I did mine I had a real bitch of a time with the Alternator pulley. Actually had to take it to a shop to get the nut off. |
Originally Posted by wcs
(Post 2456284)
^^^ Thief ... np I'll do that it takes about 2 minutes or for u my friend 1 beer ;)
|
Turbo8, you going? Give me a shout in MSN.
|
MS exhaust to install that is all.
Tools required: jack stands, wheel chocks (big rock will do) torque wrench WD40 socket set industrial sheers or cutters (to cut exhaust tip plastic bumper part) Weekend of May 24 is good. |
what happened to your trip?
|
My trip is May 15 - 20.
|
Originally Posted by Footman
(Post 2457824)
MS exhaust to install that is all.
Tools required: jack stands, wheel chocks (big rock will do) torque wrench WD40 socket set industrial sheers or cutters (to cut exhaust tip plastic bumper part) Weekend of May 24 is good. Add a big screw driver in your list to pry at the hanger bushings. |
The MS exhaust installation instructions call for 3 different torques on 3 sets of bolts. It also says to trim a 1" section off the inside portion of the exhaust tip bumper plastic.
|
Instructions inshmuckshions. Torque settings = pretty damn tight with arm strength.
Pop out the plastic bumper pieces as the first thing you do, then uninstall the old one and put in the new one. I didn't have to cut anything with the greddy. Hopefully the MS is the same. |
qtwre you are right....there really is no need to cut anything Andrew...and good luck getting a torque wrench under there......as tight as you can get them will do the trick.
|
I think the MS instructions want us to cut the 1" trim off the piece just in case it gets too hot and the plastic piece is too close, it will start melting the plastic. With the car up on a jack stands, can't I use a torque wrench?
Or perhaps a lift? |
I don't know if anyone has noticed, but it turns out the long weekend is this weekend coming up.
Victoria day is the 19th. So are we meeting up this weekend still? Or Monday I should say? |
Originally Posted by Footman
(Post 2458104)
I think the MS instructions want us to cut the 1" trim off the piece just in case it gets too hot and the plastic piece is too close, it will start melting the plastic. With the car up on a jack stands, can't I use a torque wrench?
Or perhaps a lift? |
Originally Posted by Neo
(Post 2458122)
I don't know if anyone has noticed, but it turns out the long weekend is this weekend coming up.
Victoria day is the 19th. So are we meeting up this weekend still? Or Monday I should say? |
Either way I'm good for a Monday. I was thinking the coming week since that's when the long weekend is, but either or is fine with me.
|
Ok. Just wanted to know, that's all.
Pros, Hook a brother up with those parts already! :) |
so its the 26th right??
|
26th is a Monday.
This is 24th Saturday. |
Hmm... which weekend are we talking about Jay? I thought it was this weekend but I'm ok, either way. Just anxious to get stuff put on the car
|
thread title is May 24th?
|
I think what he meant was May TWO FOUR weekend, which in most years, the Victoria Day weekend lands near the 24th. This year though, because May has 5 weeks, the third week (17 - 19) and hence May two four is earlier..... And I have a 3 paycheque month :D
|
I have a 3 paycheque month too!! BOOYAKASHA!!!
|
no I know the thread title is the 24th...but everyone is saying they are available on monday...which would be the 26th.....or was everyone talking about the 19th? If its the 24th I'm out. I have to go to a wedding in Ottawa. I guess it will ultimately be up to Jay as its his house.
|
I was getting confused with the whole long weekend.
But as it turns out, it's this weekend. The install will occur next weekend on the Sat. Which I'm good for. I hope I'll have somethings to install. :) |
Originally Posted by Neo
(Post 2458666)
I was getting confused with the whole long weekend.
But as it turns out, it's this weekend. The install will occur next weekend on the Sat. Which I'm good for. I hope I'll have somethings to install. :) The install shall be on Saturday May 17 or Monday May 19 (Victoria day). Is this correct? |
So many dates...
It'll have to be on a Sat. I don't think I'll be able to do anything on the Mon. I might have to go into work. :( |
LoL, wow, so many posts when I was away. Alright I meant May 24 weekend as in the 24 Weekend, holiday weekend, which in this case is the upcoming weekend. I was gauging interest to see who was available for Monday, if too many people had plans, to leave the city or somehting else, we would plan for another day. I figure we do installs on the Monday and then hit up a local pub here by my place for food, maybe the whiskey later on for entertainment and drinks if anyone is up for it.
So who can do the Monday May 19th, LONG WEEKEND Monday. And who perfers the weekend after, which in this case would be either a Saturday or a Sunday. Sorry for all the confusion guys. |
Guys I wanna have an awesome meet, so I will work to make sure everyone come out here. Ideally, I wanna see Gecko, Neo, Footman, Darkbrew, qwtre, wcs, rx8thunder, theif, agent008, proficientone, turboeight, r888 and anyone else at my place for an install meet. So let me know which would be the best for you guys.
|
It's about time Jay, where the heck have you been :) I can do the 19th!
Any word back on used rims? |
yep, still available, 19 x 9.5 45+ offset, he didnt answer if hes local so im emailed him again, IM GONNA GO BALLISTIC if I can get my Advan Model 5 by this weekend.
|
hopefully my ride will lost like this by summers end
https://www.rx8club.com/attachment.p...2&d=1175863142 |
I am out of town May 15 - 20. I am available for May 24 or 25.
|
Originally Posted by prospectjtaz
(Post 2459134)
yep, still available, 19 x 9.5 45+ offset, he didnt answer if hes local so im emailed him again, IM GONNA GO BALLISTIC if I can get my Advan Model 5 by this weekend.
|
i dont kno, thats what he said maybe a type o, of course i will check wheels out before i buy.
|
I prefer Monday the 19th, but Sunday the 25th is also fine.
|
I work nights on the 19th....but I can see if I can get it covered....the 25th I will be coming back from Ottawa an have a track day that night......I haven't officially signed up for it yet.....so depending on when everyone is meeting I might be able to go.....just a lot of driving for one day........anyways, I'll see what I can do.
|
All times are GMT -5. The time now is 03:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands